NEW QUESTION 1
a Company has a headquarters site and a remote site. Cisco Unified Communications Manager acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN
prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
Softphones can roam between two sites.
A roaming softphone uses the local gateway for all PSTN calls.
The user keeps home dial habits on a roaming softphone, with the exception of the emergency number. When a headquarters user uses a softphone at the remote site, the administrator notices that the PSTN calls are
still going via voice gateway in the headquarters. The administrator enabled Device Mobility in the system parameters and on all phones. What are the next two components that the administrator must check, according to the flow of Device Mobility operation? (Choose two.)

• A. IP address of the softphone
• B. Cisco Unified CM Group
• C. Device Mobility Info
• D. Physical Location
• E. Device Mobility Group

Answer: AE

NEW QUESTION 2
Which Cisco IOS command is used to display information for active connections that are controlled by the Media Gateway Control Protocol?

• A. show mgcp connection
• B. show mgcp statistics
• C. show mgcp endpoint
• D. show mgcp nas

Answer: A

NEW QUESTION 3
URI dialing is enabled between two clusters with the default options. The engineer that set up the URI dialing verified that all was working properly. However, a user from one of the clusters cannot dial using URI to a user in the same cluster. What do you do to resolve this issue?

• A. Verify the password that is used by the authentication under Intercluster Lookup Service configuration.
• B. Find out if the URI address of the called user has ACapital letter in the URI string.
• C. Verify that Intercluster Lookup Service is set up correctly.
• D. Verify USN Data Synchronization Status.

Answer: B

NEW QUESTION 4
Which reason for calls being disconnected just after connection is true?

• A. An incompatible MTP type is allocated to the call.
• B. Codec are mismatched between phones.
• C. Firewall is blocking RTP packets.
• D. Phone A is using SCCP and phone B is using SIP.

Answer: B

NEW QUESTION 5
An engineer integrated a voice gateway with Cisco Unified Communications Manager using H.323, but the calls through it are failing. Which debug command helps isolate this issue?

• A. debug call-mgmt
• B. debug ras
• C. debug voip ccapi inout
• D. debug mgcp errors
• E. debug ccsip error

Answer: C

NEW QUESTION 6
Cisco Unified Communications Manager is configured to collect H.245 and H 225 traces through the Cisco Serviceability web interface. What do you use to download and view the trace files?

• A. Cisco Unified OS Administration
• B. Cisco Unified Serviceability
• C. Bulk Administration > upload/DownloaDFiles
• D. Cisco Unified Real-Time monitoring Tool

Answer: D

NEW QUESTION 7
Jabber for Windows or MAC Soft Client fails to register with Cisco Unfed Communications Manager. This
excerpt is seen in the client logs.
DEBUG [0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)] [csf.sip-call-control][ccsip_get_exp_time_2xx]-SIPCC-SIP_REG:51/1,
ccsip_get_exp_time_2xx:Warning-Registration period received (120) minus configured timer_register_delta
(120) is less than 20 seconds.
DEBUG
[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state]
– SIPCC-SIP_STATE:51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING---->SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?

• A. Unified CM Device Assigned SIP Profile “Timer Register Delta”
• B. Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
• C. Unified CM Service Parameter “Station KeepAlive Interval”
• D. “KeepAlive_Timer” parameter in jabber-config xml file

Answer: B

NEW QUESTION 8
Refer to topology and Exhibits below:




After making AChange to a manually configured MGCP gateway, what step should you take to ensure that the gateway accepts the changes and be operational?

• A. Issue the commands no MGCP, then MGCP.
• B. Issue the commands no SCCP, then SCCP.
• C. Issue the commands Shut, then no shut.
• D. Issue the commands no CCM, then CCM.

Answer: A

NEW QUESTION 9
Which Cisco Unified Communications Manager troubleshooting tool can be used to determine the digit
manipulation path a Call takes within the Cisco Unified Communications Manager system from the perspective of a specific directory number, without having the actual device at hand?

• A. Cisco Unified Communications Manager Serviceability
• B. Cisco Unified Communications Manager Dialed Number Analyzer
• C. Cisco Unified Communications Manager Real Time Monitoring Tool
• D. Cisco Unified Syslog Viewer
• E. Cisco IOS debugs

Answer: B

NEW QUESTION 10
Which Cisco TelePresence Management Suite feature provides proactive suggestions for resolving error conditions and also provides ACentralized view of all statuses and configuration errors for managed devices?

• A. Cisco WebEx in Cisco TelePresence Management Suite
• B. Cisco TelePresence scheduling
• C. graphical monitoring
• D. ticketing service
• E. audit logging

Answer: D

NEW QUESTION 11
Which call control model does MGCP use?

• A. Distributed
• B. Centralized
• C. Ad hoc
• D. Hybrid

Answer: B

NEW QUESTION 12
An engineer is configuring Cisco Unified Communications Manager (CUCM) Version 10.0. The office manager of a remote office sends a request to set up a new phone that contains the MAC address of the phone (0AFC00021AB2) and the extension (2324). The engineer manually creates a new Cisco Unified IP Phone 7942 in CUCM, but the phone displays "Registration Rejected" when the user plugs the phone into the LAN. What should be done to fix this issue if autoregistration is already enabled in CUCM?

• A. Ensure that the phone extension is not already used on another set.
• B. Check the MAC address to make sure that it matches and that there are no extra Characters in the MAC address field.
• C. Check the Enterprise License Manager to ensure that the system is not out of licenses.
• D. Verify that the phone model being connected is the same type that is configured in CUCM.

Answer: D

NEW QUESTION 13
After you deploy cisco Unified Commutations Manager Device Mobility in your environment, you note that phones in a remote site are failing to register. Which two actions correct the problem? (Choose two.)

• A. Verify that the remote site is assigned to the device mobility group that matches its dialing pattern.
• B. Verify that the phones are attempting to register with the correct megACluster in the device pool of thecentral office.
• C. Verify that extension mobility is configured correctly for the remote site.
• D. verify that the LDAP server is configured to support device Mobility at the remote site.
• E. verify that the subnet of the remote site is configured in device mobility info.

Answer: CE

NEW QUESTION 14
You are experiencing bad video quality in calls, and you suspect packet loss in the network. Both the network switch and the collaboration endpoint network interfaces are set to autonegotiation, but the reported port speed and duplex settings do not match. Which action should you take?

• A. Set the collaboration endpoint to use a manual speed and duplex setting of 100 Mbps anDFull duplex, and keep the switch port setting as "auto."
• B. Configure the switch port to use a manual speed and duplex setting of 100 Mbps and half duplex, and keep the collaboration endpoint setting as "auto."
• C. Keep both the switch port and collaboration endpoint settings as "auto," because this configuration is not responsible for the mismatched settings that were reported.
• D. Set both the collaboration endpoint and the switch port to use manual speed and duplex settings of 100 Mbps anDFull duplex.

Answer: D

NEW QUESTION 15
Cisco Unified Communications Manager is deployed in a head office and also provides telephony services to remote regional offices. What is a possible cause of call setup issues with phones in the regional offices?

• A. remote office firmware for phones
• B. codec mismatch in region information settings
• C. end user roles and groups
• D. physical location configuration

Answer: B

NEW QUESTION 16
An engineer implemented a new voice gateway using H.323 to integrate with Cisco Unified Communications Manager (CUCM) and is experiencing issues routing calls via the gateway, even though the network connectivity is working. The engineer wants to verify that the gateway is properly configured. What is an indication of correct configuration?

• A. Successful ping from CUCM to the gateway
• B. Gateway IP address in CUCM
• C. Trace route from the gateway to CUCM
• D. Gateway registration status in CUCM

Answer: B

NEW QUESTION 17
An engineer is configuring a new conference resource on a Cisco 2911 ISR router. The router has a single PVDM3-32 and one PRI with 23 voice channels. When the engineer configured the conference profile on the router, the following message is received.
Vr-2911-east(config)#dspfarm profile 10 conferenceDspfarm profile 10 :: No resource, check voice card or dspfarm service is not configured
Which configuration should the engineer add before adding the conference bridge profile?

• A. voice-card 0 dsp services dspfarm dspfarm
• B. voice-card 0 codec complexity medium dsp services dspfarm
• C. voice-card 0 codec complexity flex dsp services dspfarm
• D. voice-card 0 dsp tdm pooling dspfarm

Answer: A

NEW QUESTION 18
Partitions can be assigned to which two items? (Choose two)

• A. directory numbers
• B. trunks
• C. devices
• D. gateways
• E. IP phones

Answer: AD

NEW QUESTION 19
Which command is used to check if an MGCP gateway is currently registered with Cisco CallManager?

• A. Router# show ccm-manager gateway
• B. Router# show mgcp ccm-manager
• C. Router# show ccm-manager
• D. Router# show ccm manager

Answer: C

NEW QUESTION 20
The link from your local Cisco Unity Connection site to another site has gone down. While troubleshooting, you discover that the local gateway is unable to reach a DNS server. Which action can you take to reestablish the link?

• A. Restart the Connection Manager series on the local gateway
• B. Create an intersite link manually using the IP address of the remote gateway.
• C. Synchronize the two Cisco Unity Connection sites.
• D. Create an intersite link manually using the FQDN of the remote gateway.
• E. Configure the directory synchronization task schedule on the remote gateway.

Answer: A