NEW QUESTION 1
Which two constructs allow for configuration of VLANs on specific uplink ports? (Choose two.)

• A. LAN pin group
• B. adapter policies
• C. vNIC templates
• D. VLAN manager
• E. link profiles
• F. VLAN groups

Answer: AC

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-0-2/b_GUI_Config_Guide/ http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-0-2/b_GUI_Config_Guide/

NEW QUESTION 2
Which VMware ESXi 5.0 CLI command will validate PassThru interfaces when they are available?

• A. vem status -v
• B. vempassthru-v
• C. vemintf -v
• D. vemifconfig -v
• E. vempts -v

Answer: A

NEW QUESTION 3
Which port type mode must be used on a Cisco UCS Manager for a SPAN port?

• A. eth-traffic-mon
• B. eth-uplink
• C. eth-server
• D. eth-storage

Answer: A

NEW QUESTION 4
What are the three main components of the VM-FEX environment? (Choose three.)

• A. Red Hat Network Satellite server
• B. ESX host with Cisco UCS M81KR VIC
• C. ESX host with Cisco UCS M72KR CAN
• D. VMware vCenter
• E. VMware Update Manager
• F. Cisco UCS Manager
• G. Cisco VSG

Answer: BDF

NEW QUESTION 5
This question concerns the power system of a Cisco Unified Computing System. Drag the options on the left to the right side in the correct order.

Answer:

Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Infrastructure-M

NEW QUESTION 6
What is the Overlay Transport Virtualization site VLAN used for?

• A. to allow multiple site AEDs to communicate with each other
• B. to detect devices at the site that are not capable of OTV
• C. to facilitate communications between OTV edge devices within the site
• D. to allow the join interfaces at different sites to communicate

Answer: C

NEW QUESTION 7
You have a Cisco UCS server connected to Cisco Fabric Interconnects. Which two options are characteristics of a virtual machine that is deployed by using VMFEX in high-performance mode in this environment? (Choose two.)

• A. The virtual machine connects to a Cisco VIF on the external switch by using Cisco VN-Link in hardware, bypassing the hypervisor.
• B. The dynamic vNIC can connect redundantly by using hardware-based failover to the Cisco UCS Fabric interconnect cluster.
• C. Dynamic vNICs inherit parameters from static vNICs
• D. The virtual machine can share the same dynamic vNIC with another virtual machine in VMFEX highperformance mode
• E. The virtual machine deployed in VM-FEX high-performance mode runs on the host by using the default BIOS policy that is available in the Cisco UCS Manager

Answer: AB

Explanation: In high-performance mode, traffic to and from a virtual machine (VM) bypasses the DVS and hypervisor. Traffic travels directly between VMs and the virtual interface card (VIC) adapter.
The benefits of high-performance mode are as follows:
-Increases I/O performance and throughput.
-Decreases I/O latency.
-Improves CPU utilization for virualized I/O-intensive applications. You must modify or create several policies in order for VM-FEX for VMware to function optimally:
-VMwarePassThrough Ethernet Adapter Policy (high-performance mode only)
-Dynamic vNIC Connection Policies
-BIOS Policy (high-performance mode only)
-VM Lifecycle Policy
Dynamic vNICs are always protected in Cisco UCS, but this field allows you to select a preferred fabric, if any. You can choose one of the following:
-Protected Pref A—Cisco UCS attempts to use fabric A but fails over to fabric B if necessary
-Protected Pref B—Cisco UCS attempts to use fabric B but fails over to fabric A if necessary Protected—Cisco UCS uses whichever fabric is available
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/b_GUI_V

NEW QUESTION 8
Which policy would you change to form a port channel between a Cisco UCS 6248 and a Cisco UCS 2208?

• A. link aggregation policy
• B. chassis discovery policy
• C. IOM connection policy
• D. link discovery policy

Answer: B

NEW QUESTION 9
Refer to the exhibit

Fabric Interconnect B is in a primary state. Which IP addresses can you use to connect to Fabric Interconnect B?

• A. 10.0.0.198, 10.0.0.199 and 10.0.0.200
• B. 10.0.0.199 only
• C. 10.0.0.199 and 10.0.0.200 only
• D. 10.0.0.200 only

Answer: C

NEW QUESTION 10
Which statement about the Cisco Integrated Management Controller configuration utility for Cisco UCS CSeries servers is true?

• A. To connect to the Cissco Integrated Management Controller GUI, you must use a web browser that supports SSL3 and HTLM5.
• B. To connect to the Cissco Integrated Management Controller GUI, you must use a web browser that supports HTTP and Microsoft Silverlight.
• C. While in BIOS, you can configure the Cisco In Management Controller to use a static IP address only.
• D. While in BIOS, you can configure the Cisco Integrated Management Controller to use a static IP address or an IP address from DHCP
• E. When the IP address is configured in BIOS, you can point a Web browser to the configured IP address to open the Cisco Integrated Management Controller GUI.

Answer: D

Explanation: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c200-m1-high-density-rack-mountse

NEW QUESTION 11
Which item describes the failure scenario called a "split-brain" in the Cisco Unified Computing System?

• A. failure of the Cisco Unified Computing System L1-L2 network
• B. failure of a Cisco Unified Computing System Chassis Management Controller
• C. failure of a Cisco Unified Computing System I/O module
• D. failure of a Cisco Unified Computing System Fabric Interconnect
• E. failure of a Cisco Unified Computing System Chassis Management Switch

Answer: A

NEW QUESTION 12
Which statement is true regarding backup operations in Cisco UCS Manager?

• A. A user can perform incremental backups of a system configuration.
• B. Passwords and other sensitive information are encrypted in full state backups.
• C. Scheduled backups are not available.
• D. Each backup destination can have multiple backup operations.

Answer: B

NEW QUESTION 13
A network administrator has configured all required settings for the Smart Call Home feature in Cisco UCS. What must be done next?

• A. Open a TAC case to verify contract information and start the registration process.
• B. Generate a fault to initiate a message that will start the registration process.
• C. The system automatically starts the registration process and no further action is required.
• D. Send a system inventory message to start the registration process.

Answer: D

NEW QUESTION 14
Which boot option must be present in the boot policy to have the option to manually boot from the FlexFlash Secure Digital card?

• A. any configuration
• B. FlexFlash state
• C. local disk
• D. remote virtual drive

Answer: C

NEW QUESTION 15
You need to configure a new Fibre Channel port channel from the Cisco UCS Manager GUI. To do this, from the SAN tab, you navigate to SAN Cloud > Fabric A or B > FC Port Channels, and you click the plus sign. In the popup window, you specify the Fibre Channel port channel name and ID.
Which two rules should you follow when you set the Fibre Channel port channel name and ID? (Choose two.)

• A. The Name field must be a number.
• B. The ID field can contain ASCII characters, except for spaces.
• C. The Name field is optional, but it cannot contain spaces.
• D. TheFibre Channel port channel ID is optional.
• E. TheFibre Channel port channel ID must be a number.

Answer: CE

Explanation: The identifier for the port channel.
Enter an integer between 1 and 256. This ID cannot be changed after the port channel has been saved. Name field A user-defined name for the port channel.
This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name after the object has been saved.
The Fibre Channel port channel ID is NOT optional
The ID field CANNOT contain ASCII characters, OR spaces. The Name field must be a number IS NOT CORRECT.
The Fibre Channel port channel ID must be a number. IS CORRECT The Name field is optional, but it cannot contain spaces. IS CORRECT
The name field is optional (notice the "Next >" button is available when the name field is empty.

NEW QUESTION 16
Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Adapter errors ………………………………………configurations.

We are working on which Chassis ID?

• A. 1
• B. 2
• C. 3
• D. 4
• E. 5

Answer: A

NEW QUESTION 17
Which consideration must be made while performing backup operations within the Cisco UCS Manager?

• A. Rerunning an existing backup operation overwrites the existing backup file.
• B. Scheduled backups are not available.
• C. A user can perform incremental backups of a system configuration.
• D. Each backup destination can have multiple backup operations.

Answer: A

NEW QUESTION 18
Which three options are true regarding port profiles in Cisco UCS Manager? (Choose three.)

• A. Port profiles define operating-system kernel parameters.
• B. Port profiles are represented as a port group in vCenter.
• C. Port profiles can be used by more than one DVS.
• D. Port profile parameters are visible on vCenter.
• E. Port profile parameters can be modified from vCenter.
• F. Port profiles can be modified only from Cisco UCS Manager.

Answer: BCF

NEW QUESTION 19
You have a Cisco UCS C-Series Server. What can you use to log the blade server statistics?

• A. the Cisco Integrated Management Controller log
• B. RADIUS
• C. LDAP
• D. the XML API

Answer: A

Explanation: Reference:
http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-cseries-rack-servers/datasheet-c