Cisco 400-151 Dumps Questions 2021

Act now and download your today! Do not waste time for the worthless tutorials. Download with real questions and answers and begin to learn with a classic professional.

Also have 400-151 free dumps questions for you:

NEW QUESTION 1
Refer to the exhibit.
400-151 dumps exhibit
Which two options can be determined by the Cisco UCS environment? (Choose two)

  • A. Three FCoE attached servers are on the FI
  • B. Seven FCoE attached servers are on the FI
  • C. The Cisco UCS is in end-host mode
  • D. The Cisco UCS is in FC switch mode
  • E. Five FCoE attached servers are on the FI

Answer: AD

Explanation: Note: The above answer is correct, some portals may confuse and mention 5 servers, but if you see ‘Node Name‘field, it has 3 unique node names with 5 vNICs associated between them.

NEW QUESTION 2
Which option lists valid configuration commands to help identify packet flows for ingress and egress
IP packets and provide statistics based on packet flows when configuring a Cisco Nexus Device via the CLI?

  • A. NetFlow Record, NetFlow Exporter, NetFlow
  • B. Flow Record, Flow Exporter, Flow Monitor
  • C. IPFix Record, IPFix Exporter, IPFix Monitor
  • D. sFlow Record, sFlow Exporter, sFlow

Answer: B

NEW QUESTION 3
Which two statements about OpenStack are true? (Choose two)

  • A. Nova is the compute component that is used to manage and automate the provisioning ofcompute resources
  • B. horizon is the component that is used for IP address management
  • C. Keystone is the networking component that is used to create and manage network resources
  • D. how is the GUI web application that is used to control and configure different OpenStackcomponents
  • E. neutron is the networking component that is used to create and manage networkresources

Answer: AE

NEW QUESTION 4
Refer to the exhibit.
400-151 dumps exhibit
Which option describes the main purpose of the XML messages?

  • A. Shut down an existing port group profile
  • B. Delete an existing port group profile
  • C. Modify an existing port group profile
  • D. Create a new port group profile

Answer: D

NEW QUESTION 5
Which option lists the goals of LISP?

  • A. Redirection, scalability, optimized routing, client independence, address family agnostic
  • B. Redirection, scalability, OTV replacement, client independence, address family agnostic
  • C. Redirection, scalability, optimized routing, client independence, address family agnostic, BGP replacement
  • D. Redirection, scalability, optimized routing, client independence, address family agnostic, Layer 4 routing

Answer: A

Explanation: https://www.cisco.com/c/dam/en/us/products/collateral/ios-nx-os-software/locator-id-separation-protocol-lisp/lisp-vm_mobility_wp.pdf

NEW QUESTION 6
Refer to Exhibit:
400-151 dumps exhibit
Which option is the minimum number of vNICS required by the service profile to connect to all available Vlans

  • A. 6
  • B. 7
  • C. 3
  • D. 1

Answer: C

NEW QUESTION 7
Refer to the exhibit.
400-151 dumps exhibit
When you attempt to apply a new service profile in cisco USC Manager, you are presented with these
error messages. Which cause is the most probable?

  • A. No more UUIDs are available in the pool to be assigned
  • B. The service profile is tied to a server pool that has no available blades
  • C. The service profile is using more vNICs than the physical adapter can support
  • D. The service profile is using more vHBAs than the physical adapter can support

Answer: B

NEW QUESTION 8
Refer to the exhibit.
400-151 dumps exhibit
After you upgrade Cisco UCS firmware, some of your blades have these error messages. Which description of the problem is true?

  • A. Storage provisioning is not configured
  • B. Some components are deprecated
  • C. vNIC template must be converted to updating
  • D. Service profile requires a connectivity policy

Answer: D

NEW QUESTION 9
Refer to the exhibit
400-151 dumps exhibit
When configuring enhanced vPC for a dual-home server, where vPC port-channel command must be configured?

  • A. A, B and C
  • B. vPC configyuration is not required when using dual-home FEX
  • C. C only
  • D. A and b

Answer: A

NEW QUESTION 10
Which three configuration can be different between EVPN vPC peers? (Choose three.)

  • A. Using a different secondary IP address
  • B. Consistent NVE1 binding to the same loopback interface
  • C. Consistent VLAN to VN-segment mapping
  • D. Consistent VNI to group mapping
  • E. Using the same primary IP addresses
  • F. Loopback primary IP address

Answer: AEF

NEW QUESTION 11
Which two statements about the Cisco Open SDN Controller are true? (Choose two.)

  • A. It is a commercial distribution based on the OpenFlow controller.
  • B. Your own, new network service functions can be added via Java APIs.
  • C. Security is enforced by using the Open Services Gateway Initiative framework.
  • D. The controller is available as an appliance only.
  • E. It can be used in multivendor environments.

Answer: BE

NEW QUESTION 12
DRAG DROP
Drag and drop the feature on the left to their correct benefit on the right
400-151 dumps exhibit

    Answer:

    Explanation: A goes to C
    B goes to D
    C goes to A
    D goes to B

    NEW QUESTION 13
    DRAG DROP
    Drag and drop the term about BFD session parameters from the left onto the correct definition on the right?
    400-151 dumps exhibit

      Answer:

      Explanation: 400-151 dumps exhibit

      NEW QUESTION 14
      A network architect must migrate the legacy infrastructure switches of a customer from a Cisco
      Nexus 9000 platform. Which process helps achieve this milestone?

      • A. Create a container providing separate execution space
      • B. Manage software upgrades via guest shell
      • C. Allow guests temporary access to the CLI without logging in
      • D. Set up a web-based interface for configuration management

      Answer: A

      NEW QUESTION 15
      Refer to the exhibit.
      400-151 dumps exhibit
      An admin wants to bring online a new leaf node into their ACI fabric. Before registering the leaf node, the admin checks the current status and sees this output. Which option is the reason for the admin to see this output?

      • A. The DHCP server running on the APIC has failed and thus the leaf node has not been able to obtain an IP address.
      • B. The leaf node is yet to be physically connected to the fabric.
      • C. This output is expected until the admin registers the leaf node with an ID and name.
      • D. This output is expected until the admin registers the leaf node and assigns it a role.
      • E. The wrong catalog firmware is running on the APIC.

      Answer: E

      NEW QUESTION 16
      Refer to the exhibit.
      400-151 dumps exhibit
      Which feature is shown in this configuration?

      • A. policy-based routing
      • B. Optimized Edge Routing
      • C. quality of service
      • D. performance routing

      Answer: A

      NEW QUESTION 17
      In an ACI fabric, which three types of interface are supported on border leaf switches to connect to
      an external router? (Choose three)

      • A. sub interface with 802 1Q tagging
      • B. 1GbE Interface
      • C. any interfaces that supports VXLAN encapsulation
      • D. Layer 3 interface
      • E. 10GbE interface
      • F. switch virtual interface

      Answer: ADF

      Explanation: Using More than two Border leaf Switches
      Border leaf switches support three types of interfaces to connect to an external router:
      • Layer 3 (routed) interface
      • Sub interface with IEEE 802.1Q tagging
      • Switched Virtual Interface (SVI)

      NEW QUESTION 18
      The OS team has requested that you expand the receive queues of an existing server. Which action accomplishes this change?

      • A. Reconfigure the default vNIC behavior
      • B. Reconfigure the vNIC to the requested queue size
      • C. Configure and apply a custom LAN connectivity policy
      • D. Configure and apply a custom adapter policy

      Answer: D

      Explanation:
      https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_0101 01.html

      NEW QUESTION 19
      Refer to the exhibit.
      400-151 dumps exhibit
      Which two types of encapsulations can used in each switching mode. When utilizing the Cisco
      Application Virtual Switch in ACL fabric? (Chooes two)

      • A. No local switching : VXLAN
      • B. No local switching :vlan or vxlan
      • C. Local switching : VXLAN
      • D. Local switching : VLAN
      • E. Local switching: VLAN OR VXLAN

      Answer: AE

      Thanks for reading the newest 400-151 exam dumps! We recommend you to try the PREMIUM Certleader 400-151 dumps in VCE and PDF here: https://www.certleader.com/400-151-dumps.html (276 Q&As Dumps)