NEW QUESTION 1
Which two descriptions of the Cisco 7000 RISE Technology are true? (Choose two.)

• A. RISE enables remote inspection of control plane traffic to address security concerns.
• B. RISE can provide ADC offload freeing resources in the ADC.
• C. RISE enables remote inspection of data plane traffic to address security concerns
• D. RISE enables a physical appliance to appear as a service module in the Cisco Nexis 7000 chassis
• E. RISE can be utilized to provide management capabilities for non-Cisco routers.

Answer: DE

NEW QUESTION 2
Which two cluster interface types are valid when integrating a Layer 4 –Layer 7device in an ACI
Fabric? (Choose two)

• A. outside
• B. inside
• C. provider
• D. consumer
• E. control

Answer: CD

NEW QUESTION 3
Which three descriptions of the advantages of using a Layer 4 – Layer 7 service graph in the ACI Fabric are true? (Choose three)

• A. It provides a template that can be reused multiple times
• B. Only virtual Layer 4 – Layer 7 devices are required
• C. It makes manual VLAN assignments
• D. It automatically connects vNICs
• E. No contracts are required between consumer and provider EPGs
• F. It updates ACLs and pools automatically with endpoint discovery

Answer: ADF

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.pdf

NEW QUESTION 4
Refer to the exhibit.

Which option is the correct configuration for DC-NYC?

• A. feature otvotv site-identifier 0000 0000 0002otv site-vlan 1000interface Overlay 1otv join-interface port-channel 1001otv use-adjacency-server 10.1.1.1 unicast-onlyotv extend-vlan 10,12,14,18-19,24,34,37,52,56-69,75-79,86-87,99,102-103,106,116,120,122
• B. feature otvotv site-identifier 0x2 otv site-vlan 1000interface Overlay 1otv join-interface port-channel 1001otv adjacency-server unicast-onlyotv use-adjacency-server 10.1.1.1 unicast-onlyotv extend-vlan 10,12,14,18-19,24,34,37,52,56-69,75-79,86-87,99,102,103,106,116,120,122
• C. feature otvotv site-identifier 0x2 otv site-vlan 1000interface Overlay 1otv join-interface port-channel 1001 otv adjacency-server unicast-onlyotv use-adjacency-server 10.2.2.2 unicast-onlyotv extend-vlan 10,12,14,18-19,24,34,37,52,56-69,75-79,86-87,99,102-103,106,116,120,122
• D. feature otvotv site-identifier 0x2 otv site-vlan 1000interface Overlay 1otv join-interface port-channel 1001otv use-adjacency-server 10.1.1.1 unicast-onlyotv extend-vlan 10,12,14,18,19,24,34,37,52,56-69,75-79,86-87,99,102,103,106,116,120,122

Answer: B

NEW QUESTION 5
Assume that ucsd-dcloud cisco.com is the correct address of the cisco UCS Director server.Which two
options are prerequistes to access the cisco UCS Director REST API interface? (choose two)

• A. Run the dbgtoken utility and ask TAC to generate a response cookie
• B. Submit the usemame/password to http://ucsd-dcloud cisco.com/api/access to obtain session cookie
• C. Obtain the REST API Access Key code for the User Information dialog box
• D. Obtain the developer token from cisco Devnet
• E. Enable the Developer menu on the Adcanced tab of the User Information dalogbox

Answer: CE

NEW QUESTION 6
DRAG DROP
Drag and drop the VTP mode from left onto the correct description on the right.

Answer:

Explanation: Transparent – relays all VTP protocol packets that it receives o trunk port to all other trunk ports
dServer – creates, removes and modifies VLANs over the entire network
Client – cannot create, change or delete VLANs
Off – Does not forward any VTP packets

NEW QUESTION 7
A cloud service provider is designing a large multitenant data center to support thousands of tenants. The provider is concerned about the scalability of the Layer 2 network and providing Layer 2 segmentation to potentially thousands of tenants.
Which Layer 2 technology is best suited in this scenario?

• A. LDP
• B. VXLAN
• C. extended VLAN ranges
• D. VRF

Answer: B

Explanation: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-729383.html

NEW QUESTION 8
An administrator is replacing an IOM. The failed IOM is in chassis 1 and was connected to FI-B. the replacement IOM has an older version of software to the fabric interconnect. Which description is the correct process to bring the replacement IOM into the environment?

• A. Install the replacement IOM and connect a single cabl
• B. Monitor the software auto-upgrade using the show fexdetall command from Cisco NX OS CL
• C. Connect the remaining cables when the upgrade is complete.
• D. Install replacement IOM and connect all cable
• E. Monitor the software auto-upgrade using the show fex detall command from Cisco NX OS CLI.
• F. Downgrade the fabric interconnect to match the IOM versio
• G. Connect all cables and bring the IOM onlin
• H. Upgrade the fabric interconnect and IOM to match the system.
• I. Install the replacement IOM and connect a single cabl
• J. Perform a firmware update of IOM, then activate with the matching code for fabric interconnect Reackonwledge the chassis.
• K. Decommission the chassi
• L. Install the replacement IOM and connect all cable
• M. Perform a firmware update of IOM the activate with the matching code for the fabric interconnect Reackonwledge the chassis.

Answer: B

NEW QUESTION 9
Refer to the exhibit.

Which two characteristics can you tell about the device connected on e1/1 from the output from the Cisco UCS CLI? (Choose two)

• A. The device supports Ethernet only
• B. This device supports FCoE
• C. The device is a B-Senries server
• D. The device is a C-Series server
• E. This device supports PoE

Answer: BD

NEW QUESTION 10
A user wants to allow VLANs 1-3967 on a pure Layer 2 FabricPath spine with the least amount of configuration required. Which configuration is correct?

• A. Vlan3967 mode fabric pathInterface eth(fabricpath core interface) switchport mode fabricpath
• B. Vlan 1mode fabricpath fabncpath mode transit
• C. Vlan 1-3967mode fabricpathInterface eth(fabricpath core interface) switchport mode fabncpath
• D. Vlan 1-3967Interface eth( fabricpath core interface) switchport mode trunkswitchport trunk allowed vlan all

Answer: C

NEW QUESTION 11
Which method is the best way to troubleshoot a specific workflow execution in UCSD?

• A. Check the specific SR log.
• B. Generate techsupport and submit it to the TAC workflow analysis tool.
• C. Enable debug log first, the check the infrastructure logs.
• D. Open the infrastructure log.

Answer: A

NEW QUESTION 12
DRAG DROP
Drag and drop the enlisted four offers from the left onto the correct Cisco ONE Enterprise Cloud Suite on the right.

Answer:

Explanation:

NEW QUESTION 13
Which two statements about IP Source Guard are true? (Choose two)

• A. IP Source Guard limits IP traffic on an interface to only those sources that have an IPMAC address binding table entry or static IP source entry
• B. IP Source Guard requires that DHCP snooping is disabled
• C. When you first enable IP Source Guard on an interface, you may experience disruption in IP traffic until the hosts on the interface receive a new IP address from a DHCP server
• D. By default,IP Source Guard is enable on all interfaces
• E. IP Source Guard is independent of DHCP anooping to build and maintain the IP-MAC address binding table

Answer: AC

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_2/security/configuration/guide/n1000v_security/n1000v_security_14sourceguard.pdf

NEW QUESTION 14
What is the correct location where the DPDK libraries run?

• A. User space
• B. Network Space
• C. Kernel Space
• D. Disk Space

Answer: A

NEW QUESTION 15
Which two options are valid span configurations for a Cisco Nexus 1000 series Switch? (Choose2)

• A. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-4 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/2
• B. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 3/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/5
• C. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 3/1 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 3/2
• D. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 3/5
• E. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/5

Answer: CE

NEW QUESTION 16
Refer to the exhibit.

Which condition executes the Add DNS server task"?

• A. true
• B. failed
• C. undefined
• D. false

Answer: C

NEW QUESTION 17
Which two guidelines and limitations of NetFlow on Cisco NX-OS are true? (Choose two)

• A. The Cisco Nexus 2000 Series Fabric Extender does not support bridged NetFlow
• B. If you change a Layer 2 interface to a Layer 3 interfac
• C. the software converts the Layer 2 NetFlow to Layer 3 NetFlow automatically
• D. Only Layer 2 NetFlow is applied on Layer 2 interfaces, and only Layer 3 NetFlow is applied on Layer 3 interfaces
• E. You must configure a source interfac
• F. If you do not configure a source interface, the exporter remains in a disabled state
• G. It is optional to configure a valid record name

Answer: DE

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_15netflow.html#pgfId-1088665

NEW QUESTION 18
What is the recommended monitoring threshold for Memory in Cloud Center platform?

• A. Free memory is less than 10% on a regular basis
• B. Free memory is less than 15% on a regular basis
• C. Free memory is less than 5% on a regular basis
• D. Free memory is less than 25% on a regular basis
• E. Free memory is less than 20% on a regular basis

Answer: A

NEW QUESTION 19
In a Cisco UCS B-Series environment, which option must the network adapters support to enable
iSCSI boot?

• A. vNIC
• B. UEFI
• C. iBFT
• D. MPIO
• E. CIMC

Answer: C