How Does Testking Microsoft 70-342 free exam Work?

we provide Breathing Microsoft 70-342 actual test which are the best for clearing 70-342 test, and to get certified by Microsoft Advanced Solutions of Microsoft Exchange Server 2013. The 70-342 Questions & Answers covers all the knowledge points of the real 70-342 exam. Crack your Microsoft 70-342 Exam with latest dumps, guaranteed!

Q31.  (Topic 6) 

You have an Exchange Server 2013 organization that contains one office in Los Angeles and one office in New York. 

All servers have the Mailbox server role and the Client Access server role installed and are members of a data availability group (DAG) named DAG1. The servers and databases are shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that if the active copy of LADB01 fails, a server in the same site will attempt to activate a copy of the database before a server in another site does. The 

solution must not influence the activation of other database copies. 

Which command should you run? 

A. Set-databaseavailabilitygroupserver -identity dagl-alternatewitnessserverfs2 

B. Set-mailboxserver-identity ex6 autodatabasemountdial bestavailability 

C. Suspend-mailboxdatabasecopy-identity ladb01\\ex6 -activationonly 

D. Set-mailboxdatabasecopy -identity ladb01\\ex2-activationpreference l 



Use the Set-MailboxDatabaseCopy cmdlet to configure the properties of a database copy. 

With this cmdlet, you can configure the replay lag time, truncation lag time, and activation 

preference value for a mailbox database copy. 

/ activationpreference 

The ActivationPreference parameter value is used as part of Active Manager's best copy 

selection process and to redistribute active mailbox databases throughout the database 

availability group (DAG) when using the RedistributeActiveDatabases.ps1 script. The value 

for the ActivationPreference parameter is a number equal to or greater than 1, where 1 is at 

the top of the preference order. The position number can't be larger than the number of 

database copies of the mailbox database. 


Not C: Use the Suspend-MailboxDatabaseCopy cmdlet to block replication and replay 

activities (log copying and replay) or activation for a database configured with two or more 

database copies. 

/ Identity 

The Identity parameter specifies the name of the database copy being suspended. 

/ ActivationOnly 

The ActivationOnly switch specifies whether to suspend only activation for the mailbox 

database copy. 

Q32. HOTSPOT - (Topic 6) 

You company has two offices. The offices are located in Los Angeles and New York. 

You manage an Exchange Server 2013 organization. 

A database availability group (DAG) named DAG1 contains servers from the Los Angeles office and servers from the New York office. There are copies of all the databases on all of the servers. The New York office is the primary data center and hosts all of the active database copies. As well as the witness server. 

You run the Get-DatabaseAvailabilityGroup command and you receive the following output. 

Select the correct option of below answer area now. 


Q33. HOTSPOT - (Topic 1) 

You need to resolve the IRM template issue. 

Which user right should you modify? 

To answer, select the appropriate user right in the answer area. 


Q34. DRAG DROP - (Topic 6) 

You work for a financial services company that has an Exchange Server 2013 organization. 

Mailbox audit logging is enabled for all mailboxes. 

The company identifies the following requirements for the sales department: 

. The manager of the sales department must be able to search for email messages that contain specific key words in the mailboxes of the users in the sales department. 

. The manager of the human resources department must receive a report that contains a list of all the sales users' mailboxes that were searched by the sales manager. 

You need to identify which tasks must be performed to meet the requirements. 

Which tasks should you identify? 

To answer, drag the appropriate task to the correct requirement in the answer area. Each task may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. 


Q35. DRAG DROP - (Topic 6) 

Your company has two offices. Each office is configured as an Active Directory site. The sites are named Site1 and Site2. 

You have an Exchange Server 2013 organization that is configured as shown in the following exhibit. (Click the Exhibit button.) 

Datacenter Activation Coordination (DAC) mode is enabled on the database availability group (DAG) named DAG1. 

You are testing a site failover by shutting down all of the servers in Site1. 

You need to mount the databases in Site2. 

Which four commands should you run in sequence? (To answer, move the appropriate four commands from the list of commands to the answer area and arrange them in the correct order. More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.) 


Q36.  (Topic 6) 

You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table. 

You deploy Microsoft Lync Server 2010. You need to create a Lync Server SIP Unified 

Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server. 

Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.) 

A. Server1 

B. Server2 

C. Server3 

D. Server4 

E. Server5 

Answer: A,B,E 


A: You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010. You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging. 

B, E: 

* Requirements and Recommendations Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers. 

* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM. 

Reference: Configuring Unified Messaging on Microsoft Exchange Server to Work with Lync Server 2013 

Q37.  (Topic 4) 

You need to recommend a solution that meets the compliance requirements for email messages that contain information about the Fabrikam acquisition. 

Which three actions should you recommend? (Each correct answer presents part of the solution. Choose three.) 

A. Create an Outlook protection rule. 

B. Create a new custom message classification. 

C. Modify the registry on all client computers. 

D. Modify the Content Filtering settings. 

E. Export the Message Classification configuration to an .xml file. 

Answer: B,C,E 


B: Use the New-MessageClassification cmdlet to create a message classification instance 

in your organization. 

E: After you create a new message classification, you can specify the message 

classification as a transport rule predicate. Before Microsoft Outlook and Outlook Web App 

users can apply the message classification to messages, you must update the end-user 

systems with the message classification XML file created by the Export-OutlookClassification.ps1 script file. The Export-OutlookClassification.ps1 script file is 

located in the %ExchangeInstallPath%Scripts directory. 

C: Microsoft Office Outlook requires a local file (Classifications.xml) that contains 

definitions of the message classifications that Microsoft Exchange Server supports before 

Outlook users can apply message classifications to their messages. You must also create 

a registry key that enables message classification and references the Classifications.xml 

file on the Outlook user's computer. 

* From scenario: 

Compliance Requirements include: 

Users must use a custom message classification when they send email messages that 

contain information about the planned acquisition of Fabrikam. 

Q38. HOTSPOT - (Topic 6) 

Your company implements Exchange Server 2013 Unified Messaging (UM). 

The company uses an auto attendant. 

You need to ensure that when calls are routed to the auto attendant, callers can press 0 to 

reach a receptionist. 

Which option should you configure from the UM Auto Attendant window? To answer, select 

the appropriate option in the answer area. 


Q39.  (Topic 2) 

You need to recommend an auditing solution that meets the compliance requirements. What should you recommend? 

A. Export the mailbox audit log. 

B. Run an administrator role group report. 

C. Run a non-owner mailbox access report. 

D. Export the administrator audit log. 



* Scenario: All administrative changes made to the mailboxes must be tracked. 

* You can use administrator audit logging in Microsoft Exchange Server 2013 to log when a user or administrator makes a change in your organization. By keeping a log of the changes, you can trace changes to the person who made the change, augment your change logs with detailed records of the change as it was implemented, comply with regulatory requirements and requests for discovery, and more. 

Reference: Administrator audit logging 

Q40.  (Topic 3) 

You need to identify which technologies must be deployed to meet the Office 365 coexistence requirements. 

Which two technologies should you identify? (Each correct answer presents part of the solution. Choose two.) 

A. the Microsoft Online Services Directory Synchronization tool 

B. Active Directory Federation Services (AD FS) 2.0 

C. Active Directory Rights Management Services (AD RMS) 

D. an internal root CA 

E. Active Directory Lightweight Directory Services (AD LDS) 

Answer: A,B 


* Scenario: Contoso identifies the following Office 365 coexistence requirements: 

/ Office 365 users must be able to access their mailbox by using their Active Directory user 

account in Contoso. 

/ On-premises users must be able to share free/busy information and calendar information with the Office 365 users. 

A: When you create an Office 365 mailbox in Exchange Online in a hybrid deployment, the mail user is created in Active Directory on-premises. Directory synchronization, if it's configured, automatically synchronizes this new user object to Office 365, where it’s converted to a cloud mailbox in Exchange Online. You can create Office 365 mailboxes as regular user mailboxes, resource mailboxes for meeting rooms and equipment, and shared mailboxes. 

B: Step-By-Step: Setting up AD FS and Enabling Single Sign-On to Office 365 

Microsoft 70-342 Certification Sample Questions and Answers:

P.S. New 70-342 dumps PDF: