70-342 cbt nuggets (49 to 64)

Realistic of 70-342 test question materials and cram for Microsoft certification for IT specialist, Real Success Guaranteed with Updated 70-342 pdf dumps vce Materials. 100% PASS Advanced Solutions of Microsoft Exchange Server 2013 exam Today!

2016 Apr 70-342 Study Guide Questions:

Q49. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization and a Microsoft SharePoint Server 2013 server farm. 

The SharePoint server farm contains the servers shown in the following table: 


You plan to use a SharePoint eDiscovery Center. 

You need to recommend which component must be deployed before you can use the SharePoint eDiscovery Center for In-Place eDiscovery. 

What should you recommend? To answer, select the appropriate options in the answer area. 


Answer: 



Q50.  (Topic 6) 

You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed. 

You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers. 

What should you do first? 

A. On each Client Access server, start the Certificates console and run the Certificate Import Wizard. 

B. From the Exchange Admin Center, create a new certificate request. 

C. On all of the Client Access servers, run the Get-ExchangeCertificate cmdlet. 

D. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the BinaryEncoding parameter. 

Answer: B 

Explanation: 

Configuring server certificates In Exchange 2013, you can use the Certificate Wizard to request a digital certificate from a certification authority. After you’ve requested a digital certificate, you’ll need to install it on the Client Access server. 

Reference: Exchange 2013 Client Access server configuration 

https://technet.microsoft.com/en-us/library/hh529912(v=exchg.150).aspx 


Q51. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization that contains three servers named EX1, EX2, and EX3 in a single Active Directory site. All of the servers are members of a database availability group (DAG) named DAG1. Each server has a copy of all the mailbox databases. 

You discover that the copies of a database named DB1 are in a FailedAndSuspended state due to disk failures on EX2 and EX3. 

You replace the disks. 

You need to start seeding DB1 on EX2 from EX1. The solution must ensure that DB1 can be seeded on EX3 simultaneously. 

What command should you run? To answer, select the appropriate options in the answer area. 


Answer: 



Q52. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization. 

You run Get-OutlookAnywhere -Server EX1 | fl and you receive the following output. 


Use the drop-down menus to select the answer choice that completes each statement. 


Answer: 



Q53. DRAG DROP - (Topic 6) 

You have an Exchange Server 2013 organization that has Information Rights Management 

 (IRM) configured. 

Users report that they cannot apply IRM protection to email messages from Outlook Web 

App. 

You verify that the users can protect the messages by using IRM from Microsoft Outlook. 

You need to recommend a solution to ensure that the users can protect email messages by 

using IRM from Outlook Web App. 

Which four actions should you recommend? 

To answer, move the four appropriate actions from the list of actions to the answer area 

and arrange them in the correct order. 


Answer: 



70-342 answers

Update failed 70-342:

Q54.  (Topic 6) 

You have an Exchange Server 2013 organization. 

A user is involved in a possible litigation matter. 

You need to protect all of the messages in a mailbox from permanent deletion. 

Which cmdlet should you use? 

A. Enable-InboxRule 

B. Add-MailboxPermisssion 

C. Set-Mailbox 

D. Set-Retention Policy 

Answer: C 

Explanation: 

This example configures April Stewart's mailbox to retain deleted items for 30 days. 

Set-Mailbox -Identity - "April Stewart" -RetainDeletedItemsFor 30 

Note: When a user deletes items from the Deleted Items default folder by using the Delete, 

Shift+Delete, or Empty Deleted Items Folder actions, the items are moved to the 

Recoverable Items\Deletions folder. The duration that deleted items remain in this folder is 

based on the deleted item retention settings configured for the mailbox database or the 

mailbox. 

Incorrect: 

Not D: The Set-Retention Policy is used in a cloud environment only. 

Reference: Configure Deleted Item retention and Recoverable Items quotas 

https://technet.microsoft.com/en-us/library/ee364752%28v=exchg.150%29.aspx 


Q55.  (Topic 6) 

You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table. 


You deploy Microsoft Lync Server 2010. You need to create a Lync Server SIP Unified 

Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server. 

Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.) 

A. Server1 

B. Server2 

C. Server3 

D. Server4 

E. Server5 

Answer: A,B,E 

Explanation: 

A: You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010. You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging. 

B, E: 

* Requirements and Recommendations Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers. 

* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM. 

Reference: Configuring Unified Messaging on Microsoft Exchange Server to Work with Lync Server 2013 


Q56.  (Topic 6) 

Your company has an Exchange Server 2010 organization. 

The network contains an internal root certification authority (CA). 

You plan to add a disclaimer to all email messages sent by users in the company. 

You need to ensure that the disclaimer can be added to encrypted email messages. 

What should you do? 

A. Instruct users to encrypt email messages by using IRM only. 

B. Instruct users to encrypt email messages by using S/'MIME only. 

C. Enable the Content Filter agent on all of the Hub Transport servers. 

D. Modify the priority of the Transport Rule agent on all of the Hub Transport servers. 

Answer: A 


Q57.  (Topic 6) 

You have an Exchange Server organization that contains four servers. The servers are configured as shown in the following table. 


You are deploying Unified Messaging (UM). 

You create a dial plan named UMPlan1 and a UM mailbox policy named UMPlan Mailbox Policy. 

You need to ensure that all voice mail sent to the existing extension of a user is delivered to the user's mailbox. 

Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) 

A. Create a UM hunt group 

B. Create a UM IP gateway. 

C. Configure the IP-PBX to route calls to EX3 and EX4 

D. Configure the IP-PBX to route calls to EX I and EX2. 

E. Assign EX I and EX2 to UMPlan1. 

F. Assign EX3 and EX4 to UMPlan1. 

Answer: A,B,C 

Explanation: 

* When you’re setting up Unified Messaging (UM), you must configure the IP PBXs on your 

network to communicate with the Client Access servers running the Microsoft Exchange 

Unified Messaging Call Router service and the Mailbox servers running the Microsoft 

Exchange Unified Messaging service in your Exchange organization. You must also 

configure the Client Access and Mailbox servers to communicate with the IP PBXs. 

C: A Unified Messaging (UM) IP gateway represents a physical Voice over IP (VoIP) 

gateway, IP Private Branch eXchange (PBX), or session border controller (SBC) hardware 

device. 

* Here are the basic steps for connecting VoIP gateways, IP PBXs, SIP-enabled PBXs, or 

SBCs to Client Access and Mailbox servers: 

Step 1: Install the Client Access and Mailbox servers in your organization. 

Step 2: Create and configure a Telephone Extension, SIP URI, or E.164 UM dial plan. 

Step 3: Create and configure a UM IP gateway. You must create and configure a UM IP 

gateway for each VoIP gateway, IP PBX, SIP-enabled PBX, or SBC that will be accepting 

incoming calls and sending outgoing calls. 

Step 4: Create a new UM hunt group if needed. If you create a UM IP gateway and don’t 

specify a UM dial plan, a UM hunt group will be automatically created. 

Incorrect: 

B, D: The question states, “You need to ensure that all voice mail sent to the existing extension of a user is delivered to the user's mailbox”. The dial plan is therefore a Telephone Extension dial plan. Client Access and Mailbox servers cannot be associated with Telephone Extension or E.164 dial plans. 


Q58.  (Topic 6) 

You have an Exchange Server 2013 organization that contains 10 servers. 

You have a federation trust to the Microsoft Federation Gateway. The certificate in the trust relationship expires soon. 

You need to replace the certificate. The solution must minimize downtime. 

You purchase a new certificate. 

What should you do next? 

A. On all of the Exchange servers, import the certificate, and then run the New-FederationTrust cmdlet. 

B. On all of the Exchange servers, import the certificate, and then run the Set-OrganizationRelationship cmdlet. 

C. On one of the Exchange servers, import the certificate, and then run the Set-FederationTrust cmdlet. 

D. On one of the Exchange servers, import the certificate, and then run the Set-FederatedOrganizationldentifier cmdlet. 

Answer: C 

Explanation: 

You can use the Set-FederationTrust cmdlet to manage the certificates used for the federation trust. You can also use the Set-FederationTrust cmdlet to refresh the metadata document from the Microsoft Federation Gateway and download its certificate. 

Example: This example configures the federation trust Microsoft Federation Gateway to use the certificate with the thumbprint AC00F35CBA8359953F4126E0984B5CCAFA2F4F17 as the next certificate. Set-FederationTrust -Identity "Microsoft Federation Gateway" -Thumbprint AC00F35CBA8359953F4126E0984B5CCAFA2F4F17 


70-342 exams

Guaranteed exchange 70-342:

Q59.  (Topic 6) 

You are a network administrator for a company named Contoso, Ltd. 

You install the Active Directory Rights Management Services server role on a server. The Active Directory Rights Management Services (AD RMS) server uses an internal certification authority (CA) for all certificates. 

You plan to provide users with the ability to use AD RMS to protect all of the email messages sent to a partner company named A. Datum Corporation. 

ADatum does not have AD RMS deployed. 

You need to identify which components from the Contoso network must be accessible to A. Datum to ensure that the users at A. Datum can open protected messages. 

Which two components should you identify? (Each correct answer presents part of the solution. Choose two.) 

A. The Active Directory domain controllers 

B. The Client Access servers 

C. The certificate revocation list (CRL) 

D. The Mailbox servers 

E. The AD RMS cluster 

Answer: A,C 

Explanation: 

A:

 The users in Adatum will need an account on a domain controller in Contoso to open a protected message. 

C. The certificate used to secure the message will need to be checked against a certificate 

revocation list (CRL). 


Q60. DRAG DROP - (Topic 3) 

You need to create a federation trust for the planned organization relationship. 

Which three actions should you perform? 

To answer, move the three appropriate actions from the list of actions to the answer area 

and arrange them in the correct order. 


Answer: 



Q61. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization named contoso.com. 

Contoso.com has a federated trust to another Exchange Server 2013 organization named 

fabrikam.com. 

You need to ensure that users from fabrikam.com can view the availability of users in contoso.com. 

What command should you run? To answer, select the appropriate options in the answer area. 


Answer: 



Q62. HOTSPOT - (Topic 4) 

You are attempting to resolve the email delivery issue for Fabrikam. 

You need to identify which certificate is being used by the servers in the Exchange Server organization of Fabrikam. 

In which directory on EX1 should you review the log files? (To answer, select the appropriate directory in the answer area.) 


Answer: 



Q63. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization. 

You plan to implement a hybrid deployment with Microsoft Office 365. Active Directory Federation services (AD FS) will be used to provide Single Sign-On (SSO). Users will access the hybrid deployment by using Microsoft Outlook 2013 and mobile devices. 

A user named User1 changes the password for his on-promises Active Directory user account. 

You need to identify whether User1 will be prompted for a password when accessing his mailbox from various client types. 

In the table below identify whether User1 will be prompted for a password when accessing his mailbox from various clients. 

NOTE: Make only one selection in each row. 


Answer: 



Q64. DRAG DROP - (Topic 6) 

You have an Exchange Server 2013 organization that contains two Mailbox servers and two Client Access servers. 

You have an Active Directory Rights Management Services (AD RMS) cluster. Information Rights Management (IRM) is enabled for the Exchange Server organization. 

All company executives are in a security group named Execs. All of the executives use smartphones that are managed by using a mobile device mailbox policy. The executives frequently read IRM-protected email messages by using Microsoft Outlook. 

You need to ensure that the executives can read the IRM-protected messages on their smartphone. 

Which task should you perform in each environment? (To answer, drag the appropriate tasks to the correct environments. Each task may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: 




see more 70-342 - Advanced Solutions of Microsoft Exchange Server 2013

Microsoft 70-342 Certification Sample Questions and Answers: http://www.braindumpsall.net/70-342-dumps/

P.S. New 70-342 dumps PDF: http://www.4easydumps.com/70-342-dumps-download.html