Far out 70-342: Pass4sure real practice exam from 81 to 96

Guaranteed of 70-342 exam fees materials and bootcamp for Microsoft certification for consumer, Real Success Guaranteed with Updated 70-342 pdf dumps vce Materials. 100% PASS Today!

2016 Mar 70-342 Study Guide Questions:

Q81. HOTSPOT - (Topic 6) 

Your company implements Exchange Server 2013 Unified Messaging (UM). 

The company uses an auto attendant. 

You need to ensure that when calls are routed to the auto attendant, callers can press 0 to 

reach a receptionist. 

Which option should you configure from the UM Auto Attendant window? To answer, select 

the appropriate option in the answer area. 


Answer: 



Q82.  (Topic 4) 

You need to implement a solution that meets the compliance requirements for the members of the legal department. 

Which two cmdlets should you use? (Each correct answer presents part of the solution. Choose two.) 

A. New-RoleAssignmentPolicy 

B. Add-ManagementRoleEntry 

C. New-ManagementRoleAssignment 

D. New-ManagementRole 

E. New-ManagementScope 

Answer: C,D 

Explanation: 

* From scenario: 

/ Only the users in the legal department must be able to use eDiscovery to view the 

contents of email messages sent by the finance department users. 

/ Users in the legal department use a shared mailbox named Legal. Legal is enabled for In-

Place Hold. Legal is the only mailbox on DB2. 

We need to assign the role to the legal department users using the New-

ManagementRoleAssignment cmdlet. 

To restrict the eDiscovery access to the finance users emails, we need to create a scope 

using the New-ManagementScope cmdlet. 


Q83. HOTSPOT - (Topic 5) 

You need to recommend a solution to audit the issue of User1. 

Which command should you recommend? (To answer, select the appropriate options in the answer area.) 


Answer: 



Q84. DRAG DROP - (Topic 6) 

Your company has two offices. Each office is configured as an Active Directory site. The sites are named Site1 and Site2. 

You have an Exchange Server 2013 organization that is configured as shown in the following exhibit. (Click the Exhibit button.) 


Datacenter Activation Coordination (DAC) mode is enabled on the database availability group (DAG) named DAG1. 

You are testing a site failover by shutting down all of the servers in Site1. 

You need to mount the databases in Site2. 

Which three commands should you run in sequence? (To answer, move the appropriate three commands from the list of commands to the answer area and arrange them in the correct order.) 


Answer: 



Q85.  (Topic 6) 

You have an Exchange Server 2010 organization named adatum.com. 

All public folders are stored on a server named EX5. 

You deploy a new server named EX6. EX6 has Exchange Server 2013 installed. 

You move all mailboxes to EX6. 

You need to move the public folders to EX6. The solution must ensure that users can access the public folders after EX5 is decommissioned. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. On EX6, create a public folder mailbox. 

B. On EX6, run the New-PublicFolderMigrationRequest cmdlet. 

C. On EX5, modify the replication partners for all of the public folders. 

D. On EX6, run the New-SiteMailboxProvisioningPolicy cmdlet. 

E. On EX5, assign the FolderOwner permission to the Public Folder Management management role group for all of the public folders. 

F. On EX6, run the MoveAllReplicas.ps1 script. 

Answer: A,B 

Explanation: 

B: Use the New-PublicFolderMigrationRequest cmdlet to begin the process of migrating public folders from Microsoft Exchange Server 2007 or Exchange Server 2010 to Exchange Server 2013. 

Note: See step 4 and 5 below. 

Step 1: Download the migration scripts Step 2: Prepare for the migration Step 3: Generate the .csv files Step 4: Create the public folder mailboxes on the Exchange 2013 server Step 5: Start the migration request Example: New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server <Source server name>) -CSVData (Get-Content <Folder to mailbox map path> -Encoding Byte) -BadItemLimit $BadItemLimitCount 

Step 6: Lock down the public folders on the legacy Exchange server for final migration 

(downtime required) 

Step 7: Finalize the public folder migration (downtime required) 

Step 8: Test and unlock the public folder migration 


70-342 free exam questions

Down to date 70-342 practice exam:

Q86.  (Topic 6) 

You have an Exchange Server 2013 organization and a Microsoft Lync Server 2013 environment. 

You plan to integrate Lync Server 2013 and Exchange Server 2013 Unified Messaging (UM) services. 

You need to identify which actions will complete when you run the exchucutil.psl Windows PowerShell script. 

Which three actions should you identify? Each correct answer presents part of the solution. 

A. A UM hunt group will be created for each UM IP gateway 

B. Permission to read Active Directory UM container objects will be assigned to the Lync server 

C. The TLS listening port will be changed on the Client Access servers 

D. The Lync server will be added to the SIP dial plan 

E. A UM IP gateway will be created for each Lync Server pool 

F. A UM auto attendant will be created for each UM IP gateway 

Answer: A,B,E 

Explanation: 

When you’re integrating Microsoft Lync Server with Exchange Unified Messaging (UM), you have to run the ExchUcUtil.ps1 script in the Shell. The ExchUcUtil.ps1 script does the following: 

* Creates a UM hunt group for each UM IP gateway. The pilot identifier of each hunt group specifies the UM SIP URI dial plan used by the Lync Server Front End pool or Standard Edition server that’s associated with the UM IP gateway. 

* Grants Lync Server permission to read Active Directory UM container objects such as UM dial plans, auto attendants, UM IP gateways, and UM hunt groups. 

* Creates a UM IP gateway for each Lync Server pool. 

Reference: Configure UM to work with Lync Server 

https://technet.microsoft.com/en-us/library/jj966276%28v=exchg.150%29.aspx 


Q87.  (Topic 6) 

You have an Exchange Server 2013 organization. 

You create a data loss prevention (DLP) policy. The mode of the DLP policy is set to Enforce. You need to ensure that email messages containing social security numbers from the 

United States are blocked. 

Which two possible rules achieve this goal? (Each correct answer presents a complete 

solution. Choose two.) 

A. U.S. State Breach: Allow Override 

B. U.S. State Breach: Scan email sent outside - low count 

C. U.S. State Breach: Scan email sent outside - high count 

D. U.S. State Breach: Scan text limit exceeded 

E. U.S. State Breach: Attachment not supported 

Answer: B,C 

Explanation: 

Note: 

* In Microsoft Exchange Server 2013, you can use data loss prevention (DLP) policy 

templates to help meet the messaging policy and compliance needs of your organization. 

These templates contain pre-built sets of rules that can help you manage message data 

that is associated with several common legal and regulatory requirements. 

* DLP policy templates in Exchange include: 

U.S. State Breach Notification Laws 

Helps detect the presence of information subject to U.S. State Breach Notification Laws, 

including data like social security and credit card numbers. 


Q88. HOTSPOT - (Topic 6) 

Your network contains two Active Directory sites named Site1 and Site2. 

You have an Exchange Server 2013 organization that contains six servers. The servers are configured as shown in the following table. 


All of the mailbox databases replicate to all of the servers. 

Users in Site1 connect to sitel-mail.contoso.com to access their mailbox. Users in Site2 connect to site2-mail.contoso.com to access their mailbox. All of the users use Microsoft Outlook 2013. 

You need to identify which DNS modification must be made to fail over the email services from Site1 to Site2. 

Which DNS modification should you identify? (To answer, select the appropriate record to modify and the new data for the record in the answer area.) 



Answer: 



Q89.  (Topic 6) 

You have an Exchange Server 2013 organization that has Unified Messaging (UM) 

enabled for all mailboxes. 

The organization is configured to use an IP gateway to connect to a legacy PBX. 

An administrator recently performed some configuration changes. 

After the changes, users report that their voice mail is no longer being delivered to their 

Exchange Server mailbox. The users do not report any other problem. 

You need to identify which configuration change causes the issue. Which cmdlet should you run? 

A. Test-UMConnectivity 

B. Test-CsExUMConnectivity 

C. Test-ExchangeUMCallFlow 

D. Test-CsExUMVoiceMail 

Answer: A 

Explanation: 

Use the Test-UMConnectivity cmdlet to test the operation of a Mailbox server computer running the Microsoft Exchange Unified Messaging service. 

Two diagnostic tests are designed to test the operation of the Microsoft Exchange Server 2013 Mailbox server software (mode 1) and the operation of the whole system that includes the connected telephony components (mode 2). The Test-UMConnectivity cmdlet can be used to test the operation of a Mailbox server and related connected telephony equipment. When you run this cmdlet and include the UMIPGateway parameter, the Mailbox server tests the full end-to-end operation of the Unified Messaging system. This test includes the telephony components connected to the Mailbox server, such as IP gateways, Private Branch eXchanges (PBXs), and cabling. If the UMIPGateway parameter isn't specified, the Mailbox server tests only the operation of the Unified Messaging components that are installed and configured on the server. 

Incorrect: Not B: Test-CsExUMConnectivity Verifies that a test user can connect to Exchange Unified Messaging. This cmdlet was introduced in Lync Server 2013. Not C: Test-ExchangeUMCallFlow Use the Test-ExchangeUMCallFlow cmdlet to test call flow between Client Access servers running the Microsoft Exchange Unified Messaging Call Router service, Mailbox servers running the Microsoft Exchange Unified Messaging service, VoIP gateways, IP PBXs, Session Initiation Protocol (SIP) servers and Microsoft Lync Server. 


Q90. HOTSPOT - (Topic 1) 

You need to ensure that the HR1 group can perform the tasks required to meet the 

technical requirements. 

To which group should you add HR1? 

To answer, select the appropriate group in the answer area. 


Answer: 



70-342 exam price

100% Correct 70-342 free question:

Q91. HOTSPOT - (Topic 5) 

You need to recommend a solution to audit the issue of User1. 

Which command should you recommend? (To answer, select the appropriate options in the answer area.) 



Answer: 



Q92.  (Topic 6) 

Your company has offices in Montreal, New York, and Toronto. 

Each office is configured as an Active Directory site. The Montreal office has a site link to the New York office. The New York office has a site link to the Toronto office. 

You have an Exchange Server 2013 organization that contains five Mailbox servers. The organization is configured as shown in the exhibit. (Click the Exhibit button.) 


The servers in the Montreal and Toronto offices are members of a database availability group (DAG) named DAG01. DAG01 contains two databases name TOMBX and MTLMBX. 

MTLMBX is active on EX1 and contains all of the mailboxes of the users in the Montreal office. 

TOMBX is active on EX3 and contains all of the mailboxes of the users in the Toronto office. 

You need to ensure that all email messages transmitted between the Montreal users and the Toronto users are routed through EX5. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Run the Set-MailboxTransportService cmdlet on EX5. 

B. Make EX5 the source server for all of the Send connectors. 

C. Create a separate DAG for each of the Montreal and Toronto offices. 

D. Add EX5 to DAG01. 

E. Configure the New York office as a hub site. 

Answer: C,E 

Explanation: 

Routing in Exchange 2013 is now fully aware of Database Availability Groups (DAGs), and uses DAG membership as a routing boundary. You use the Set-AdSite cmdlet to specify an Active Directory site as a hub site. Whenever a hub site exists along the least-cost routing path for message delivery, the messages are queued and are processed by the Transport service on Mailbox servers in the hub site before they're relayed to their ultimate destination. You can configure any Active Directory site as a hub site. However, for this configuration to work correctly, you must have at least one Mailbox server in the hub site. 


Q93.  (Topic 6) 

Your company has a data center in New York and a data center in Miami. 

The company has an Exchange Server 2013 organization that contains a database availability group (DAG). The DAG contains servers in both data centers. 

The company plans to deploy Outlook Anywhere to all users. 

You configure the following: 

. All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com. 

. All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com. 

. In each data center, a certificate from an enterprise certification authority (CA) is 

configured to contain the following: 

. A certificate principal name of mail.contoso.com . Subject alternate names of mail.contoso.com and miami.mail.contoso.com 

You need to recommend which task must be performed to meet the following requirements: 

. Users always must attempt to connect first to a server in the data center where their mailbox is located. . Users must be able to access their mailbox if a single data center fails. 

What should you recommend? 

A. Change the external host name of the Miami data center to mail.contoso.com. 

B. Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers. 

C. Run the Set-OutlookProvider cmdlet. 

D. Run the Add-AvailabilityAddressSpace cmdlet. 

Answer: B 

Explanation: 

* The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the parameters listed in the Parameters section. 

* The AutoDiscover feature in Exchange 2007/2010 is often overlooked during setup but is 

an important factor in ensuring smooth day to day running of your Exchange environment. Its main function is to provide the mail client with all the configuration options it needs, from only the user's email address and password. This is particularly useful for remote users and smartphone users, who no longer have to enter advanced settings like server names and domains. It is also vital for the correct functioning of features such as Out Of Office and the Offline Address Book in Outlook. 


Q94. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization that contains the servers configured as 

shown in the following table. 


All of the Exchange servers run Windows Server 2012 R2 and are members of a database availability group (DAG) named DAG1. 

A mailbox database named DB1 replicates between EX1, EX2, EX3, and EX7. The mailbox database copy of DB1 on EX7 is a lagged database. 

You need to ensure that if the number of healthy database copies of DB1 is less than three during a 24-hour period, the logs in the lagged database replay automatically. 

What command should you run? To answer, select the appropriate options in the answer area. 


Answer: 



Q95. DRAG DROP - (Topic 6) 

You have a server that has Exchange Server 2013 installed. 

You plan to configure Unified Messaging (UM) to connect to an IP-PBX. 

A telecommunications administrator configures the following numbers on the IP-PBX: 

First extension number: 12100 

Last extension number: 12499 

Help extension number: 12500 

Incoming pilot number: 12000 

You need to configure UM to support the following requirements: 

Users must be able to use Outlook Voice Access. 

Users must be able to receive voice mail when callers connect to the users' extension. 

Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus. 

Which numbers should you use for the UM configurations? 

To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. 


Answer: 



Q96.  (Topic 6) 

You need to ensure that users in the organization are notified before they send email messages to external recipients. 

Which cmdlet should you run? 

A. Set-Mailbox. 

B. Set-OrganizationConfig. 

C. Set-TransportAgent. 

D. Set-TransportConfig. 

Answer: B 


Microsoft 70-342 Certification Sample Questions and Answers: http://www.braindumpsall.net/70-342-dumps/

P.S. New 70-342 dumps PDF: http://www.4easydumps.com/70-342-dumps-download.html