Secrets to mcsa 70 410 pdf

It is more faster and easier to pass the Microsoft 70 410 exam questions and answers pdf exam by using Downloadable Microsoft Installing and Configuring Windows Server 2012 questuins and answers. Immediate access to the Up to date 70 410 installing and configuring windows server 2012 pdf Exam and find the same core area 70 410 exam questions with professionally verified answers, then PASS your exam with a high score now.

Q101. - (Topic 3) 

Your network contains two subnets. The subnets are configured as shown in the following table. 

You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit. 

You need to ensure that Server2 can communicate with the client computers on LAN2. 

What should you do? 

A. Change the metric of the 10.10.1.0 route. 

B. Set the state of the Teredo interface to disable. 

C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable. 

D. Run route delete 172.23.2.0. 

Answer:

Explanation: 

You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent. 


Q102. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2. 

You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1. 

To which group should you add User1? 

A. Hyper-V Administrators on Server1 

B. Administrators on VM1 

C. Server Operators on Server1 

D. Power Users on VM1 

Answer:

Explanation: 

The user has to be an administrator on VM1 to be able to install features. 

In Windows Server 2012 R2, the Server Manager console and Windows PowerShell-cmdlets for 

Server Manager allow installation of roles and features to local or remote servers, or offline 

virtual hard disks (VHDs). 

You can install multiple roles and features on a single remote server or offline VHD in a 

single Add Roles and Features Wizard or Windows PowerShell session. You must be 

logged on to a server as an administrator to install or uninstall roles, role services, and 

features. If you are logged on to the local computer with an account that does not have 

administrator rights on your target server, right-click the target server in the Servers tile, 

and then click Manage As to provide an account that has administrator rights. The server 

on which you want to mount an offline VHD must be added to Server Manager, and you 

must have Administrator rights on that server. 

References: 

Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: 

Implementing Group Policy, p.539 


Q103. - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the 

installation fails repeatedly. 

You need to ensure that the feature can be installed on Server1. 

What should you do? 

A. Install Windows Identity Foundation (WIF) 3.5. 

B. Install the Web Server (IIS) server role. 

C. Connect Server1 to the Internet. 

D. Run the Add-AppxProvisionedPackage cmdlet. 

Answer:

Explanation: 

The files needed are no longer available on the local Hard drive. We need to connect the server to the Internet. Important to note that when starting with Windows Server 2012 R2 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update. By default, if feature files are not available on the destination server that is running Windows Server 2012 R2 Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to Windows Update. You can override the default behavior by configuring a Group Policy setting or specifying an alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard GUI or a command line. 


Q104. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed. 

Contoso.com has a server, named ENSUREPASS-SR07, which has four network adapters. Contoso.com has two SR07’s network adapters are connected to the one LAN, local area networks (LANs). Two of ENSUREPASS – while the other two are connected to the other LAN. 

You are required to configure one of the network adapter pairs into a network adapter team. 

Which of the following actions should you take? 

A. You should consider accessing the Group Policy Management Console (GPMC) on ENSUREPASS-SR07. 

B. You should consider accessing the TS Manager console on ENSUREPASS-SR07. 

C. You should consider accessing the Server Manager console on ENSUREPASS-SR07. 

D. You should consider accessing the Remote Desktop Gateway Manager console on ENSUREPASS-SR07. 

Answer:


Q105. - (Topic 3) 

Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. 

You need to add an RODC to the domain by using the Install From Media (IFM) option. 

Which tool should you use to create the media? 

A. the ntdsutil command 

B. the Set-ADDomain cmdlet 

C. the Install-ADDSDomain cmdlet 

D. the dsadd command 

E. the dsamain command 

F. the dsmgmt command 

G. the net user command 

H. the Set-ADForest cmdlet 

Answer:

Explanation: You can use the Ntdsutil.exe tool to create installation media for additional domain controllers that you are creating in a domain. By using the Install from Media (IFM) option, you can minimize the replication of directory data over the network. This helps you install additional domain controllers in remote sites more efficiently. 

Reference: Installing AD DS from Media 

https://technet.microsoft.com/en-us/library/cc770654(v=ws.10).aspx 


Q106. DRAG DROP - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You need to create a new volume on Server1. 

The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands? 

To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order. 

Answer: 


Q107. HOTSPOT - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. 

You need to identify whether the Company attribute replicates to the global catalog. 

Which part of the Active Directory partition should you view? 

To answer, select the appropriate Active Directory object in the answer area. 

Answer: 


Q108. - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has six network adapters. Two of the network adapters are connected to a network named LAN1, two of the network adapters are connected to a network named LAN2, and two of the network adapters are connected to a network named LAN3. 

You create a network adapter team named Team1 from the two adapters connected to LAN1. You create a network adapter team named Team2 from the two adapters connected to LAN2. 

A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP. 

You need to identify how many DHCP reservations you must create for Server1. 

How many reservations should you identify? 

A. 3 

B. 4 

C. 6 

D. 8 

Answer:

Explanation: 

1 for each NIC Team (2 total) and 1 for each non-teamed NIC (2 total) -> 4 total IP addresses are required. 


Q109. - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2. 

You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192. 

You need to ensure that Scope1 has a subnet mask of 255.255.255.0. 

What should you do first? 

A. From the DHCP console, reconcile Scope1. 

B. From the DHCP console, delete Scope1. 

C. From the DHCP console, modify the Scope Options of Scope1. 

D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet. 

Answer:

Explanation: 

You cannot change the subnet mask of a DHCP scope without deleting the scope and 

recreating it with the new subnet mask. 

Set-DhcpServerv4Scope does not include a parameter for the subnet mask. 


Q110. - (Topic 3) 

You have a server named Server1 that runs a full installation of Windows Server 2012 R2. 

You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this goal by using the minimum amount of Administrative effort. What should you do? 

A. Reinstall Windows Server 2012 R2 on the server. 

B. From Server Manager, uninstall the User Interfaces and Infrastructure feature. 

C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE 

D. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience. 

Answer:


Microsoft 70-410 Certification Sample Questions and Answers: https://www.braindumpsall.net/70-410-dumps/

P.S. New 70-410 dumps PDF: http://www.4easydumps.com/70-410-dumps-download.html