What tells you about mcp 70 410

Want to know Pass4sure 70 410 installing and configuring windows server 2012 r2 Exam practice test features? Want to lear more about Microsoft Installing and Configuring Windows Server 2012 certification experience? Study Guaranteed Microsoft 70 410 exam dumps answers to Down to date 70 410 exam questions questions at Pass4sure. Gat a success with an absolute guarantee to pass Microsoft 70 410 study guide pdf (Installing and Configuring Windows Server 2012) test on your first attempt.

Q91. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. 

The domain controllers are configured as shown in the following table. 

In the perimeter network, you install a new server named Server1 that runs Windows Server 2012 R2. Server1 is in a workgroup. 

You need to perform an offline domain join of Server1 to the contoso.com domain. 

What should you do first? 

A. Transfer the PDC emulator role to Dc1. 

B. Run the djoin.exe command. 

C. Run the dsadd.exe command. 

D. Transfer the infrastructure master role to DC1. 

Answer:

Explanation: 

A. Creates a new Active Directory computer. 

B. Use djoin for offline join in the perimeter network 

C. Adds specific types of objects to the directory. 

D. Add the local computer to a domain or workgroup. 


Q92. - (Topic 1) 

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. 

The domain contains a user named User1 and three global security groups named Group1, Group2 and, Group3. 

You need to add User1 to Group1, Group2, and Group3. 

Which cmdlet should you run? 

A. Add-AdPrincipalGroupMembership 

B. Install-AddsDomainController 

C. Install-WindowsFeature 

D. Install-AddsDomain 

E. Rename-AdObject 

F. Set-AdAccountControl 

G. Set-AdGroup 

H. Set-User 

Answer:

Explanation: 

The Add-ADPrincipalGroupMembershipcmdlet adds a user, group, service account, or computer as a new member to one or more Active Directory groups. 

References: 

http://technet.microsoft.com/en-us/library/ee617203.aspx http://technet.microsoft.com/en-us/library/hh974723.aspx 


Q93. - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. 

You create a new inbound rule by using Windows Firewall with Advanced Security. 

You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation (NAT) device on the network. 

Which setting in the rule should you configure? 

A. Interface types 

B. Authorized computers 

C. Remote IP address 

D. Edge traversal 

Answer:

Explanation: 

Edge traversal – This indicates whether edge traversal is enabled (Yes) or disabled (No). When edge traversal is enabled, the application, service, or port to which the rule applies is globally addressable and accessible from outside a network address translation (NAT) or edge device. 

Select one of the following options from the list: Block edge traversal (default) – Prevent applications from receiving unsolicited traffic from the Internet through a NAT edge device. Allow edge traversal – Allow applications to receive unsolicited traffic directly from the Internet through a NAT edge device. Defer to user – Let the user decide whether to allow unsolicited traffic from the Internet through a NAT edge device when an application requests it. Defer to application – Let each application determine whether to allow unsolicited traffic from the Internet through a NAT edge device. 

: http://technet.microsoft.com/en-us/library/cc731927.aspx 


Q94. - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. 

On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table. 

You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1. 

What should you do before you create the checkpoint? 

A. Run the Resize-VHD cmdlet. 

B. Convert Disk1.vhd to a dynamically expanding disk. 

C. Shut down VM1. 

D. Run the Convert-VHD cmdlet. 

Answer:

Explanation: 

Changing between a fixed and dynamic disk type does not alter the size of a SNAPSHOT much at all. However, since a snapshot is a record of a VMs state at the exact time that the snapshot was taken, shutting down the VM before taking the snapshot prevents the snapshot from having to contain all of the data in RAM (as there is no data in memory when a machine is powered down). 

The question states that the solution should minimize the amount of disk space used for the checkpoint of VM1. If the checkpoint is taken while VM1 is running, there will be two attritional files present at the checkpoint location; a .VSV with VM1 saved state files and a .BIN file which contains VM1’s memory contents. If, however, VM1 is shut down first, these files will not be created, thus saving disk space. In order to convert Disk1.vhd to a dynamically expanding disk, VM1 still have to be shut down. 


Q95. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and has the Hyper-V server role installed. HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled. 

You install the DHCP server role on a virtual machine named Server 1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope. 

You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1. 

You need to ensure that the virtual machines can use Server1 as a DHCP server. 

What should you do? 

A. Enable MAC address spoofing on Server1. 

B. Disable the DHCP guard on all of the virtual machines that are DHCP clients. 

C. Disable the DHCP guard on Server1. 

D. Enable single-root I/O virtualization (SR-IOV) on Server1. 

Answer:

Explanation: 

Private virtual networks are used where you want to allow communications between virtual machine to virtual machine on the same physical server in a block diagram, a private network is an internal network without a virtual NIC in the parent partition. A private network would commonly be used where you need complete isolation of virtual machines from external and parent partition traffic. DMZ workloads running on a leg of a trihomed firewall, or an isolated test domain are examples where this type of network may be useful. 


Q96. HOTSPOT - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 

You need to implement NIC teaming on Server1. 

Which two network connections should you include on the NIC team? (To answer, select the two appropriate network connections in the answer area.) 

Answer: 


Q97. HOTSPOT - (Topic 1) 

A printer named Printer1 is configured as shown in the exhibit. (Click the Exhibit button.) 

To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point. 

Answer: 


Q98. - (Topic 3) 

Your network contains an Active Directory forest that contains three domains. A group named Group1 is configured as a domain local distribution group in the forest root domain. You plan to grant Group1 read-only access to a shared folder named Share1. Share1 is located in a child domain. 

You need to ensure that the members of Group1 can access Share1. 

What should you do first? 

A. Convert Group1 to a global distribution group. 

B. Convert Group1 to a universal security group. 

C. Convert Group1 to a universal distribution group. 

D. Convert Group1 to a domain local security group 

Answer:


Q99. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. One of the domain controllers is named DC1. 

The network contains a member server named Server1 that runs Windows Server 2012 R2. 

You need to promote Server1 to a domain controller by using install from media (IFM). 

What should you do first? 

A. Create a system state backup of DC1. 

B. Create IFM media on DC1. 

C. Upgrade DC1 to Windows Server 2012 R2. 

D. Run the Active Directory Domain Services Configuration Wizard on Server1. 

E. Run the Active Directory Domain Services Installation Wizard on DC1. 

Answer:

Explanation: 

A. Backs up system state data to be restored 

C. Only valid option. You could install ADDS role on Server 1 and run ADDS configuration wizard and add DC to existing domain 

D. Need to add ADDS role first 

E. Wrong server Installation from media does not work across different operating system versions. In other words, you must use a Windows Server 2012 R2 domain controller to generate installation media to use for another Windows Server 2012 R2 domain controller installation. We can use the Install from media (IFM) option to install an Additional Domain Controller in an existing domain is the best option such as a branch office scenario where network is slow, unreliable and costly. IFM will minimize replication traffic during the installation because it uses restored backup files to populate the AD DS database. This will significantly reduce the amount of traffic copied over the WAN link. Things to remember: If you are deploying your first Domain Controller in the domain, you cannot use IFM. The OS will need to match the IFM media. (If you create a 2008 R2 IFM, promote a 2008 R2 DC) If you are creating a DC that will be a Global Catalog Server, create your IFM on a Global Catalog Server. 

If you are creating a DC that will be a DNS Server, create your IFM on a DNS Server. If you want to copy the SYSVOL, the DC on which you generate the installation media and the new DC must be at least running Windows Server 2008 with Service Pack 2 or Windows Server 2008 R2. Membership of the Domain Admins group is the minimum required to complete IFM. 


Q100. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1. 

On Server2, you install a network monitoring application named App1. 

You need to capture all of the inbound and outbound traffic to Server1 by using App1. 

Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.) 

A. Get-VM “Server2 | Set-VMNetworkAdapter -IovWeight 1 

B. Get-VM “Server1 | Set-VMNetworkAdapter -Allow/Teaming On 

C. Get-VM “Server1 | Set-VMNetworkAdapter -PortMirroring Source 

D. Get-VM “Server2 | Set-VMNetworkAdapter -PortMirroring Destination 

E. Get-VM “Server1 | Set-VMNetworkAdapter -IovWeight 0 

F. Get-VM “Server2 | Set-VMNetworkAdapter-AllowTeaming On 

Answer: C,D 


Microsoft 70-410 Certification Sample Questions and Answers: https://www.braindumpsall.net/70-410-dumps/

P.S. New 70-410 dumps PDF: http://www.4easydumps.com/70-410-dumps-download.html