NEW QUESTION 1
What are the options that can be configured under sevice-set (Select 3 Answers)?

• A. The SSID string can be configured via ssid xxxx
• B. can be bound to wmm-profile
• C. Can call wlan-ess interface and configure service-vlan
• D. You can configure the forwarding mode as direct-forward or tunnel-forward

Answer: ACD

NEW QUESTION 2
What is the coverage of the AP (Select 3 Answers).

• A. AP transmit power
• B. Antenna gain
• C. AP size
• D. Transmission loss

Answer: AB.D

NEW QUESTION 3
The following statement about SSID is wrong.

• A. Multiple different SSIDs can be released on one AP
• B. The same SSID can be released on multiple APs.
• C. There is no limit to the number of SSIDs that can be configured on an AP.
• D. The same SSID signal can be released on two sets of antennas of one A

Answer: C

NEW QUESTION 4
Among the following encryption methods, the best security is.

• A. Clear text encryption
• B. WEP encryption
• C. TKIP encryption
• D. CCMP encryption

Answer: D

NEW QUESTION 5
In the process of discovering the AC by the thin AP, the first step is to check whether there is a list of pre-configured static AC IP addresses.

• A. True
• B. False

Answer: A

NEW QUESTION 6
BSS is called Basic Service Set, and BSS can be divided into Independent BSS and Infrastructure BSS.

• A. True
• B. False

Answer: A

NEW QUESTION 7
Which configuration methods does the wireless controller support (Select 3 Answers)?

• A. telnet configuration
• B. console port configuration
• C. eSight configuration
• D. LLDP configuration

Answer: ABC

NEW QUESTION 8
The following statement is correct (Select 2 Answers)?

• A. The web authentication is triggered by the user's http packet before the IP address is successfully obtaine
• B. At this time, the user is forced to redirect to the portal server to perform the authentication process.
• C. When the user obtains the IP address successfully, the user triggers the HTTP packet of the use
• D. At this time, the user is forced to redirect to the portal server to perform the authentication process.
• E. WPA2 uses 802.1X authentication
• F. WPA only supports one encryption technology of TKIP

Answer: BC

NEW QUESTION 9
What are the reasons why APs cannot go online (Select 3 Answers)?

• A. The configuration of the DHCP address pool is incorrec
• B. The AP cannot obtain the address.
• C. The AP uses static discovery but the IP address of the AC is incorrec
• D. The version of
• E. AP is inconsistent with the version of AC.
• F. The controller adopts no-auth authentication mod

Answer: ABC

NEW QUESTION 10
The power of the indoor AP is generally mW.

• A. 100
• B. 500
• C. 800
• D. 50

Answer: A

NEW QUESTION 11
The AP and the antenna can be connected.

• A. Network cable
• B. CATV coaxial cable
• C. Power cable
• D. 50 ohm RF coaxial cable

Answer: D

NEW QUESTION 12
The 802.11 physical layer standard defines some common operations of the wireless network at the physical layer: operations such as QoS, security, and roaming.

• A. True
• B. False

Answer: B

NEW QUESTION 13
Authentication is not related to the authentication encryption used by the WLAN itself when it is used by the WLAN.

• A. True
• B. False

Answer: B

NEW QUESTION 14
What is the correct description of the thin AP below?

• A. Thin AP is also known as a wireless router.
• B. Thin AP is gradually replaced by fat AP due to lack of function.
• C. Thin AP cannot be configured separately and must be used with the wireless controller.
• D. Thin AP can implement 802.1X authentication, encryption and other function
• E. Others such as QoS and roaming functions are implemented on the wireless controller.

Answer: C

NEW QUESTION 15
What is the wireless client's active scanning to get the surrounding wireless network information by sending frames?

• A. Beacon frame
• B. Probe Request frame
• C. Authentication Request frame
• D. Association Request frame

Answer: B

NEW QUESTION 16
Which of the following are factors that need to be considered for AP capacity planning (Select 3 Answers)

• A. Equipment performance
• B. Number of concurrent users
• C. Bandwidth requirements
• D. Power supply type

Answer: ABD

NEW QUESTION 17
How many channels does China support in the 2.4 GHz band?

• A. 11
• B. 13
• C. 3
• D. 5

Answer: B

NEW QUESTION 18
AP transmit power 20dBm, antenna gain 4dBi, cable and device loss 1dB, terminal receive antenna gain 2dBi, spatial propagation loss 80dB, terminal receive level RSSI=.

• A. -57
• B. -56
• C. -55
• D. -54

Answer: B

NEW QUESTION 19
Which of the following devices are Huawei Wireless Dual Access AP (Access Point) (Select 2 Answers)?

• A. AP5010DN
• B. AP5010SN
• C. AP6010SN
• D. AP6010DN

Answer: AD

NEW QUESTION 20
If the AP's transmit power is 1mW, it is converted to dBm and then dBm.

• A. 20
• B. 1
• C. 10

Answer: C

NEW QUESTION 21
According to the following configuration example, the following statement is correct.
[AC] dhcp enable
[AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24 [AC-VLANif100] dhcp select interface [AC-VLANif100] quit

• A. The DHCP service is enabled by default in the global mode, so the dhcp enable can be configure
• B. The
• C. dhcp select interface command enables the DHCP client function on the interface of VLAN 100.
• D. If VLAN 100 is a user VLAN, the gateway is 10.1.100.1 and the mask is 255.255.255.0 after the user receives the address.
• E. If VLAN 100 is the management VLAN where the AP is located, the option 43 field in the DHCP message received by the AP should be 10.1.100.1.

Answer: C

NEW QUESTION 22
Which of the following options are part of the 802.11b/g protocol (Select 3 Answers)?

• A. Different throughput capabilities
• B. Different protocols use different technologies
• C. Different data rates supported
• D. Different working bands

Answer: ABC

NEW QUESTION 23
To configure a WLAN service, you need to add an AC to the U2000.

• A. True
• B. False

Answer: A

NEW QUESTION 24
If the AP wants to obtain the IP address of the AC through the DNS server, first obtain the IP address of its own IP address, DHCP server, and DNS.

• A. True
• B. False

Answer: A

NEW QUESTION 25
What parameters are used in 802.11 frames to reassemble frame fragments?

• A. Frame Control
• B. Duration
• C. Address bit
• D. Fragment number

Answer: D

NEW QUESTION 26
......