The Secret Of Cisco 300-615 Actual Test

Testking 300-615 Questions are updated and all 300-615 answers are verified by experts. Once you have completely prepared with our 300-615 exam prep kits you will be ready for the real 300-615 exam without a problem. We have Update Cisco 300-615 dumps study guide. PASSED 300-615 First attempt! Here What I Did.

Online 300-615 free questions and answers of New Version:

NEW QUESTION 1
300-615 dumps exhibit
Refer to the exhibit. HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?

  • A. Configure preempt on one of the switches in the HSRP group.
  • B. Configure the same HSRP priority between the two switches.
  • C. Configure the correct subnet mask on Nexus7K-1.
  • D. Configure HSRP version 2 on Nexus7K-2.

Answer: D

NEW QUESTION 2
Refer to the exhibit. Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?

  • A. Acknowledge the primary fabric interconnect.
  • B. Remove the service pack from the subordinate fabric interconnect.
  • C. Clear the startup version of the default infrastructure pack.
  • D. Upgrade the firmware of the infrastructure firmware by using the force option.

Answer: C

NEW QUESTION 3
300-615 dumps exhibit
Refer to the exhibit. When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?

  • A. Port 15 is configured as an Ethernet port.
  • B. Port 15 is configured for 4-Gb FC.
  • C. Port 15 is missing a license.
  • D. The polarity of the fiber cable is reversed.

Answer: B

NEW QUESTION 4
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?

  • A. Remove the port group manually.
  • B. Migrate all virtual machines in the EPG-1 to different hypervisors.
  • C. Remove the remaining EPGs from the VMM domain.
  • D. Migrate all virtual machines in the EPG-1 to different port groups.

Answer: C

NEW QUESTION 5
An engineer attempts to register Cisco UCS Manager to Cisco UCS Central, but the registration fails. The engineer can ping Cisco UCS Central from UCS Manager. Which two actions must the engineer attempt to resolve the problem? (Choose two.)

  • A. Synchronize the date and time to NTP for Cisco UCS Central and the Cisco UCS domains.
  • B. Apply the UCS Central license to UCS Central.
  • C. Place Cisco UCS Manager on the same subnet as Cisco UCS Central.
  • D. Allow port 443 between Cisco UCS Manager and Cisco UCS Central.
  • E. Allow port 9443 between Cisco UCS Manager and Cisco UCS Central.

Answer: AD

NEW QUESTION 6
Refer to the exhibit. A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?

  • A. event cli match ‘configure terminal’
  • B. event policy-default count 1 time 100
  • C. event syslog occurs 10
  • D. action 2.0 event-default

Answer: D

NEW QUESTION 7
300-615 dumps exhibit
Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?

  • A. The interface is working correctly and fully operational, but it is not in use.
  • B. The interface policy is misconfigured.
  • C. “out-of-service” is the default interface status in ACI.
  • D. “out-of-service” indicates that no service graph is in use for this interface.

Answer: B

NEW QUESTION 8
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?

  • A. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
  • B. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
  • C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
  • D. The same Fabric Name value should be used before after wiping all devices.

Answer: C

NEW QUESTION 9
300-615 dumps exhibit
Refer to the exhibit. The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?

  • A. Reconfigure the initiator and the target to be in the same zones.
  • B. Reactivate the zoneset.
  • C. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
  • D. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.

Answer: B

NEW QUESTION 10
DRAG DROP
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Select and Place:
300-615 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-615 dumps exhibit

NEW QUESTION 11
A fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)

  • A. Load an uncorrupt bootloader image.
  • B. Load an uncorrupt kickstart image.
  • C. Reconnect L1/L2 cables between the Fis.
  • D. Reformat the fabric interconnect.
  • E. Load the correct version of the boot image.

Answer: BE

NEW QUESTION 12
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)

  • A. Disable first-hop redundancy.
  • B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.
  • C. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.
  • D. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.
  • E. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.

Answer: AB

NEW QUESTION 13
300-615 dumps exhibit
Refer to the exhibit. A web browser displays a “not secure” warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?

  • A. Load third-party certificate to UCS Manager.
  • B. Use the correct TCP port for HTTPS.
  • C. Use a supported web browser.
  • D. Use a supported version of UCS Manager.

Answer: A

NEW QUESTION 14
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?

  • A. Modify the VLAN assignment to vNICs.
  • B. Change the PIN groups on the vHBAs.
  • C. Modify the FCoE VLAN.
  • D. Set the FCoE VLAN as the native VLAN on server uplinks.

Answer: A

NEW QUESTION 15
300-615 dumps exhibit
Refer to the exhibit. The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?

  • A. event statement
  • B. event-default action statement
  • C. policy-default action statement
  • D. IP address of the SNMP server

Answer: D

NEW QUESTION 16
DRAG DROP
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Select and Place:

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 17
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)

  • A. M-Series module
  • B. ESSENTIALS license
  • C. STORAGE-ENT license
  • D. FCoE license
  • E. F-Series module

Answer: DE

NEW QUESTION 18
300-615 dumps exhibit
Refer to the exhibit. An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?

  • A. Statically configure the target information in the Boot Policy.
  • B. Configure an MTU size of 9000 on the appliance port.
  • C. Configure a QoS policy on the vNIC.
  • D. Set a connection timeout value of 250 in the iSCSI Adapter Policy.

Answer: A

NEW QUESTION 19
An engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?

  • A. Enable ETS
  • B. Enable PFC.
  • C. Enable Cisco Discovery Protocol.
  • D. Enable LLDP.

Answer: D

NEW QUESTION 20
A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?

  • A. Configure the SAN boot target in the service profile.
  • B. Configure the SAN boot target to any configuration mode.
  • C. Use a predefined local disk configuration policy.
  • D. Remove the local disk configuration policy.

Answer: C

NEW QUESTION 21
300-615 dumps exhibit
Refer to the exhibit. vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)

  • A. Match vPC domain ID between the two devices.
  • B. Configure IP address on the interface.
  • C. Activate VLANs on the vPC.
  • D. Configure vPC peer link and vPC peer keepalive correctly.
  • E. Configure one of the switches as primary for the vPC.

Answer: AC

NEW QUESTION 22
300-615 dumps exhibit
Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?

  • A. Configure the HSRP timers to be the same.
  • B. Allow VLAN 100 between the switches.
  • C. Configure the IP address of N9K-B on the same subnet as N9K-A.
  • D. Configure preempt on only one of the switches.

Answer: B

NEW QUESTION 23
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)

  • A. Configure the NVE interfaces to be Up on both switches.
  • B. Set a different distributed gateway virtual MAC address.
  • C. Set a different secondary IP addresses on NVE source-interface.
  • D. Configure the same VNI to multicast group maping.
  • E. Set a different primary IP addresses on NVE source-interface.

Answer: AD

NEW QUESTION 24
......

100% Valid and Newest Version 300-615 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/300-615-dumps.html (New 0 Q&As)