how to use microsoft 70 413

Pass4sure offers free demo for 70 413 exam exam. "Designing and Implementing a Server Infrastructure", also known as microsoft 70 413 exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 413 exam exam, will help you answer those questions. The 70 413 pdf Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 413 pdf exams and revised by experts!

Q21. - (Topic 7) 

You have an IP Address Management (IPAM) server that runs Windows Server 2012 SP1. You need to integrate the IPAM server with System Center Virtual Machine Manager (SCVMM). 

Solution: You create a dedicated user account named IPAM_svc, and add it to the Local Administrators local group on the SO/MM server. 

Does this meet the goal? 

A. Yes 

B. No 

Answer:

Reference: How to integrate IPAM with SCVMM 2012 R2 


Q22. - (Topic 8) 

Your network contains an Active Directory domain named contoso.com. All servers run either Windows Server 2008 R2 or Windows Server 2012. 

Your company uses IP Address Management (IPAM) to manage multiple DHCP servers. 

A user named User1 is a member of the IPAM Users group and is a member of the local Administrators group on each DHCP server. 

When User1 edits a DHCP scope by using IPAM, the user receives the error message shown in the exhibit. (Click the Exhibit button.) 

You need to prevent User1 from receiving the error message when editing DHCP scopes by using IPAM. 

What should you do? 

A. Add User1 to the DHCP Administrators group on each DHCP server. 

B. Add User1 to the IPAM Administrators group. 

C. Run the Set-IpamServerConfig cmdlet. 

D. Run the Invoke-IpamGpoProvisioning cmdlet. 

Answer:

Explanation: 

IPAM Administrators: IPAM Administrators have the privileges to view all IPAM data and perform all IPAM tasks. 

Reference: Walkthrough: Demonstrate IPAM in Windows Server 2012 

http://technet.microsoft.com/en-us/library/hh831622.aspx 


Q23. - (Topic 8) 

Your network contains an Active Directory forest. The forest contains a single domain. The forest has five Active Directory sites. Each site is associated to two subnets. 

You add a site named Site6 that contains two domain controllers. Site6 is associated to one subnet. 

You need to verify whether replication to the domain controllers in Site6 completes successfully. 

Which two possible commands can you use to achieve the goal? Each correct answer presents a complete solution. 

A. Get-ADReplicationSubnet 

B. Get-ADReplicationUpToDatenessVectorTable 

C. repadmin /showattr 

D. Get-ADReplicationSite1ink 

E. repadmin /showrepl 

Answer: B,E 

Explanation: B: The Get-ADReplicationUpToDatenessVectorTable cmdlet displays the highest Update Sequence Number (USN) for the specified domain controller(s). This information shows how up-to-date a replica is with its replication partners. During replication, each object that is replicated has USN and if the object is modified, the USN is incremented. The value of the USN for a given object is local to each domain controller where it has replicated are number is different on each domain controller. 

E: The repadmin /showrepl command helps you understand the replication topology and replication failures. It reports status for each source domain controller from which the destination has an inbound connection object. The status report is categorized by directory partition. 


Q24. - (Topic 1) 

You implement a new virtualized print server that runs Windows Server 2012. 

You need to migrate the print queues. 

Which tool should you use? 

A. Windows Server Migration Tools 

B. Active Directory Migration Tool (ADMT) 

C. Print Management 

D. Computer Management 

Answer:

Explanation: 

* Scenario: Migrate the existing print queues to virtualized instances of Windows Server 2012. 

* To manage the migration process, use one of the following: . The Printer Migration Wizard, which you access through Print Management, a 

snap-in in 

. Microsoft Management Console (MMC). 

. The Printbrm.exe command-line tool. 

You can perform the migration locally or remotely, and from either a client computer or server. Important 

As a best practice, run the Printer Migration Wizard or Printbrm.exe from a computer running Windows Server 2012 

* Reference: Migrate Print and Document Services to Windows Server 2012 


Q25. - (Topic 8) 

You are the administrator for a large company. You plan to implement servers in the environment that do not use local hard drives. 

You need to recommend a supported storage solution. 

Which technology should you recommend? 

A. Clustered NAS 

B. Cloud storage 

C. USB flash drive 

D. iSCSISAN 

Answer:


Q26. - (Topic 8) 

You have a server named Server1 that runs Windows Server 2012. 

You have a 3-TB database that will be moved to Server1. 

Server1 has the following physical disks: 

. Three 2-TB SATA disks that are attached to a single IDE controller . One 1-TB SATA disk that is attached to a single IDE controller 

You need to recommend a solution to ensure that the database can be moved to Server1. The solution must ensure that the database is available if a single disk fails. 

What should you include in the recommendation? 

A. Add each disk to a separate storage pool. Create a mirrored virtual disk. 

B. Add two disks to a storage pool. Add the other disk to another storage pool. Create a mirrored virtual disk. 

C. Add all of the disks to a single storage pool, and then create two simple virtual disks. 

D. Add all of the disks to a single storage pool, and then create a parity virtual disk. 

Answer:

Explanation: 

Parity A parity virtual disk is similar to a hardware Redundant Array of Inexpensive Disks (RAID5). Data, along with parity information, is striped across multiple physical disks. Parity enables Storage Spaces to continue to service read and write requests even when a drive has failed. A minimum of three physical disks is required for a parity virtual disk. Note that a parity disk cannot be used in a failover cluster. 


Q27. - (Topic 8) 

Your network contains an Active Directory forest named contoso.com. 

You plan to add a new domain named child.contoso.com to the forest. 

On the DNS servers in child.contoso.com, you plan to create conditional forwarders that 

point to the DNS servers in contoso.com. 

You need to ensure that the DNS servers in contoso.com can resolve names for the 

servers in child.contoso.com. 

What should you create on the DNS servers in contoso.com? 

A. A zone delegation 

B. A conditional forwarder 

C. A root hint 

D. A trust point 

Answer:

Explanation: Understanding Zone Delegation 

Domain Name System (DNS) provides the option of dividing up the namespace into one or 

more zones, which can then be stored, distributed, and replicated to other DNS servers. 

When you are deciding whether to divide your DNS namespace to make additional zones, 

consider the following reasons to use additional zones: 

You want to delegate management of part of your DNS namespace to another location or 

department in your organization. 

You want to divide one large zone into smaller zones to distribute traffic loads among 

multiple servers, improve DNS name resolution performance, or create a more-fault-tolerant DNS environment. 

You want to extend the namespace by adding numerous subdomains at once, for example, 

to accommodate the opening of a new branch or site. 

Reference: Understanding Zone Delegation 


Q28. - (Topic 3) 

You need to recommend a migration strategy for the DHCP servers. The strategy must meet the technical requirements. 

Which Windows PowerShell cmdlet should you recommend running on the physical DHCP servers? 

A. Import-SmigServerSetting 

B. Export-SmigServerSetting 

C. Receive-SmigServerData 

D. Send-SmigServerData 

Answer:

Explanation: * Scenario: / Main office: One physical DHCP server that runs Windows Server 2008 R2 / each branch office: One physical DHCP server that runs Windows Server 2008 R2 / The IPAM server in the main office gathers data from the DNS servers and the DHCP servers in all of the offices. 

* Example: 

Command Prompt: C:\\PS> 

Export-SmigServerSetting -Feature "DHCP" -User All -Group -Path "c:\\temp\\store" -Verbose 

This sample command exports the Dynamic Host Configuration Protocol (DHCP) Server and all other Windows features that are required by DHCP Server. 


Q29. - (Topic 8) 

Your network contains an Active Directory domain named contoso.com. The domain 

contains an organizational unit (OU) named OU1. 

You have a Group Policy object (GPO) named GPO1 that is linked to contoso.com. GPO1 contains custom security settings. 

You need to design a Group Policy strategy to meet the following requirements: 

. The security settings in GPO1 must be applied to all client computers. 

. Only GPO1 and other GPOs that are linked to OU1 must be applied to the client computers in OU1. 

What should you include in the design? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. Enable the Block Inheritance option at the domain level. Enable the Enforced option on GPO1. 

B. Enable the Block Inheritance option on OU1. Link GPO1 to OU1. 

C. Enable the Block Inheritance option on OU1. Enable the Enforced option on all of the GPOs linked to OU1. 

D. Enable the Block Inheritance option on OU1. Enable the Enforced option on GPO1. 

Answer:

Explanation: * You can block inheritance for a domain or organizational unit. Blocking inheritance prevents Group Policy objects (GPOs) that are linked to higher sites, domains, or organizational units from being automatically inherited by the child-level. 

* GPO links that are enforced cannot be blocked from the parent container. 


Q30. - (Topic 8) 

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the DHCP Server server role installed. 

All of the client computers that are in a subnet named Subnet1 receive their IP address configurations from Server1. 

You plan to add another DHCP server named Server2 to Subnet1. 

You need to recommend changes to the DHCP infrastructure to ensure that the client computers continue to receive IP addressing information if a single DHCP server fails. 

What should you do? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. Create a Network Load Balancing (NLB) cluster. 

B. Configure Failover for the scope. 

C. Create a DHCP failover cluster. 

D. Create a split scope. 

Answer:

Explanation: 

One of the great features in Windows Server 2012 R2 is the DHCP failover for Microsoft DHCP scopes. Failover is where the environment suffers an outage of a service which triggers the failover of that service function to a secondary server or site. The assumption for most failover configurations is that the primary server is completely unavailable. 


Microsoft 70-413 Certification Sample Questions and Answers: https://www.braindumpsall.net/70-413-dumps/

P.S. New 70-413 dumps PDF: http://www.4easydumps.com/70-413-dumps-download.html