How Many Questions Of AZ-700 Study Guides

Your success in Microsoft AZ-700 is our sole target and we develop all our AZ-700 braindumps in a way that facilitates the attainment of this target. Not only is our AZ-700 study material the best you can find, it is also the most detailed and the most updated. AZ-700 Practice Exams for Microsoft AZ-700 are written to the highest standards of technical accuracy.

Microsoft AZ-700 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1

You have an Azure subscription.
You have the on-premises sites shown the following table.
AZ-700 dumps exhibit
You plan to deploy Azure Virtual WAN.
You are evaluating Virtual WAN Basic and Virtual WAN Standard.
Which type of Virtual WAN can you use for each site? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
AZ-700 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 2

You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2. You have the NAT gateway shown in the NATgateway1 exhibit.
AZ-700 dumps exhibit
You have the virtual machine shown in the VM1 exhibit.
AZ-700 dumps exhibit
Subnet1 is configured as shown in the Subnet1 exhibit.
AZ-700 dumps exhibit
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
Graphical user interface, text, application Description automatically generated
Box 1: No
VM1 is in Zone2 whereas the NAT Gateway is in Zone1. The VM would need to be in the same zone as the NAT Gateway to be able to use it. Therefore, VM1 cannot use the NAT gateway.
Box 2: Yes
NATgateway1 is configured in the settings for Subnet2. Box 3: No
The NAT gateway does not have a single public IP address, it has an IP prefix which means more than one IP address. The VMs the use the NAT Gateway can use different public IP addresses contained within the IP prefix.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-gateway-resource

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two Azure virtual networks named Vnet1 and Vnet2.
You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.
You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit. Vnet2 can use the remote gateway.
You discover that Client1 cannot communicate with Vnet2. You need to ensure that Client1 can communicate with Vnet2.
Solution: You download and reinstall the VPN client configuration. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
The VPN client must be downloaded again if any changes are made to VNet peering or the network topology. Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing

NEW QUESTION 4

You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-udr-overview

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 5

You have three on-premises sites. Each site has a third-party VPN device.
You have an Azure virtual WAN named VWAN1 that has a hub named Hub1. Hub1 connects two of the three on-premises sites by using a Site-to-Site VPN connection.
You need to connect the third site to the other two sites by using Hub1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-700 dumps exhibit


Solution:
Table Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-site-to-site-portal

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 6

You need to prepare Vnet1 for the deployment of an ExpressRoute gateway. The solution must meet the hybrid connectivity requirements and the business requirements.
Which three actions should you perform in sequence for Vnet1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-700 dumps exhibit


Solution:
AZ-700 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 7

Your company has an on-premises network and three Azure subscriptions named Subscription1, Subscription2, and Subscription3.
The departments at the company use the Azure subscriptions as shown in the following table.
AZ-700 dumps exhibit
All the resources in the subscriptions are in either the West US Azure region or the West US 2 Azure region. You plan to connect all the subscriptions to the on-premises network by using ExpressRoute.
What is the minimum number of ExpressRoute circuits required?

  • A. 1
  • B. 2
  • C. 3
  • D. 4
  • E. 5

Answer: A

NEW QUESTION 8

In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
AZ-700 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 9

You have an Azure virtual network named Vnet1.
You need to ensure that the virtual machines in Vnet1 can access only the Azure SQL resources in the East US Azure region. The virtual machines must be prevented from accessing any Azure Storage resources.
Which two outbound network security group (NSG) rules should you create? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. an allow rule that has the IP address range of Vnet1 as the source and destination of Sql.EastUS
  • B. a deny rule that has a source of VirtualNetwork and a destination of Sql
  • C. a deny rule that has a source of VirtualNetwork and a destination of 168.63.129.0/24
  • D. a deny rule that has the IP address range of Vnet1 as the source and destination of Storage

Answer: CD

NEW QUESTION 10

You plan to publish a website that will use an FQDN of www.contoso.com. The website will be hosted by using the Azure App Service apps shown in the following table.
AZ-700 dumps exhibit
You plan to use Azure Traffic Manager to manage the routing of traffic for www.contoso.com between AS1 and AS2.
You need to ensure that Traffic Manager routes traffic for www.contoso.com. Which DNS record should you create?

  • A. two A records that map wmv.contoso.com to 131 107 100 1 and 131 107 200 1
  • B. a CNAME record that maps www.contoso.com to TMprofile1.azurefd.net
  • C. a CNAME record that mapswww.contoso.comtoTMprofile1.trafficmanager.net
  • D. a TXT record that contains a string ofas1.contoso.com and as2.contoso.com in the details

Answer: C

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/traffic-manager/quickstart-create-traffic-manager-profile https://docs.microsoft.com/en-us/azure/app-service/configure-domain-traffic-manager

NEW QUESTION 11

Your company has an Azure virtual network named Vnet1 that uses an IP address space of 192.168.0.0/20. Vnet1 contains a subnet named Subnet1 that uses an IP address space of 192.168.0.0/24.
You create an IPv6 address range to Vnet1 by using a CIDR suffix of /48.
You need to enable the virtual machines on Subnet1 to communicate with each other by using IPv6 addresses assigned by the company. The solution must minimize the number of additional IPv4 addresses.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
:
Add IPv6 configuration to NIC. "Configure all of the VM NICs with an IPv6 address using Add-AzNetworkInterfaceIpConfig"
Source: https://docs.microsoft.com/en-us/azure/load-balancer/ipv6-add-to-existing-vnet-powershell

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 12

You have two Azure virtual networks named Vnet1 and Vnet2 in an Azure region that has three availability zones.
You deploy 12 virtual machines to each virtual network, deploying four virtual machines per zone. The virtual machines in Vnet1 host an app named App1. The virtual machines in Vnet2 host an app named App2.
You plan to use Azure Virtual Network NAT to implement outbound connectivity for App1 and App2. You need to identify the minimum number of subnets and Virtual Network NAT instances required to meet
the following requirements:
• A failure of two zones must NOT affect the availability of either App1 or App2.
• A failure of two zones must NOT affect the outbound connectivity of either Appl1or App2. What should you identify? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
AZ-700 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 13

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network named Vnet1
* A subnet named Subnet1 in Vnet1
* A virtual machine named VM1 that connects to Subnet1
* Three storage accounts named storage1, storage2, and storage3
You need to ensure that VM1 can access storage1. VM1 must be prevented from accessing any other storage accounts.
Solution: You create a network security group (NSG) and associate the NSG to Subnet1. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 14

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two Azure virtual networks named Vnet1 and Vnet2.
You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.
You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit. Vnet2 can use the remote gateway.
You discover that Client1 cannot communicate with Vnet2. You need to ensure that Client1 can communicate with Vnet2. Solution: You enable BGP on the gateway of Vnet1.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
The VPN client must be downloaded again if any changes are made to VNet peering or the network topology. Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing

NEW QUESTION 15

You are implementing the Virtual network requirements for Vnet6.
What is the minimum number of subnets and service endpoints you should create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
2, 4

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 16

You have an Azure environment shown in the following exhibit.
AZ-700 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-peering-gateway-transit?toc=/azure/virtual-ne https://docs.microsoft.com/en-ca/azure/virtual-network/ip-services/ipv6-overview#capabilities

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 17

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
AZ-700 dumps exhibit


Solution:
AZ-700 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 18

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled. You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error.
AZ-700 dumps exhibit
You need to ensure that the URL is accessible through the application gateway. Solution: You configure a custom cookie and an exclusion rule.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 19

You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN. Users will authenticate by using an on premises Active Directory domain. Which additional service should you deploy to support the VPN authentication?

  • A. a certification authority (CA)
  • B. a RADIUS server
  • C. an Azure key vault
  • D. Azure Active Directory (Azure AD) Application Proxy

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/point-to-site-about

NEW QUESTION 20

You have 10 Azure App Service instances. Each instance hosts the same web app. Each instance is in a different Azure region.
You need to configure Azure Traffic Manager to direct users to the instance that has the lowest latency. Which routing method should you use?

  • A. geographic
  • B. weighted
  • C. performance
  • D. priority

Answer: D

NEW QUESTION 21
......

Thanks for reading the newest AZ-700 exam dumps! We recommend you to try the PREMIUM Dumps-hub.com AZ-700 dumps in VCE and PDF here: https://www.dumps-hub.com/AZ-700-dumps.html (105 Q&As Dumps)