Jun 2016 updated: 70-488 self paced training kit download

Exambible older Microsoft teachers and also experts may approve in which Exambible Microsoft 70-488 examination questions and answers are usually almost proper. The particular complete fee regarding Developing Microsoft SharePoint Server 2013 Core Solutions has been almost 95 %. Above al, we might prove that the 70-488 research materials created valuable guide for Microsoft applicants. Our 70-488 pdf worth the examinees sparing with out to examine. You are able to guess your own boot youll have a optimistic result through the Exambible Developing Microsoft SharePoint Server 2013 Core Solutions exercise tests.

2016 Jun 70-488 training

Q52. - (Topic 5) 

A company uses SharePoint team sites for their projects, which last for a month. 

At the end of every month the project site must be archived and moved to a backup web application. The company plans to create a timer job. 

You need to write custom code that will move the site from the production web application to the archived web application. 

Which method of the timer job should you override? 

A. RunNow 

B. Execute 

C. Update 

D. Provision 

Answer: B 

Explanation: 

Execute Executes the job definition on the local machine and is intended to be used only by the timer service. 

Note: After you create the constructors, you must override the Execute method of the SPJobDefinition class and replace the code in that method with the code that your job requires. 

Incorrect: 

A: RunNow 

Schedules the job for immediate execution. 

C: SPJobDefinition.Update method 

Causes the job definition to save its state and propagate changes to all machines in the 

farm. 

D: Provision 

Makes the changes to the local server that are needed before the object can be used. 

Reference: Creating Timer Jobs in SharePoint 2010 that Target Specific Services 


Q53. - (Topic 5) 

You are developing a site-provisioning engine for a company. You create a site request page that employees use to specify the site template, title, and URL for a site. The site request page stores site requests in a list named Site Requests that is at the root of the site collection. You configure an approval workflow for the list. 

Site creation must start at 3:00 AM each day. You must create sites in batches of no more than 10 sites. You must not create sites until they are approved. 

You need to create the site-provisioning engine. 

Which two actions would you perform? Each correct answer presents part of the solution. 

A. Create an ItemUpdated event receiver for the Site Requests list. Initiate site provisioning if the value of the ModerationInformation property is set to the value SPModerationStatusType.Approved. 

B. Create a new timer job that derives from SPWorkItemJobDefinition. Schedule the timer job to run at 3:00 AM. 

C. Create a new timer job that derives from SPJobDefinition. Schedule the timer job to run at 3:00 AM. 

D. Create an ItemAdded event receiver for the Site Requests list. Initiate site provisioning if the value of the ModerationInformation property is set to the value SPModerationStatusType.Approved. 

E. Create an ItemUpdated event receiver for the Site Requests list. Create a new work item if the value of the ModerationInformnation property is set to the value SPModerationStatusType.Approved. 

Answer: A,B 

Explanation: A: Site provivison only initiated if it is approved. 

B: A Work Item Job can be scheduled to run operations in SharePoint. A Work Item Timer Job is essentially a queue where you add list items that need to be processed. When the Work Item Timer Job runs, it pulls items from the queue and process the item. 

Incorrect: 

Not C: An SP Job would not be able to process items from a queue. 

Reference: All About Sharepoint Work Item Timer Jobs 

http://www.ericgregorich.com/blog/2014/1/25/using-work-item-timer-jobs-in-sharepoint 


Q54. HOTSPOT - (Topic 4) 

You need to configure the publishing site to support the browser requirements. 

From Site Settings, which option should you select first? (To answer, select the appropriate option in the answer area.) 


Answer: 



Q55. DRAG DROP - (Topic 5) 

You have a large list that contains more than 5,000 list items. 

You need to iterate through the list by using the Content Iterator to avoid getting an 

exception. 

You have the following code: 


Which code segments should you include in Target 1, Target 2, Target 3, Target 4, Target 5 and Target 6 to complete the code? (To answer, drag the appropriate code segments to the correct location or locations in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: 



Q56. - (Topic 3) 

A server in the SharePoint farm experiences high memory usage. Task Scheduler on the server runs a Windows PowerShell script to perform backups of Wholesale sites. 

You need to resolve any memory leak issues in the Windows PowerShell script. 

What should you do? (Each correct answer presents a complete solution. Choose all that apply.) 

A. Insert the code segment at line EW04: 

Start-SPAssignment -Global 

B. Insert the code segment at line EW17: 

$site.Close() 

C. Insert the code segment at line EW17: 

Stop-SPAssignment -SemiGlobal 

D. Insert the code segment at line EW17: 

Stop-SPAssignment –Global 

Answer: A,C 

Explanation: * Start-SPAssignment –Global initiates a new assignment store. 

* Stop-SPAssignment .Disposes of objects in the provided assignment collection. The Stop-SPAssignmentcmdlet disposes of objects in the provided assignment collection. Use the Global parameter to dispose of all objects in the global assignment collector and to stop the global store from collecting additional objects. Provide a SemiGlobal assignment collector to dispose of all contained objects. 

From scenario: 

* Performance Optimization and Memory Usage 

SPSite objects must be removed from memory immediately after the objects go out of scope. 


Q57. - (Topic 5) 

Adventure Works uses a web design firm to design the user interface for an upcoming toy sales website, www.toys.adventureworks.com. The website is built by using a SharePoint publishing template. 

Adventure Works must implement the newly designed user interface for the site. The design firm provides a set of HTML, CSS, and JavaScript files. 

You need to create and publish a SharePoint master page by using the supplied files. 

What should you do? (Each correct answer presents part of the solution. Choose all that apply.) 

A. From the Master Pages section in SharePoint Designer, select Create New Master Page and then replace the master page contents with the contents of the HTML file. 

B. From SharePoint Designer, open the master page gallery. Right-click the new master page and then select Set as Default Master. 

C. From the Design Manager, map a network drive to the /_layouts/masterpage/ folder. Then, in Windows Explorer, copy all the UI elements provided by the design team to the network share. 

D. From the Edit Master Page section in Design Manager, select Convert an HTML File to a SharePoint Master Page to generate a master page from the HTML file provided by designer firm. 

E. Publish the master page. Then, from Site Settings, choose the Look and Feel section, and then select Master Page. Choose the master page and select OK. 

F. Preview the master page and select Snippets to get HTML segments of the SharePoint top navigation, quick launch, and body. Then, edit the master page by using Microsoft Notepad and replace the HTML with the new segments. 

Answer: B,D,E 

Explanation: Note: * 

D, Not A: To convert the HTML file into a .master file 

Browse to your publishing site. 

In the upper-right corner of the page, choose Settings, and then choose Design 

Manager. 

In Design Manager, in the left navigation pane, choose Edit Master Pages. 

Choose Convert an HTML file to a SharePoint master page. 

In the Select an Asset dialog box, browse to and select the HTML file that you 

want to convert.etc 

E (not F): Let's say you created a new Master Page/Theme/CSS for your SharePoint site and want to apply them across your site (including all your subsites as well). This can be easily done from Site Settings -> Look & Feel -> Master Page. 

B: Usually you'll set the master page as both default and custom master page, 

Reference: How to: Convert an HTML file into a master page in SharePoint 2013; How to: Create a minimal master page in SharePoint 2013 


Q58. - (Topic 5) 

Adventure Works uses a SharePoint publishing site to host their public-facing website at http://www.adventureworks.com. The website gives external users the ability to register and sign in to the site to buy Adventure Works products. 

You notice that publicly registered users see the SharePoint ribbon. 

You need to ensure that the SharePoint ribbon is available only to content authors and administrators. 

What should you do? 

A. Open the current site master page in SharePoint Designer, place the SharePoint:SPSecurityTrimmedControl control around the div tag with the s4-ribbonrow ID. Set the PermissionsString to ManageSubWeb. 

B. Open the current site master page in SharePoint Designer, find a div tag with the s4-ribbonrow ID, and then remove all of the contents of the div. 

C. Open the current site master page in SharePoint Designer and then place the SharePoint:SPSecurityTrimmedControl control around the div tag with the s4-ribbonrow ID. Set the PermissionsString to AddAndCustomizePages. 

D. In the SharePoint project, add an Empty Element and then use the <HideCustomAction> tag to hide the ribbon. 

Answer: C 

Explanation: If you designed a custom master page for your SharePoint 2010 and the 

ribbon is in your way, SharePoint has a built-in control that lets you hide it from anonymous 

users in few easy steps. Open and check-out your master page, find where your ribbon 

control starts or look for <WebPartPages:SPWebPartManager id=”m” runat=”Server”/>. 

Place this control below <Sharepoint:SPSecurityTrimmedControl runat=”server” 

Permissions=”AddAndCustomizePages”>. Find where your ribbon control ends or look for 

<div id=s4-workspace> and place the closing control above it 

</SharePoint:SPSecurityTrimmedControl>. Save, check-in the master page and publish it 

to see the changes. From now on, only logged in users with the right permissions will be 

able to see the ribbon on the top. 

Incorrect: 

Not A: Permission should be set to AddAndCustomizePages not ManageSubWeb. 

Reference: SharePoint, Hide the Ribbon from Anonymous Users 


Q59. DRAG DROP - (Topic 5) 

Northwind Traders uses Microsoft Office 365 to share customer information between internal and external users. Northwind Traders plans to allow external sales managers to manage customers on the Office 365 site by providing a custom SharePoint autohosted app. The custom web application will be hosted on Microsoft Azure. 

You develop the autohosted app that allows all users on Office 365 to be able to read and write data in a SharePoint list from an ASP.NET web application. 

You need to ensure that the custom web application will authenticate itself, get access tokens from the Microsoft Azure Access Control Service (ACS), and read to and write from a SharePoint list. 

You have the following code: 


Which code segments should you include in Target 1, Target 2 and Target 3 to complete the code? (To answer, drag the appropriate code segments to the correct targets in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: 



certshared.com

Up to the minute 70-488 sharepoint certification:

Q60. - (Topic 3) 

You must upgrade the existing version of the application to a newer version. 

Which two actions should you perform? (Each correct answer presents part of the solution. 

Choose all that apply.) 

A. Add the following code segment at line CX11: 

<VersionRangeBeginVersion="1.0" EndVersion="2.e"> 

B. Add the following code segment at CX13: 

<VersionRange BeginVersion-"1.0.0.0"EndVersion-"2.0.0.0"> 

C. Use Microsoft Visual Studio to change the feature version to 1.5.0.0. 

D. Use Microsoft Visual Studio to change the feature version to 1.5. 

E. Add the following code segment at line CX11: 

<VersionRange BeginVersion-"1.0.0.0"EndVersion-"2.0.0.0"> 

Answer: B,C 

Explanation: B: VersionRange Element specifies a range of previous versions of the 

Feature to which the upgrade actions should apply. 

/ BeginVersion: Specifies the earliest version number to which the child upgrade elements 

will apply, in the format n.n.n.n, where each n can be up to four digits. 

/ EndVersion: Specifies the earliest version number to which the upgrade will not apply. 

The format is n.n.n.n, where each n can be up to four digits. 

C: Feature versions in Microsoft SharePoint Foundation are used to trigger Feature upgrade. If you update your Feature version but do not specify any Feature upgrade logic in the Feature.xml file, when the Feature upgrade runs, it simply updates the version number of your Feature. However, if you specify Feature upgrade logic, the upgrade code is executed and the version number is automatically updated as well. 

Scenario: New Features The first version (1.0.0.0) of the feature must support the addition of newer functionality when the feature is upgraded to version 1.5.0.0. 

Reference: VersionRange Element (Feature); Best Practices for Using Feature Versions 


Q61. HOTSPOT - (Topic 4) 

You create a document reporting Web Part for Marketing auditors. 

You need to configure throttling for the Web Part. You insert the following code in line MA08 

spQuery.QuerythrottleMode = Target 1 

Which code segment should you include in Target1 to complete the code? (To answer, select the appropriate option from the drop-down list in the answer area.) 


Answer: 



Q62. HOTSPOT - (Topic 5) 

A company develops a SharePoint app that employees use to submit expense reports. Employees can approve their own expenses for purchases less than $100. For expenses greater than $100, the app will authenticate both itself and the user before approval is requested. 

The expense reporting app includes the following code. Line numbers are included for reference only. 


For each of the following statements, select Yes if the statement is true. Otherwise, select No. 


Answer: 



Q63. - (Topic 2) 

You receive an error when you deploy the app. 

You need to resolve the error. 

What should you do? 

A. Deploy the app to https://contoso.sharepoint.com/tasks. 

B. Deploy the app to https://contoso-my.sharepoint.com. 

C. Enable side-loading of apps in the Visual Studio project properties. 

D. Enable side-loading of apps in the app manifest. 

Answer: D 

Explanation: 

* Scenario: Pending Issues 

When you deploy the app from Visual Studio 2012, you receive the error: "Error occurred in deployment step 'Install app for SharePoint': Sideloading of apps is not enabled on this site." 


Q64. DRAG DROP - (Topic 2) 

You need add to code at line IL22 to implement the task list design. 

How should you complete the relevant code? (To answer, drag the appropriate code segments to the correct location or locations in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: 



Q65. - (Topic 4) 

You need to create a design package for the publishing sites. 

What should you do? 

A. Use SharePoint Designer to create master pages and a design package. 

B. Use Visual Studio 2012 to create master pages and generate a design package. 

C. Use display templates. 

D. Use Design Manager. 

Answer: D 

Explanation: InSharePoint 2013, Design Manager can help web developers and designers build and export the visual design of a SharePoint site collection as a package. This package can easily be distributed to customers, or other designated groups, for installation on their site collections. This new feature reduces the complexity of transporting designs, and makes it easier for customers to outsource the visual design of their sites. 

Scenario: During the creation and application of the design package to the publishing site, SharePoint 2013 out-of-the-box capabilities must be used as much as possible to ensure simple design changes and to simplify the upgrade procedures. 

Reference: SharePoint 2013 Design Manager design packages 


Q66. - (Topic 4) 

You need to add the search box to the publishing site. 

What should you do? 

A. Generate a code snippet and paste it into the HTML file. 

B. Edit the default.master master page and then add the search box control. 

C. Add the Search Web Part to the Welcome page. 

D. Edit the page layout. 

Answer: A 

Explanation: 

Scenario: A search box must be available on all publishing sites. 

The publishing site design is delivered as a set of HTML files (litwarepublishing.html), CSS 

(Litwarepublishing.css), and image files from the marketing company. 


Q67. HOTSPOT - (Topic 3) 

You need to create the required site columns. 

How should you complete the relevant code? (To answer, select the appropriate code segment from each drop-down list in the answer area.) 



Answer: 



Q68. DRAG DROP - (Topic 4) 

You need to apply the Design Package to all of the required sites. 

You have the following code: 


Which code segments should you include in Target 1 and Target 2 to complete the code? (To answer, drag the appropriate code segments to the correct targets in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: 




see more http://www.certshared.com/exam/70-488/

Microsoft 70-488 Certification Sample Questions and Answers: http://www.braindumpsall.net/70-488-dumps/

P.S. New 70-488 dumps PDF: http://www.4easydumps.com/70-488-dumps-download.html