NEW QUESTION 1
What setting is used for the object space reservation in the VXRAIL-SYSTEM-STORAGE-PROFILE?

• A. 50% Reservation
• B. Thick Provisioning
• C. 75% Reservation
• D. Thin Provisioning

Answer: D

NEW QUESTION 2
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?

• A. 4
• B. 5
• C. 16
• D. 32

Answer: C

NEW QUESTION 3
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

• A. FQDN for vCenter ServerHost name for VxRail Manager
• B. Host name for both vCenter Server and for VxRail Manager
• C. FQDN for both vCenter Server and for VxRail Manager
• D. Host name for vCenter Server FQDN for VxRail Manager

Answer: A

NEW QUESTION 4
What is the correct CL! command to collect only the VxRail Manager logs?

• A. generateFullBundle.py -c
• B. vm-supportsh -c
• C. generateLogBundle py -v
• D. vc-support sh -v

Answer: A

NEW QUESTION 5
What must be used when deploying VxRail with a customer-supplied VDS?

• A. Deployment Wizard using the configuration file method
• B. Deployment Wizard using the step-by-step method
• C. VxRail API with configuration file
• D. VxRail PowerShell SysBringUp Module

Answer: B

NEW QUESTION 6
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

• A. show network-policy profile
• B. show interface status
• C. show port-channel summary
• D. show interface

Answer: A

NEW QUESTION 7
What is a consideration when adding nodes to a VxRail G Series chassis?

• A. G560 and G410 nodes are permitted in the same chassis
• B. In a full G Series chassis, all nodes must have 10GbE ports
• C. Hybrid and All-Flash nodes are permitted, if in different chassis
• D. All nodes in a G Series chassis must be identical

Answer: D

NEW QUESTION 8
An implementation engineer is tasked with setting up RecoverPoint for VMs on a new 4-node E Series VxRail duster How many VMs are licensed to be protected on the cluster?

• A. 5
• B. 10
• C. 20
• D. 25

Answer: C

NEW QUESTION 9
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?

• A. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
• B. Upgrade the VxRail version from 4.7.xxx to 7.0.000
• C. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
• D. Upgrade the internal vCenter Server to version 7.0

Answer: B

NEW QUESTION 10
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?

• A. RASR Factory Image Upgrade
• B. Factory Reset
• C. VxRail Node Imaging Management
• D. Compute node expansion

Answer: D

NEW QUESTION 11
A VxRail D560 cluster was delivered six months ago and now needs to be prepared for installation with the target code. What is the correct method to complete the task?

• A. Boot into RASR ISO and perform a RASR Reset
• B. Boot into RASR USB and perform a RASR Reset
• C. Boot into SD card and perform a Factory Reset
• D. Boot into RASR ISO and perform a Factory Reset

Answer: A

NEW QUESTION 12
Match each VxRail API request with the information to be retrieved.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13
Use the VxRail simulator to explore the system. What is the presented configuration?
Note: It fs necessary to close (x) the simulator window before you can select a response to this question.

• A. Internal vCenter and external DNS
• B. Internal vCenter and Internal DNS
• C. External vCenter and external DNS
• D. External vCenter and internal DNS

Answer: A

NEW QUESTION 14
A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.
What is an expected benefit of programmatically gathering VxRail information?

• A. Perform node shutdowns and specific operations
• B. Perform pre-checks for vSAN health
• C. Automate iDRAC firmware management and status
• D. Obtain status of all running operations on a cluster

Answer: B

NEW QUESTION 15
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

• A. Loudmouth
• B. Election
• C. Marvin
• D. Mystic

Answer: C

NEW QUESTION 17
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?

• A. SSH to the VxRail Manager VM with the mystic user SU to rootGo to the /opt/VxRail/config directorySCP the initial-config json file to a local location
• B. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data SentUse the Download option
• C. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directoryGET the config-initial json file
• D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > SystemUse the Product Documentation option

Answer: B

NEW QUESTION 18
Which VxRail model can only be installed with static rack rails?

• A. D Series
• B. P Series
• C. S Series
• D. G Series

Answer: A

NEW QUESTION 19
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-6 (Erasure Coding)?

• A. 4
• B. 5
• C. 6
• D. 7

Answer: C

NEW QUESTION 20
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?

• A. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet
• B. Redundant power zones exist with adequate power cables
• C. Power distribution supports only the power rating of a single node
• D. Service laptop is on the same IP network as the iDRACs

Answer: B

NEW QUESTION 21
......