Tips for exam 70 680

It is impossible to pass Microsoft exam 70 680 exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Microsoft mcts 70 680 practice questions. You will get a surprising result by our Abreast of the times TS:Windows 7,Configuring practice guides.

Q221. - (Topic 3) 

You have two computers named Computer1 and Computer2 that run Windows 7. 

You use Remote Desktop to connect from Computer1 to Computer2. 

You need to prevent the desktop background of Computer2 from being displayed when you use Remote Desktop to connect to Computer2. 

What should you do on Computer1? 

A. From the Personalization options, change the theme. 

B. From the System properties, modify the Remote settings. 

C. From the Remote Desktop Connection options, modify the Performance setting. 

D. From the Remote Desktop Connection options, modify the Display configuration settings. 



Configuring the Desktop ExperienceYou can configure the connection speed and fine-tune the desktop environment for optimal performance by using the settings located on the Experience tab of the Remote Desktop Connection tool. Most of these settings relate to the graphical nature of the desktop. Because the processing for graphics happens on the server and must be transmitted to the desktop over the network connection, you can increase performance by allowing only the minimal settings that are necessary for your users. When you choose a connection speed, the check boxes are automatically selected to indicate the recommended settings for the richest visual experience possible at that speed.ExperienceConfigure the connection speed and adjust the desktop environment for optimal performance.Desktop background Allows user to choose a custom background or wallpaper for their desktop. Because these can be very graphicintensive, disable this setting unless it is necessary for your users. 

Q222. - (Topic 1) 

Which of the following can be used to increase the physical memory on your Windows 7 PC and increase the speed? 

A. PhysiRAM 

B. Aero Glass 

C. DirectAccess 

D. ReadyBoost 


Q223. - (Topic 3) 

You have a computer named Computer1 that runs Windows 7 and Windows Internet Explorer 8. 

A user reports that Computer1 has a number of Internet Explorer configuration issues that cause instability when browsing the Internet. 

You need to configure Internet Explorer to use all default settings. 

What should you do from Internet Options? 

A. From the Advanced tab, click Reset. 

B. From the Programs tab, click Set programs. 

C. From the Advanced tab, click Restore advanced settings. 

D. From the Security tab, click Reset all zones to default level. 



Reset Internet Explorer settings By resetting Internet Explorer settings, you return Internet Explorer to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems that might be caused by settings that were changed after installation. When you delete personal settings, some webpages that rely on previously stored cookies, form data, passwords, or previously installed browser add-ons might not work correctly. Resetting Internet Explorer to its default settings does not delete your favorites, feeds, Web Slices, and a few other personalized settings. See the table below for a complete list of all settings and information about whether they are reset or maintained. Resetting Internet Explorer's settings is not reversible. After a reset, all previous settings are lost and cannot be recovered. Rather than resetting everything, you might want to reset specific settings or delete your webpage history. For more information, see the links at the bottom of this topic. 

To reset Internet Explorer settings 

1. Close any Internet Explorer or Windows Explorer windows that are currently open. 

2. Click to open Internet Explorer. 

3. Click the Tools button, and then click Internet Options. 

4. Click the Advanced tab, and then click Reset. 

5. Select the Delete personal settings check box if you would like to remove browsing history, search providers, Accelerators, home pages, and InPrivate Filtering data. 

6. In the Reset Internet Explorer Settings dialog box, click Reset. 

7. When Internet Explorer finishes restoring the settings, click Close, and then click OK. 

8. Close Internet Explorer. 

Your changes will take effect the next time you open Internet Explorer. 

Q224. HOTSPOT - (Topic 4) 

You support windows 7 client computers used by Marketing department employees. 

The computers have dual-core CPUs for generating rich media advertisements. 

The Marketing department employees are reporting CPU performance Issues while rendering the rich media advertisements. 

You need to configure the wmplayer.exe to only use a single CPU core. 

What should you do? (To answer, select the appropriate option or options in the answer area.) 


Q225. - (Topic 1) 

You work in an international company which is named Wiikigo. Before entering this company, you have two years of experience in the IT field, as well as experience implementing and administering any Windows client operating system in a networked environment. You are professional in installing, upgrading and migrating to Windows 7, deploying Windows 7, and configuring Hardware and Applications and son on. You have a computer that runs Windows 7. 

You run Runas and specify the /savecred parameter to start an application. 

The stored password needs to be deleted. 

What action should you perform? 

A. The Windows credentials should be modified from Credential Manager. 

B. The Authorization Manager options should be modified from Authorization Manager. 

C. Del should be run and the /p parameter should be specified. 

D. Runas should be run and the /noprofile parameter should be specified. 


Q226. - (Topic 3) 

You have two computers named Computer1 and Computer2 that run Windows 7. Computer1 has two local user accounts named User1 and User2. On Computer1, you run Scanstate.exe /all \\\\server1\\data\\computer1. On Computer2, you run Loadstate.exe /lac:Pa$$w0rd \\\\server1\\data\\computer1. 

You need to ensure that User1 and User2 can log on to Computer2. 

What should you do on Computer2? 

A. Enable all user accounts 

B. Modify the default password policy 

C. Modify the Allow log on locally user right 

D. Add User1 and User2 to the local Administrators group 



LoadState is run on the destination computer. You should install all applications that were on the source computer on the destination before you run LoadState. You must run Loadstate. exe on computers running Windows Vista and Windows 7 from an administrative command prompt. To load profile data from an encrypted store named Mystore that is stored on a share named Migration on a file server named Fileserver and which is encrypted with the encryption key Mykey, use this command: loadstate \\\\fileserver\\migration\\mystore /i:migapp.xml /i:miguser.xml /decrypt /key:"mykey" 

(local account create) /lac:[Password] Specifies that if a user account is a local (non-domain) account, and it does not exist on the destination computer, USMT will create the account on the destination computer but it will be disabled. To enable the account, you must also use the /lae option. If the /lac option is not specified, any local user accounts that do not already exist on the destination computer will not be migrated. Password is the password for the newly created account. An empty password is used by default. 

Q227. HOTSPOT - (Topic 4) 

A company is upgrading its client computers from Windows XP to Windows 7. You add an application to the Windows 7 base image. 

The menu on the title bar of the application is not displayed properly, although other graphical elements are displayed correctly. 

You need to ensure that the application's menu is displayed correctly on client computers that run Windows 7. 

Which option should you choose to achieve this goal? (To answer, select the appropriate check box in the dialog box.) 


Q228. - (Topic 4) 

Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BrachCache features installed. 

All sales user in the office must download a daily updated 5-GB file that is stored on a file server located in a remote office. 

You configure the client computers to run BranchCache in Distributed Host mode. You discover that all users still access the file directly from the file server. 

You need to reduce the utilization of a WAN link between the offices because of downloading the file to the client computers. 

What should you do? 

A. Run the Netsh branchcache set service mode=HOSTEDSERVER client authentication=NONE command 

B. Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702, and inbound and outbound traffic for local TCP port 80. 

C. Create a Group Policy that sets Hash Publication for BranchCache as disabled. 

D. Run the netsh branchcache set service mode=DISTRIBUTED command. 

E. Create a Group Policy object and configure the Set percentage of disk space used for client computer cache option. 

F. Check permisions. 

G. Run the netsh branchcache set service mode=HOSTEDCLIENT command. 

H. Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy. 

I. Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and outbound traffic for local TCP port 8443. 



Original wording: You configure the client computers to run BranchCache in 'Distributed Host Mode'. Changed to 'Distributed Cache mode". 

Q229. - (Topic 2) 

You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go. 

You need to ensure that you can copy files from the computer to the USB drive. The solution must retain the existing files on the USB drive. 

What should you do? 

A. From a computer that runs Windows 7, change the file system of the USB drive. 

B. From a computer that runs Windows 7, disable BitLocker To Go for the USB drive. 

C. Log on to Windows XP as member of the Administrators group. 

D. Log on to Windows XP by using a user account that has an Encrypting File System (EFS) certificate. 



BitLocker To Go does not require that the computer have a TPM chip or that Group Policy be configured to allow some other form of authentication such as a startup key. If you configure appropriate policies, devices protected by BitLocker To Go can be used in read-only mode with computers running Windows XP and Windows Vista. 

Q230. HOTSPOT - (Topic 4) 

You are running windows 7 on a portable computer. A custom power plan named "On The Move" is optimized for battery life. 

The computer enters sleep mode when the portable computer is closed. 

You need to change a setting so that when you close the portable computer, nothing happens. 

Which setting should you change? (To answer, select the appropriate setting in the work area.) 


Microsoft 70-680 Certification Sample Questions and Answers:

P.S. New 70-680 dumps PDF: