Network-Appliance NS0-513 Questions 2021

Act now and download your Network-Appliance NS0-513 test today! Do not waste time for the worthless Network-Appliance NS0-513 tutorials. Download Leading Network-Appliance NetApp Certified Implementation Engineer—Data Protection exam with real questions and answers and begin to learn Network-Appliance NS0-513 with a classic professional.

NEW QUESTION 1
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use?

  • A. Transition Advisor

  • B. Visualization

  • C. Upgrade Advisor

  • D. Event Viewer

Answer: B

NEW QUESTION 2
Beginning with On Command Workflow Automation 3.0, which feature allows you to download and manage your WFA workflow packs from the NetApp resources.

  • A. Workflow Automation External Data Sources

  • B. Workflow Automation Database

  • C. Storage Automation Store

  • D. Workflow Automation Community

Answer: C

NEW QUESTION 3
You want to conserve disk space in your SnapVault destinations. You enable storage efficiency on each of the secondary volumes. Which two statements are true in this scenario?
(Choose two.) Response:

  • A. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.

  • B. Storage efficiency can be enabled on the secondary volume, but a manual schedule will need to be assigned.

  • C. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.

  • D. SnapVault implicitly uses storage efficiency.

Answer: AC

NEW QUESTION 4
You want to find an automated way to handle space utilization in volumes. You have limited space available in your aggregate. Which solution would solve this scenario?

  • A. Enable aggregate compression.

  • B. Enable volume autosize.

  • C. Enable volume level QoS.

  • D. Enable Snapshot autodelete.

Answer: D

NEW QUESTION 5
On a Windows host, you want to make a consistent database backup of a physical SQL server where the database is on iSCSI-connected LUNs on a clustered Data ONTAP system.
In addition to SnapDrive for Windows, which three NetApp software products should be installed to satisfy this requirement?
(Choose three.)

  • A. Microsoft iSCSI Software Initiator

  • B. On Command Workflow Automation

  • C. On Command Unified Manager

  • D. iSCSI Host Utilities

  • E. Snap Manager for SQL

Answer: ADE

NEW QUESTION 6
The primary and secondary clusters are fully configured. You want to set up an inter-cluster SnapMirror relationship. Which two actions are prerequisite to accomplishing this task?
(Choose two.)

  • A. The SVMs must be peered.

  • B. The primary and secondary clusters must be peered.

  • C. The Snapshot schedule must be configured.

  • D. NDMP must be enabled.

Answer: AC

NEW QUESTION 7
You have created a new CIFS share but it is inaccessible. After verifying the export policy, network connectivity, junction path, and permissions are all correct, you realize there is root volume loadsharing mirror in place.
What should you do next to make the share accessible? Response:

  • A. Update load-sharing mirror.

  • B. Update the root volume policy.

  • C. Re-create the CIFS share.

  • D. Modify the CIFS share permissions.

Answer: C

NEW QUESTION 8
You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume. In this scenario, what is transferred?
Response:

  • A. serial number

  • B. UUID

  • C. selected Snapshot copies

  • D. LUN mapping status

Answer: C

NEW QUESTION 9
In a clustered Data ONTAP environment, the customer is using SnapVault to back up data from a primary to a secondary cluster.
Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6. OnCommand Workflow Automation takes care of the secondary provisioning. The customer wants to update the SnapMirror Policy with a custom Snapshot copy label.
What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?

  • A. Add the SnapMirror label in the efficiency policy of the secondary system.

  • B. Re-initialize the SnapMirror relationship and transfer a new baseline.

  • C. Add the SnapMirror label in the SnapMirror policy of the secondary system.

  • D. Re-initialize the SnapMirror relationship without transferring a new baseline.

Answer: D

NEW QUESTION 10
Click the Exhibit button.
NS0-513 dumps exhibit
Refer to the Exhibit. clusterA, clusterB, and clusterC are in a mirror-mirror cascade relationship. clusterB is offline and not recoverable. You want to continue to protect cluster

  • A. In this scenario, which statement is correct?Response:

  • B. Resume the relationship between clusterA and clusterC, creating a new baseline.

  • C. clusterA will continue to be protected “as-is”.

  • D. Synchronize the relationship between clusterA and clusterC, avoiding a new baseline.

  • E. Create a SnapVault relationship between clusterB and clusterC.

Answer: C

NEW QUESTION 11
Your customer has issued the metrocluster heal command. Which two statements are true regarding this command?
(Choose two.)

  • A. The customer has replaced failed disks in one of the cluster nodes.

  • B. The customer has to run the command twice.

  • C. The customer has one node in the site down and wants to heal the cluster.

  • D. The customer is preparing for a disaster recovery switchback.

Answer: AD

NEW QUESTION 12
You do not want to impact your ongoing SnapMirror relationship between your primary and secondary site. Which step must be taken prior to creating a FlexClone at the disaster recovery site?

  • A. Cascade the SnapMirror destination volume to another SnapMirror destination.

  • B. Create a Snapshot copy of the SnapMirror destination volume.

  • C. Cascade the SnapMirror destination volume to another SnapVault destination.

  • D. Create a Snapshot copy of the SnapMirror source volume and wait for it to transfer.

Answer: D

NEW QUESTION 13
You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment. Which two statements are correct about enabling this feature?
(Choose two.)

  • A. The data is compressed only while it traverses the network.

  • B. The data transfer between the clusters must use the NDMP protocol.

  • C. You may only enable SnapMirror network compression on one HA pair in a cluster, and traffic 1-1 is limited to routing through those nodes.

  • D. The compression engine creates multiple transfer threads corresponding to the number of CPUs on the source storage system.

Answer: AD

NEW QUESTION 14
What are two NetApp data protection solutions? (Choose two.)

  • A. RecoverPoint

  • B. SnapMirror

  • C. TimeFinder

  • D. SnapVault

Answer: BD

NEW QUESTION 15
You are in a SnapProtect v11 solution environment creating a new subclient with NAS dat

  • A. Besides the subclient name, what other information is mandatory? (Choose three.)

  • B. the Snap Engine

  • C. the backup content path

  • D. the storage policy

  • E. the backup schedule

  • F. the retention policy

Answer: ACD

NEW QUESTION 16
Click the Exhibit button.
cluster2::>snapmirror show –instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show
–instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfully occurred?

  • A. 55 minutes

  • B. 55 seconds

  • C. 5 minutes

  • D. 5 seconds

Answer: B

NEW QUESTION 17
You must back up and replicate a Microsoft SQL server using SnapProtect in your clustered Data ONTAP environment. Which three components must be correctly installed and configured?
(Choose three.)

  • A. SnapDrive for Windows

  • B. On Command Workflow Automation

  • C. On Command Unified Manager 6.0

  • D. SnapProtect v10

  • E. SnapProtectiDataAgent

Answer: BCE

NEW QUESTION 18
A customer wants to convert some SnapMirror relationships to SnapVault relationships. How would this be accomplished without creating a new baseline?
Response:

  • A. Break and delete the relationship followed by SnapMirror resync.

  • B. Break the relationship followed by SnapMirror delete.

  • C. Break and delete the relationship followed by SnapMirror resync with relationship type XDP.

  • D. Break the relationship followed by SnapMirror modify.

Answer: D

NEW QUESTION 19
Management wants the ability to transfer more data over a low bandwidth network connection. Which action would satisfy the request?

  • A. Enable version flexible replication with a SnapMirror policy.

  • B. Enable network compression with a SnapMirror policy.

  • C. Disable throttle with a SnapMirror policy.

  • D. Modify the SnapMirror schedules.

Answer: B

NEW QUESTION 20
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1. Which two actions must be performed for the SnapMirror relationships?
(Choose two.)

  • A. Break existing SnapMirror relationships.

  • B. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.

  • C. After the upgrade, resynchronize, and resume SnapMirror relationships.

  • D. Delete and re-create SnapMirror relationships.

Answer: AC

NEW QUESTION 21
Your customer wants to implement a mirroring solution between two NetApp controllers. Which solution would you recommend to the customer?
Response:

  • A. Snapshot copies

  • B. SnapRestore

  • C. SnapMirror

  • D. Snapcreator

Answer: C

NEW QUESTION 22
In which two scenarios would a SnapMirror policy be applied? (Choose two.)
Response:

  • A. a log file

  • B. a storage virtual machine

  • C. a data protection mirror relationship

  • D. a SnapVault relationship

Answer: CD

NEW QUESTION 23
You are copying your data and replicating it off site. What is the called?

  • A. a backup

  • B. a demonstration

  • C. a version

  • D. a Snapshot

Answer: A

NEW QUESTION 24
You and other administrators are in the habit of creating FlexClone LUNs and then not deleting them when they are no longer needed. What should you do to help manage space utilization?

  • A. Use the flexclone split command.

  • B. Use the volume snapshot autodelete modify command.

  • C. Configure FlexClone LUNs to automatically be marked for deletion.

  • D. Configure FlexClone LUNs to automatically delete when they are one minute older than 30 days.

Answer: B

NEW QUESTION 25
You want to provide your team with a SnapProtect report that shows how many backups succeeded, were delayed, and failed over the last 30 days. You also want detailed information about the jobs, agents, and clients.
Which CommCell report provides the necessary information?

  • A. Backup Job Summary

  • B. Activity

  • C. Health

  • D. SLA

Answer: A

NEW QUESTION 26
......

Recommend!! Get the Full NS0-513 dumps in VCE and PDF From Dumpscollection, Welcome to Download: https://www.passcertsure.com/{productsort}-test/ (New 93 Q&As Version)