NEW QUESTION 1
During the initial installation of a SPARC T4-2 server, you notice the SP NET MGT port is not available. What is one possibility?

• A. The SPARC T4-2 does not use the SP NET MGT port.
• B. It must be connected to a Gigabit network.
• C. The network does not use DHCP.
• D. The Oracle ILOM is down.

Answer: C

NEW QUESTION 2
How is I/O access configured for logical domains with no physical I/O access?

• A. Configured with virtual I/O devices that communicate with the I/O domain, which is not configured as a service domain
• B. Configured with virtual I/O devices that communicate with a service domain
• C. Configured with virtual I/O devices that communicate with the root domain
• D. Configured with virtual I/O devices that communicate with the control domain

Answer: B

Explanation:

Reference: http://docs.oracle.com/cd/E23120_01/html/821-2854/ldomsmanager.html(see virtual input/output, second para, first sentence)

NEW QUESTION 3
In the ILOM if you redirect HTTP connections to HTTPS, but disable HTTPS, what will be the result?

• A. You will only be able to access the ILOM web interface via HTTPS, since HTTPS cannot be disabled.
• B. You will be able to access the ROM web interface via HTTP or HTTPS.
• C. You will only be able to accessthe ILOM web Interface via HTTP.
• D. You will not be able to access the ILOM web interface.

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E19201-01/820-6411- 12/configcomm_web.html(enable http or https web access, see the note)

NEW QUESTION 4
During an installation of a SPARC T4-2 server running Oracle Solaris to, you noticed several missing packages and drivers. What caused this?

• A. You installed an Oracle Solaris metacluster other than SUNWCX all (Entire distribution plus OEM system support).
• B. You are using the Enterprise installation Standards DVD rather than the recommended patch cluster from Oracle support.
• C. You are using an Enterprise Installation Standards DVD that is two months old.
• D. You installed Oracle Solaris 11 rather than Oracle Solaris 10.

Answer: A

NEW QUESTION 5
Power-on self-test (POST) detected a faulty core on a SPARC T4-2 server. The server supports an important internal application for the customer. What is the state of the application and why?

• A. The application is unavailable until the processor with the faulty core has been replaced.
• B. The application is available with limited computing resources since POST disabled the processor with the faulty core.
• C. The application is available since POST disabled the faulty core.
• D. The application is unavailable until the processor with the faulty core has been disabled by the system administrator.

Answer: C

NEW QUESTION 6
Below is a list of boot environments available on a SPARCT4 server running Oracle Solaris 11. Which boot environment is currentlybooted?

• A. S11amp
• B. Solaris
• C. Solaris – 151a
• D. Solaris – 174

Answer: D

NEW QUESTION 7
Activating Auto Service Request (ASR) Assets .

• A. Is done on the Asset only
• B. Is done on both the Asset and the ASR Manager system
• C. Is done on the ASR Manager system only
• D. Is done on My Oracle Support only

Answer: D

Explanation:

Reference:http://www.oracle.com/technetwork/systems/asr/overview/index.html(second para)

NEW QUESTION 8
How many XAUI (10 GbE Attachment Unit Interfaces) ports are provided per SPARC T4 processor?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 9
On a SPARC T4 server running Oracle Solaris 11, you execute the following:
% beaddm create alt_krit What is the result?

• A. Creates a snapshot of the boot environment "alt_krit"
• B. Makes "alt_krit" the default boot environment
• C. Renames the default boot environment to "alt_krit"
• D. Creates a new boot environment named "alt_krit"

Answer: D

Explanation:

Reference:https://blogs.oracle.com/jsavit/entry/running_solaris_11_as_a

NEW QUESTION 10
According to the Enterprise Installation Standards (EIS) on electrical grounding, what is the benefit of additional grounding points?

• A. Protect systems by helping to avoid leakage current
• B. Allows racks to support either AC or DC
• C. Allows a rack to support more than two dedicated circuit feeds for higher redundancy
• D. Allows a rack to support more than one UPS system for higher redundancy

Answer: A

NEW QUESTION 11
During installation, what happens if both power supplies are not cabled at the same time on a SPARC T4-2 server?

• A. Nothing
• B. OpenBoot PROM is disabled
• C. The service processor will not power on
• D. The Oracle ILOM will signal a fault

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E23075_01/html/E23076/z40004b81409406.html(see the second note on the page)

NEW QUESTION 12
Which command lists dynamically reconfigurable hardware resources and shows their operational status?

• A. dmesg
• B. ldm ls
• C. fmadm –al
• D. cfgadm –al

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E22985_01/html/E22986/z40019011297337.html(See step 2)

NEW QUESTION 13
You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue?

• A. You need to add SSH keys to the system before creating additional user accounts.
• B. You do not have the user management role enabled.
• C. You do not have the host control role enabled.
• D. You have exceeded the maximum number of 5 user accounts.

Answer: B

NEW QUESTION 14
What package should be installed if you wish to harden the control domain on a SPARC T4 server running Oracle Solaris 10 and Oracle VM Server for SPARC 2.1?

• A. SUNWldm
• B. SUNWdmp2v
• C. SUNWsst
• D. SUNWjass

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_ovm_sparc_mgmt.ht
m(15.6.2 - see the first note under this heading)

NEW QUESTION 15
According to the Enterprise Installation Standards (EIS) for SPARC T4 servers running Oracle Solaris 10, what steps are required in order to configure the server to use Auto Service Request (ASR)?

• A. 1. Enable ILOM telemetry2. Activate the ASR Asset
• B. 1. Enable SunMC telemetry2. Enable FMA telemetry3. Activate the ASR Asset
• C. 1. Enable SunMC telemetry2. Activate the ASR Asset
• D. 1. Enable ILOM telemetry2. Enable FMA telemetry3. Activate the ASR Asset

Answer: D

NEW QUESTION 16
When setting up Oracle VM Server for SPARC on a SPARC 14 server, you did not remove unneeded PCIe devices from control (primary) domain. What is the impact?

• A. PCIe devices from the control domain can no longer be used in I/O domain.
• B. Removing PCIe devices from the control domain for use in I/O domains requires a delayed reconfiguration and a reboot of the control domain.
• C. You can no longer migrate guest domains to another physical system by means of the domain migration Feature.
• D. There is no impact, as PCIe devices can be dynamically reassigned from the control domain to an I/O domain.

Answer: A

NEW QUESTION 17
You lost your Oracle ILOM settings after a service processor firmware update. Why?

• A. You did not enable the Preserve Configuration option.
• B. You did not back up the Oracle ILOM configuration.
• C. Oracle ILOM settings must be re-established after every firmware update.
• D. You used the Oracle ILOM web interface rather than the CLI to perform the update.

Answer: A

NEW QUESTION 18
When sizing the /var partition on a UFS file system, you have estimated the /var/sadm area to have 20 GB. Why?

• A. It is enough space to hold several complete crash dumps.
• B. It is rough space to hold package and patch information.
• C. It is enough space to hold logs and spools
• D. It is identical to the space allocated for the root slice, which is 20 GB on this particular system.

Answer: D

NEW QUESTION 19
What role should you assign to a user account that limits users to viewing the state of all ILOM configuration properties, or to change their own passwords and session time-out properties?

• A. Read only (0)
• B. Reset and host control (r)
• C. Services (s)
• D. User management (u)

Answer: A

Explanation:

Reference: http://www.fujitsu.com/downloads/SPARCE/manuals/sparc-t5e/ilom3.0-concept- en-01.pdf(page 6)

NEW QUESTION 20
When preparing to update the firmware, which two statements are true?

• A. If performed via the ILOM interface, the firmware file should reside on the system from which the browser is launched.
• B. If performed via the ILOM web interface, a TFTP server is required.
• C. If performed via the ILOM CLI, a TFTP server is required.
• D. Firmware updates can only be performed via the ILOM CLI.

Answer: B

NEW QUESTION 21
Based on the Enterprise Installation Standards (EIS), why should Oracle Explorer Data Collector be run with the “-i” switch after initial system power-on and setup are complete?

• A. To remove confidential customer IP addresses from the Explorer output
• B. To provide a baseline of the initial system configuration
• C. To collect local Intelligent Platform management Interface (IPMI) data
• D. To collect remote Oracle ILOM snapshot data

Answer: C

NEW QUESTION 22
You are trying to reach the OpenBoot prompt (ok) from Oracle Solaris on a SPARC T4-1 system running Oracle VM Server for SPARC. The OpenBoot firmware is not available. Why is the OpenBoot prompt not available?

• A. It has been removed from memory.
• B. It was not installed on the system.
• C. The service processor property “auto-boot” is disabled.
• D. An incorrect version of OpenBoot firmware is installed.

Answer: D

NEW QUESTION 23
......