NEW QUESTION 1
A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?

• A. Device Management > Traffic Groups
• B. Device Management > Devices
• C. Local Traffic > Virtual Servers
• D. Device Management > Overview

Answer: C

NEW QUESTION 2
Refer to the exhibit


The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?

• A. Set Port Lockdown of Set IP to Allow All
• B. Change Auto Last Hop to enabled
• C. Assign a physical interface to the new VLAN
• D. Create a Floating Set IP Address

Answer: C

NEW QUESTION 3
The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS. Where can the administrator obtain F5 documentation on upgrade requirements?

• A. AskF5
• B. DevCentral
• C. Bug Tracker
• D. iHealth

Answer: A

NEW QUESTION 4
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?

• A. The BIG-IP would drop the request since the traffic didn’t arrive destined to the NAT address.
• B. The source address would not change, but the destination address would be changed to the NAT address.
• C. The source address would be changed to the NAT address and destination address would be left unchanged.
• D. The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.

Answer: C

NEW QUESTION 5
Which two statements are true concerning the default communication between a redundant pair of BIG-IP systems? (Choose two.)

• A. Synchronization occurs via a TCP connection using ports 683 and 684.
• B. Connection mirroring data is shared via a TCP connection using port 1028.
• C. Persistence mirroring data is shared via a TCP connection using port 1028.
• D. Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.

Answer: BC

NEW QUESTION 6
Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content. What is the likely cause of the issue?

• A. The pool associated with the virtual server does not have priority group activation enabled.
• B. The virtual address does not have ARP enabled.
• C. The virtual address does not have route advertising enabled.
• D. The pool associated with the virtual server is falling its health check.

Answer: B

NEW QUESTION 7
Refer to the exhibit.

How many nodes are represented on the network map shown?

• A. Four
• B. Three
• C. One
• D. Two

Answer: B

NEW QUESTION 8
How is persistence configured?

• A. Persistence is an option within each pool's definition.
• B. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
• C. Persistence is a global setting; once enabled, loadbalancing choices are superceded by the persistence method that is specified.
• D. Persistence is an option for each pool membe
• E. When a pool is defined, each member's definition includes the option for persistence.

Answer: B

NEW QUESTION 9
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

• A. 200.200.1.1
• B. 150.150.10.11
• C. Floating self IP address on VLAN where the packet leaves the system
• D. Floating self IP address on VLAN where the packet arrives on the system

Answer: B

NEW QUESTION 10
Where is the loadbalancing mode specified?

• A. within the pool definition
• B. within the node definition
• C. within the virtual server definition
• D. within the pool member definition

Answer: A

NEW QUESTION 11
Which two statements describe differences between the active and standby systems? (Choose two.)

• A. Monitors are performed only by the active system.
• B. Failover triggers only cause changes on the active system.
• C. Virtual server addresses are hosted only by the active system.
• D. Configuration changes can only be made on the active system.
• E. Floating selfIP addresses are hosted only by the active system.

Answer: CE

NEW QUESTION 12
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?

• A. All of the pool member nodes are responding to the ICMP monitor as expected.
• B. Less than 50% of the pool member nodes responded to the ICMP echo request.
• C. All of the members of the pool have had their content updated recently and their responses no longer match the monitor.
• D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monito
• E. The other respond as expected.

Answer: D

NEW QUESTION 13
Which statement is true concerning a functional iRule?

• A. iRules use a proprietary syntax language.
• B. iRules must contain at least one event declaration.
• C. iRules must contain at least one conditional statement.
• D. iRules must contain at least one pool assignment statement.

Answer: B

NEW QUESTION 14
If a client's browser does not accept cookies, what occurs when the client connects to a virtual server using cookie persistence?

• A. The connection request is not processed.
• B. The connection request is sent to a pology server.
• C. The connection request is loadbalanced to an available pool member.
• D. The connection request is refused and the client is sent a "server not available" message.

Answer: C

NEW QUESTION 15
During a high-demand traffic event, the BIG-IP Administrator needs to limit the number of new connections per second allowed to a Virtual Server.
What should the administrator apply to accomplish this task?

• A. An HTTP Compression profile to the Virtual Server
• B. A connection rate limit to the Virtual Server
• C. A connection limit to the Virtual Server
• D. A OneConnect profile to the Virtual Server

Answer: B

NEW QUESTION 16
A BIG-IP Administrator is configuring a pool with members who have differing capabilities. Connections to pool members must be load balanced appropriately.
Which load balancing method should the BIG-IP Administrator use?

• A. Least Sessions
• B. Least Connections (member)
• C. Fastest (node)
• D. Weighted Least Connections (member)

Answer: D

NEW QUESTION 17
......