NEW QUESTION 1
Use the exhibits below to answer the question.



What two issues could be causing the Cisco Jabber failure shown in the exhibit? (Choose two)

• A. Incorrect username and password
• B. IM & Presence server is down
• C. User is not associated with the device
• D. IP or DNS name resolution issue
• E. CSF Device is not registered.
• F. IP Phone DN not associated with the user

Answer: BD

Explanation: The error message shown in Jabber is “Cannot communicate with the server” which points us to a connectivity issue with IP/DNS or the server is down. All other answer choices would result in a login failure, not communication error.

NEW QUESTION 2
An engineer must configure QoS for a VoIP network. Which option is the best QoS model for this task?

• A. IntServ
• B. DiffServ
• C. MPLS
• D. FIFO

Answer: B

NEW QUESTION 3
With GETVPN, if a key server is configured to use multicast as the rekey transport mechanism, then under which of these conditions will the key server retransmit the rekey messages?

• A. It never retransmit the rekey messages
• B. it only retransmit the rekey message when it does not receive the rekey acknowledgment from at leastone group member
• C. it only retransmit the rekey message when it does not receive the rekey acknowledgment from all group member
• D. it only retransmit the rekey message when DPD to the group members fails
• E. it always retransmit the rekey message

Answer: E

NEW QUESTION 4
An engineer is ensuring that each SIP-based element within a network has a component to route call activities to. Which virtual Cisco UCS server component is effective in reducing the number of call routing combinations while also simplifying SIP network design and troubleshooting?

• A. PBX
• B. Cisco Unified SIP Proxy
• C. VG Gateway
• D. SRST

Answer: B

NEW QUESTION 5
Which call processing agent is based on Cisco IOS software and works with ISR platforms?

• A. Cisco Unified Presence Server
• B. Cisco Unity Connection
• C. Cisco Unified Communications Manager Express
• D. Cisco Unified Communications Manager
• E. Cisco UnifiedContact Center Express

Answer: C

NEW QUESTION 6
What is the admin profile used for supervisor to modify or configure the recorded messages of customer
employees?

• A. annunciator admin
• B. recordings admin
• C. remote admin

Answer: B

NEW QUESTION 7
Two users have IP phones running SCCP phone loads. Which purpose does the SCCP protocol serve during the call?

• A. digitizing, sampling, and transmitting one user's analog voice to the Cisco Unified Communications Manager
• B. subscriber digitizing, sampling, and transmitting one user's analog voice to the other user's IP phone
• C. passing call setup and teardown messages between the IP phone and the Cisco Unified Communications Manager
• D. subscriber passing call setup and teardown messages between the two phones

Answer: C

NEW QUESTION 8
Cisco Unified Communications Manager clustering creates scalability in a network Which administrative action increases performance in a Cisco Unified Communications Manager cluster?

• A. enabling DSP process in the Cisco Unified Communications Manager GUI
• B. using only one endpoint to create redundancy
• C. providing multiple points for remote administration
• D. segregating processes to other machines

Answer: D

NEW QUESTION 9
Which navigation pane should be selected to view the CDR statistics?

• A. Cisco Unified Serviceability
• B. Cisco Unified CM Administration
• C. Cisco Unified Reporting
• D. Cisco Unified OS Administration

Answer: A

NEW QUESTION 10
For capacity planning purposes, a network administrator must provide a report to management that displays the number of phones registered per server. Where can the administrator obtain this information?

• A. Navigate to Cisco Unified Serviceability > Tools > Serviceability Reports Archive.
• B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports.
• C. Navigate to Cisco Unified CM Administration > Tools > System Reports.
• D. Navigate to Cisco Unified Reporting > Tools > System Reports.

Answer: A

NEW QUESTION 11
A network administrator wants a new employee to download the RTMT tool. Which menu option supports this function?

• A. Bulk Administration > Job Scheduler > Plugins
• B. Application > Plugins
• C. Call routing > Plugins
• D. Server > Region > Plugins

Answer: B

Explanation: https://supportforums.cisco.com/t5/collaboration-voice-and-video/using-rtmt-to-monitor-cisco-unity-connection

NEW QUESTION 12
Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)

• A. TFTP services
• B. DHCP services
• C. Voice VLAN
• D. Routing protocol
• E. TCP/IP
• F. PortFast

Answer: ABC

NEW QUESTION 13
Which three network elements are crucial when deploying VoIP devices? (Choose three.)

• A. Round-trip time
• B. QoS markings
• C. Bandwidth
• D. Ethernet
• E. Fibre
• F. Token ring

Answer: ABC

NEW QUESTION 14
Where do you add user voicemails in Unity?

• A. In users
• B. In Administration
• C. In Serviceability
• D. In Voicemail

Answer: A

NEW QUESTION 15
Client A in X site uses an IP phone to call client B in Y site. Engineers have selected SCCP as the default VoIP signaling protocol. Which network path will the call signaling take when client A calls client B?

• A. IP phone X > CUCM subscriber > IP phone Y using TCP port 1000
• B. IP phone X > CUCM subscriber > IP phone Y using TCP port 2000
• C. IP phone X > CUCM subscriber > IP phone Y using UDP port 1000
• D. IP phone X > IP phone Y using TCP port 2000
• E. IP phone X > IP phone Y using TCP port 1000

Answer: B

NEW QUESTION 16
A new user has successfully registered Cisco Jabber. Which option verifies that the Jabber client is connected to all appropriate back-end systems?

• A. Show Connection Status
• B. Report A Problem
• C. Advanced Settings
• D. About Jabber
• E. Reset Jabber

Answer: A