NEW QUESTION 1

A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?

• A. CPU and Memory capacity will be set to 25%.
• B. CPU and Memory capacity will be set to 50%.
• C. CPU and Memory capacity will be set to 20%.
• D. CPU and Memory capacity will be set to 30%.

Answer: C

Explanation:
Select the Percentage of Cluster Resources Reserved admission control policy. This policy offers the most flexibility in terms of host and virtual machine sizing. When configuring this policy, choose a percentage for CPU and memory that reflects the number of host failures you want to support. For example, if you want vSphere HA to set aside resources for two host failures and have ten hosts of equal capacity in the cluster, then specify 20%

NEW QUESTION 2

Which iSCSI initiator type can be used with any network interface card?

• A. Software iSCSI initiator
• B. Software FCoE adapter
• C. Hardware Independent iSCSI initiator
• D. Hardware Dependent iSCSI initiator

Answer: A

Explanation:
A software iSCSI adapter is a VMware code built into the VMkernel. It allows your host to connect to the
iSCSI storage device through standard network adapters. The software iSCSI adapter handles iSCSI processing while communicating with the network adapter. With the software iSCSI adapter, you can use iSCSI technology without purchasing specialized hardware.

NEW QUESTION 3

When checking the distribution of virtual machines within a Fully Automated DRS cluster, an administrator notices an uneven spread across the hosts.
Which advanced option within DRS would attempt to evenly balance VMs across the hosts?

• A. Disable DPM.
• B. Set DRS Migration Threshold to Aggressive.
• C. Enable VM Distribution.
• D. Migrate virtual machines to a Distributed Switch.

Answer: C

NEW QUESTION 4

The storage vendor recommends adjusting the Fibre Channel HBA queue depth to resolve a performance problem. Which esxcli namespace can a vSphere Administratoruse to adjust the queue depth?

• A. esxcli storage core device
• B. esxclisystem module parameters
• C. esxcli storage core adapter
• D. esxcli system module set

Answer: A

NEW QUESTION 5

vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)

• A. virtual NIC saturation of a virtual machine
• B. RAM
• C. storage latency
• D. CPU
• E. physical NIC saturation of an ESXi host

Answer: BDE

NEW QUESTION 6

Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?

• A. esxcli network
• B. vicfg-vmknic
• C. vmkping
• D. net-stats

Answer: C

NEW QUESTION 7

Option available to enable Encrypted vMotion. (Choose two.)

• A. Enable
• B. Opportunistic
• C. Required
• D. Default

Answer: BC

NEW QUESTION 8

Which two encryption keys does the host use when encrypting virtual machine files? (Choose two.)

• A. Public Key Infrastructure Encryption Key (PKI)
• B. Master Encryption Key (MEK)
• C. Data Encryption Key (DEK)
• D. Key Encryption Key (KEK)

Answer: CD

NEW QUESTION 9

What are three considerations when booting ESXihost from SAN using software FCoE? (Choose three.)

• A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
• B. Boot LUN cannot be shared with other hosts even on shared storage.
• C. Multipathing is not supported at pre-boot.
• D. Software FCoE boot configuration cannot be changed from within ESXi

Answer: BCD

Explanation:
https://kb.vmware.com/s/article/2032363

NEW QUESTION 10

Which two clients could an Administrator use to add a new identity source to the vCenter Single Sign-On domain? (Choose two.)

• A. vSphere Client
• B. Platform Services Controller Web Interface
• C. vSphere Appliance Management Interface
• D. vSphere Web Client
• E. VMware Host Client

Answer: BC

NEW QUESTION 11

When moving a virtual machine’s virtual disks from Datastore Cluster A to Datastore Cluster B, which two options should be considered? (Choose two.)

• A. Any Inter-VM or Intra-VM Anti-Affinity rules that existed for the virtual disks in Datastore Cluster A will not be carried over into the new Datastore Cluster.
• B. The virtual machine’s virtual disks will be placed by default onto the same datastore within Datastore Cluster B.
• C. If the virtual machine’s virtual disks have anti-affinity rules in Datastore Cluster A, they must be deleted before the virtual disks can be moved into Datastore Cluster B.
• D. The virtual machine needs to be powered off before moving its virtual disks from Datastore Cluster A to Datastore Cluster B.
• E. Any Inter-VM or Intra-VM Anti-Affinity rules that existed for the virtual disks in Datastore Cluster A will stay with the virtual disks once they have moved to Datastore Cluster B.

Answer: AB

NEW QUESTION 12

When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?

• A. After the expired backup image is restored.
• B. During the next backup window following expiry.
• C. During the next maintenance window following expiry.
• D. Immediately after the retention period has expired.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-vSphere/6.0/vmware-data-protection-administration-guide-60.pdf ‘During maintenance periods, VDP examines the backups in the appliance and evaluates whether the
backupretention period has expired. If ithas expired, VDP removes the expired backup from the appliance.’

NEW QUESTION 13

Which feature of vSphere networking protects hosts from losing connection to vCenter Server as a result of misconfiguration of the management network?

• A. NIC Teaming
• B. Private VLAN
• C. Rollback
• D. Health Check

Answer: C

Explanation:
By rolling configuration changes back, vSphere protects hosts from losing connection to vCenter Server as a result from misconfiguration of the management network.

NEW QUESTION 14

Which system traffic type cannot be configured with Network I/O Control (NIOC) bandwidth allocation?

• A. Virtual SAN traffic
• B. ESXi host Management traffic
• C. vSphere Replication traffic
• D. Software FCoE Adapter traffic

Answer: D

Explanation:
You can use NIOC to assign bandwidth for host management, virtual machines, iSCSI storage, NFS storage, vSphere vMotion, vSphere Fault Tolerance, vSAN, and vSphere Replication on the physical adapters that are connected to a vSphere Distributed Switch but not Fcoe Adapter traffic.

NEW QUESTION 15

Bydefault, how often is the vCenter vpx user password automatically changed?

• A. 15 days
• B. 45 days
• C. 60 days
• D. 30 days

Answer: D

Explanation:
vCenter Server creates the vpxuser account on each ESX/ESXi host that it manages. The password for each vpxuser account is auto-generated when an ESX/ESXi host is added. The password is updated by default every 30 days.

NEW QUESTION 16

Which two features require the use of Host Profiles? (Choose two.)

• A. vRealize Suite
• B. Auto Deploy
• C. shared storage
• D. Host Customization

Answer: BD

NEW QUESTION 17

Which two datapoints does VM Monitoring evaluate before resetting a virtual machine? (Choose two.)

• A. High CPU activity on the VM
• B. High CPU activity on the ESXi host running the VM
• C. Heartbeats sent from VMware Tools
• D. High memory utilization on the VM
• E. I/O activity

Answer: CE

NEW QUESTION 18

What is the maximum supporter number of vCPU per VM in VMware vSphere 6.5?

• A. 246
• B. 128
• C. 64
• D. 32

Answer: B

Explanation:
https://www.vmware.com/pdf/vsphere6/r65/vsphere-65-configuration-maximums.pdf

NEW QUESTION 19

Which is true when assigning global permissions in a single vSphere Single Sign-On domain in a multi-site configuration?

• A. Users assigned global permissions will be able to access objects and solutions across all Single Sign-On domains in an organization.
• B. Users assigned global permissions will be able to access objects and solutions only in the same Single Sign-On site.
• C. Users assigned global permissions will have administrator access across all objects and solutions in a Single Sign-On domain.
• D. Users assigned global permissions will be able to access objects and solutions within that Single Sign-On domain.

Answer: D

Explanation:

Global permissions are applied to a global root object that spans solutions, for example, both vCenter Server and vCenter Orchestrator. Use global permissions to give a user or group privileges for all objects in all object hierarchies. Each solution has a root object in its own object hierarchy. The global root object acts as a parent object to each solution object. You can assign global permissions to users or groups, and decide on the role for each user or group. The role determines the set of privileges. You can assign a predefined role or create custom roles.

NEW QUESTION 20

How can an administrator exclude Encryption rights from a support engineer?

• A. Clone the role virtualmachinepower user , remove Cryptographic operations privileges.
• B. Clone the role No crytography administrator and select privileges only for the support engineer.
• C. Clone the role virtual machine power user and assign to the support engineer.
• D. Clone the role Administrator and assign to the support engineer.

Answer: B

NEW QUESTION 21

Which three are supported upgrade processes for ESXi host? (Choose three.)

• A. using vSphere Auto Deploy
• B. using a TFTP server
• C. using Update Manager
• D. using an ESXCLI command
• E. installing from CIFS share

Answer: ACD

NEW QUESTION 22

What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?

• A. 2
• B. 64
• C. 1
• D. 3

Answer: D

Explanation:
For standard datacenter deployments, VSAN requires a minimum of three ESXi hosts (where each host has local storage and is contributing this storage to the VSAN datastore) to form a supported VSAN cluster
Essential Virtual SAN (VSAN): Administrator's Guide to VMware Virtual SAN (2nd Edition) (VMware Press Technology) page 14

NEW QUESTION 23

An administrator has an application that requires high CPU throughput. Which action would ensure that the application gets the required throughput?

• A. Enable Fault Tolerance on the virtual machine.
• B. Disable Fully Automated DRS.
• C. Set a CPU limit on the virtual machine.
• D. Adjust the virtual machine latency sensitivity.

Answer: D

Explanation:
You can adjust the latency sensitivity of a virtual machine to optimize the scheduling delay for latency sensitive applications.
ESXi is optimized to deliver high throughput. You can optimize your virtual machine to meet the low latency requirement of latency sensitive applications. Examples of latency sensitive applications are VOIP or media player applications, or applications that require frequent access to the mouse or keyboard devices.

NEW QUESTION 24

A working virtual machine (VM) is migrated to a new Port Group from an existing Port Group on the same switch. The VM loses network connectivity when the migration is completed.
Which could be a reason for the lack of connectivity for the VM?

• A. The new Port Group is not configured with the same VLAN ID as the existing Port Group.
• B. The Virtual Machine must be rebooted before the settings take effect.
• C. The new Port Group is not configured with the same name as the existing Port Group.
• D. The ESXi host must be rebooted before the settings take effect.

Answer: A

Explanation:
In order to migrate a new port group from an existing one on the same switch, you need to configure the same VLAN ID as the existing port group.

NEW QUESTION 25

In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)

• A. DPM
• B. Promiscuous mode
• C. LLDP
• D. CDP

Answer: CD

NEW QUESTION 26
......