Pass4sure offers free demo for 300-160 exam. "DCID Designing Cisco Data Center Infrastructure", also known as 300-160 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300-160 exam, will help you answer those questions. The 300-160 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300-160 exams and revised by experts!
Cisco 300-160 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
Which item represents a method of increasing storage utilization efficiency?
- A. thick provisioning
- B. thin provisioning
- C. transparent provisioning
- D. weighted provisioning
Answer: B
NEW QUESTION 2
Which two options are valid for Layer 3 connectivity between Cisco Nexus 1000V Series VSM and VEM? (Choose two.)
- A. an out-of-band management interface
- B. a dedicated control interface
- C. a virtual Ethernet interface
- D. a dedicated packet interface
- E. a VMware vCenter virtual machine virtual interface
Answer: AB
NEW QUESTION 3
Which data center virtualization option allows each partition to specify a different set of admisntrators and maintains its all own unique configuration and set of running software process?
- A. VRF
- B. VDC
- C. 100v VEM
- D. vPC
Answer: B
NEW QUESTION 4
Which two statements accurately describe a Cisco UCS Fabric Interconnect cluster? (Choose two )
- A. Only the active Fabric Interconnect forwards data traffic
- B. The Fabric Interconnect cluster uses a Cisco UCS B-Senes Blade Server chassis to forward data when the L1-L2 links are down
- C. The Fabric Interconnect cluster uses a virtual IP address for management connections
- D. The Fabric Interconnect uses L1-L2 links to forward data when the primary Fabric Interconnect uplinks are down.
- E. primary Fabric Inter connect node conies up after a failure, the node compares the Cisco UCS systemdatabase version to Fabric Interconnect
Answer: CE
NEW QUESTION 5
Which statement describes an interconnect link between an FCoE NPV switch and an FCF switch?
- A. The interconnect must use port type NP on the FCoE switch.
- B. The interconnect must use port type VNP on the FCoE switch.
- C. The interconnect must use port type E on the FCoE switch
- D. The FCoE switch must create the tunnel interface and bind to the physical interconnect.
Answer: B
NEW QUESTION 6
Which two STP port types are available in Cisco NX-OS? (Choose two.)
- A. normal
- B. edge
- C. blocked
- D. root
- E. point-to-point
Answer: AB
Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/layer2/configuration/guide/b_Cisco_Nexus_
You can configure a spanning tree port as an edge port, a network port, or a normal port. A port can be in only one of these states at a given time. The default spanning tree port type is normal. Edge ports, which are connected to Layer 2 hosts, can be either an access port or a trunk port
NEW QUESTION 7
For which two items can you change the default settings by using a Fibre Channel adapter policy? (Choose two.)
- A. WWNN pool
- B. queue
- C. MTU
- D. SAN pin group
- E. RSS hash
Answer: BE
NEW QUESTION 8
Which two options are advantages when using NPIV? (Choose two.)
- A. allows a single physical N-Port to have single WWPNs, and therefore single N-Port IDs, associated with it
- B. NPIV-enabled physical N-Port can subsequently issue additional commands to register more WWPNs and receive more N-Port IDs (one for each WWPN).
- C. allows a 'single' physical N-Port to have multiple WWPNs, and therefore multiple N-Port IDs, associated with it
- D. NPV-enabled physical N-Port can subsequently issue additional commands to register more WWPNs and receive more N-Port IDs (one for each WWPN).
- E. allows 'multiple' single physical N-Port to have multiple WWPNs, and therefore multiple N-Port IDs, associated with it
- F. N-Port on the physical host would have only a single WWPN (and N-Port ID).
Answer: BC
NEW QUESTION 9
Which statement accurately describes Cisco NSF?
- A. To configure NSF for an OSPF routing environment, all Area 0 devices and ABRs must be NSF-aware and must be configured for OSPF graceful restart.
- B. To configure NSF for an IS-IS routing environment, only L1 routers must be NSF-aware and must be configured for IS-IS graceful restart
- C. To configure NSF for a BGP routing environment, all neighboring devices must be NSF-aware and must be configured for BGP graceful restart
- D. To configure NSF for an IS-IS routing environment, only L2 routers must be NSF-aware and must be configured for IS-IS graceful restart
Answer: C
NEW QUESTION 10
Which technology can you use to create separate routing tables for different tenants that are hosted on the same Cisco NX-OS platform?
- A. Cisco FabricPath
- B. VLANs
- C. vPC
- D. VRF
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/vxlan/configuration/guide/b_NX-OS_VXL
NEW QUESTION 11
You plan to configure OTV multicast. What must you enable to use SSM?
- A. IGMFv3
- B. PIM-DM
- C. IGMPv2
- D. PIM-SM
- E. PIM Anycast-RP
Answer: D
NEW QUESTION 12
What is required when configuring the second fabric interconnect in a cluster configuration?
- A. The IP address of the default gateway must be on the same subnet as the peer fabric interconnect.
- B. The system name of the second fabric interconnect must be different from the system name of the first fabric interconnect.
- C. The IP address of the management port must be in the same subnet as the peer fabric interconnect.
- D. The first and the second fabric interconnects must be able to reach the DNS.
Answer: B
NEW QUESTION 13
Which two components are contained within a device package that is installed on a cisco APIC?
- A. A device SDK
- B. A device driver
- C. A device Specification
- D. Device script
- E. Device management software
Answer: CD
NEW QUESTION 14
Which option accurately describes the OSPF Graceful Restart feature in Cisco NX-OS?
- A. keeps the control plane state active during an OSPF process restart
- B. shuts down the OSPF process gracefully to replace the router
- C. prevents the OSPF process from restarting when the process crashes
- D. allows a router to remain in the data forwarding path during an OSPF process restart
Answer: D
Explanation:
A graceful restart, or nonstop forwarding (NSF), allows OSPFv2 to remain in the data forwarding path through a process restart. When OSPFv2 needs to perform a graceful restart, it sends a link-local opaque (type 9) LSA, called a grace LSA
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos
NEW QUESTION 15
Which two items represent data center virtualization technologies? (Choose two.)
- A. ECMP
- B. GLBP
- C. LUN
- D. VSAN
- E. L2 firewall
Answer: CD
NEW QUESTION 16
Which two Nexus 7000 licenses are required to manage FabricPath from Cisco Data Center Network Manager (DCNM)? (Choose two.)
- A. Nexus 7000 Enhanced Layer 2 License
- B. Nexus 7000 Transport Services License
- C. Cisco DCNM for SAN Advanced Edition for Nexus 7000
- D. Nexus 7000 LAN Enterprise License
- E. Cisco DCNM for Nexus 7000
- F. Nexus 7000 Scalable Feature License
Answer: AE
NEW QUESTION 17
How is oversubscription between disk arrays and hosts calculated when you use only line-rate capable line cards?
- A. by dividing the total bandwidth of the disk array ports by the total bandwidth of the Inter-Switch Links
- B. dividing the total bandwidth of the host ports by the total bandwidth of the disk array ports
- C. by dividing the total bandwidth of the host ports by the total bandwidth of the Inter-Switch Links
- D. by dividing the total bandwidth of the disk array ports by the total bandwidth of the host ports
Answer: B
NEW QUESTION 18
What is used to insert services when using Layer 4 to Layer 7 service insertion in the Cisco ACI?
- A. device scripts
- B. tenant administrators
- C. policies
- D. function profiles
Answer: D
NEW QUESTION 19
Which option must be enabled to allow line-rate forwarding on a Fibre Channel port?
- A. F port
- B. TEport
- C. dedicated mode
- D. shared mode
- E. E port
Answer: C
NEW QUESTION 20
Which two options are reasons to use Layer 3 routing to segment a data center instead of Layer 2 switching? (Choose two)
- A. Simply design
- B. Ease of routing protocol configuration
- C. Limit the scope of broadcast flooding
- D. Cost
- E. Limit the scope of spanning Tree Protocol
Answer: CE
NEW QUESTION 21
......
P.S. Certshared now are offering 100% pass ensure 300-160 dumps! All 300-160 exam questions have been updated with correct answers: https://www.certshared.com/exam/300-160/ (137 New Questions)