Master the 350-601 Implementing and Operating Cisco Data Center Core Technologies content and be ready for exam day success quickly with this Testking 350-601 testing engine. We guarantee it!We make it a reality and give you real 350-601 questions in our Cisco 350-601 braindumps.Latest 100% VALID Cisco 350-601 Exam Questions Dumps at below page. You can use our Cisco 350-601 braindumps and pass your exam.
Free demo questions for Cisco 350-601 Exam Dumps Below:
NEW QUESTION 1
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. IOMs
- B. Cisco UCS Manager
- C. board controller
- D. adapters
- E. BIOS
Answer: AC
NEW QUESTION 2
Port security is enabled on a Cisco MDS 9000 Series Switch.
Which statement is true?
- A. Port security can be enabled only globally and affects all VSANs.
- B. Any devices currently logged in must be added manually to the device database.
- C. Auto-learning is always enabled automatically when port security is enabled.
- D. Cisco Fabric Services must be disabled before enabling port security.
Answer: C
NEW QUESTION 3
When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?
- A. A large system image is copied to a switch by using the default VRF.
- B. Fifteen SSH sessions remain connected to the switch.
- C. A ping sweep is performed on a network that is connected through a switch.
- D. A web server that is connected to a switch is affected by a DDoS attack.
Answer: D
NEW QUESTION 4
What is an advantage of using Ansible for automation as compared to Puppet and Chef?
- A. Ansible performs automation without installing a software agent on the target node.
- B. Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems.
- C. Ansible automates the enforcement of configuration settings.
- D. Ansible configures a set of CLI commands on a device by using NETCONF.
Answer: A
NEW QUESTION 5
DRAG DROP
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration. Drag and drop the commands on the left to the correct order on the right.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 6
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of a UCS C-series rack mount server.
What setting will accomplish this goal?
- A. C6 Retention
- B. C6 non-Retention
- C. C2 state
- D. C0/C1 state
Answer: A
NEW QUESTION 7
Which virtual MAC address is the default for HSRP version 2 group 10?
- A. 0000.5E00.0110
- B. 0000.0C9F.F00A
- C. 3716.1350.1C0A
- D. 0000.0C9F.F010
Answer: B
NEW QUESTION 8
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?
- A. GET to aaaListDomains
- B. POST to aaaRefresh
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
NEW QUESTION 9
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2021 for a keyring that is named kr2021 needs to be created. The cluster IP address is 10.68.68.68.
Which command set creates this certificate request?
- A. UCS-A # scope keyring kr2021UCS-A /keyring # create certreq 10.68.68.68 sjc2021UCS-A /keyring* # commit-buffer
- B. UCS-B # scope keyring kr2021UCS-B /keyring # create certreq ip 10.68.68.68 subject-name sjc2021 UCS- B /keyring* # commit-both
- C. UCS-B# scope securityUCS-B /security # scope keyring kr2021UCS-B /security/keyring # set certreq 10.68.68.68 sjc2021UCS-B /security/keyring* # commit-both
- D. UCS-A# scope securityUCS-A /security # scope keyring kr2021UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2021 UCS- A /security/keyring* # commit-buffer
Answer: D
NEW QUESTION 10
Refer to the exhibit.
Why does the Python code for Cisco NX-API print an error message?
- A. The JSON is not a supported format for the NX-API.
- B. The "type" is wrong in the header of the request and should be "cli_conf"
- C. NX-API does not allow configuration for features via the requests module.
- D. The "type" is wrong in the body of the request and should be "cli_conf"
Answer: C
NEW QUESTION 11
DRAG DROP
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 12
Refer to the exhibit.
A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server.
Which configuration must be added on the remote OTV AEDs site? A.
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION 13
What is a feature of NFS?
- A. zone-based access control
- B. Kerberos-based security model
- C. block-based file access
- D. role-based access control
Answer: B
NEW QUESTION 14
A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level.
Which two components support specific power limits? (Choose two.)
- A. storage controller
- B. network controller
- C. processor
- D. graphic card
- E. memory
Answer: AB
NEW QUESTION 15
What happens to the default host firmware policy after a Cisco UCS Manager upgrade?
- A. It is assigned to all the service profiles that include a host firmware policy.
- B. It is replaced by a new default policy without any firmware entries.
- C. It is set to match the host firmware policy.
- D. It is updated to contain the firmware entries of all the components.
Answer: A
NEW QUESTION 16
An engineer is implementing an import operation in Cisco UCS Manager.
What is the impact of performing this operation?
- A. Information can be modified on the management plane only.
- B. A configuration can be imported from a higher release to a lower release.
- C. An import operation can be scheduled.
- D. Only a configuration file that was exported from the same Cisco UCS Manager can be imported.
Answer: A
NEW QUESTION 17
Refer to the exhibit.
What is the result of this series of commands?
- A. It reboots the server immediately.
- B. It activates the firmware on the next adapter boot.
- C. It updates the firmware on adapter 1/1/1 immediately.
- D. It verifies the firmware update on the server.
Answer: B
NEW QUESTION 18
An engineer is duplicating an existing Cisco UCS setup at a new site.
What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
- A. contains the configured organizations and locales
- B. contains the VLAN and VSAN configurations
- C. contains the AAA and RBAC configurations
- D. contains all of the configurations
- E. contains a file with an extension tgz that stores all of the configurations
Answer: BC
NEW QUESTION 19
When the default firmware package is set to a new version, which type of policy determines the liming of server reboots during the firmware upgrade?
- A. diagnostics
- B. maintenance
- C. local disk
- D. BIOS
Answer: B
NEW QUESTION 20
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 192.168.254.4
- B. 192.168.254.1
- C. 192.168.254.2
- D. 239.255.70.83
Answer: A
NEW QUESTION 21
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual- site adjacency?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION 22
Which configuration generates a syslog message when CPU utilization is higher than 60%?
- A. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
- B. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
- C. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
- D. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
Answer: A
NEW QUESTION 23
......
Thanks for reading the newest 350-601 exam dumps! We recommend you to try the PREMIUM 2passeasy 350-601 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/350-601/ (0 Q&As Dumps)