[Guaranteed] 70-347 Microsoft exam cost 18-34 (Apr 2016)

Highest Quality of 70-347 exam topics materials and bootcamp for Microsoft certification for customers, Real Success Guaranteed with Updated 70-347 pdf dumps vce Materials. 100% PASS Enabling Office 365 Services exam Today!

2016 Apr 70-347 Study Guide Questions:

Q18. Your company has an Office 365 subscription. A user named Test5 has a mailbox. You need to ensure that all of the email messages sent and received by Test5 are accessible to members of the audit department for 60 days, even if Test5 permanently deletes the messages. 

What should you do? 

A. Run the Set-User cmdlet. 

B. Run the Set-Mailbox cmdlet. 

C. Run the Set-RetentionPolicyTag cmdlet. 

D. Run the Set-MailboxDatabase cmdlet. 

E. Run the Set-RetentionPolicy cmdlet. 

Answer: B 


Q19. You are the Office 365 administrator for Contoso, Ltd. 

Some email messages sent from the trusted domain fabrikam.com are being rejected as spam. Some of these email messages originate inside the fabnkam.com network, and some of them originate from an application in the fabrikam.com co-located data center. 

The fabrikam.com systems administrators have asked you to add their domain and the IP addresses of the data center that hosts their external application to your list of safe senders. 

You need to configure Microsoft Exchange Online Protection. 

Which two actions should you perform? Each correct answer presents part of the solution. 

A. Configure a content filter to allow the fabrikam.com domain. 

B. Configure a mail flow rule to bypass spam filtering for the data center IP address range. 

C. Create a connection filter to allow the data center IP address range. 

D. Add the fabrikam.com domain as an accepted domain. 

E. Create an inbound connector for the fabrikam.com domain. 

F. Configure a mail flow rule to bypass spam filtering for the fabrikam.com domain. 

Answer: C,F 

Explanation: 

References: http://blogs.msdn.com/b/tzink/archive/2013/07/02/how-to-use-safe-senders-in-eop-and-fope.aspx http://www.msexchange.org/kbase/ExchangeServerTips/MicrosoftOffice365/ExchangeOnline/safe-andblocked-senders-list-owa-2013-and-office-365.html http://technet.microsoft.com/en-GB/library/dn198251(v=exchg.150).aspx 

Connection Filters 

http://technet.microsoft.com/en-us/library/jj200718(v=exchg.150).aspx 


Q20. You are the Microsoft Lync administrator for a company that uses Lync Online. 

The company has mandated that employees may use Lync Online to communicate with contacts from approved external domains. 

You need to configure Lync Online to allow Lync federation with only three specific domains. You must achieve this goal by using the least amount of administrative effort. 

Which two actions should you perform? Each correct answer presents part of the solution. 

A. In the Lync admin center, set the External Access option to On except for blocked domains. 

B. In the Office 365 admin center, add the three domains to the domain list and set the domain intent for each domain to Lync Online. 

C. In the Lync admin center, set the External Access option to Off completely. 

D. In the Lync admin center, set the External Access option to On only for allowed domains. 

E. In the Lync admin center, configure the Presence Privacy Mode option to display presence information only to the users' contacts. 

F. In the Lync admin center, add the three domains to the Blocked Or Allowed Domains list. 

Answer: D,F 

Explanation: 

References: http://solveit.openjive.com/post/2014/01/27/Lync-Federation-with-Office-365Lync-Online http://technet.microsoft.com/en-us/library/hh852512.aspx http://technet.microsoft.com/en-us/library/jj205126.aspx 


Q21. HOTSPOT 

Your company has an Office 365 subscription and uses Microsoft Lync Online. The environment includes the domains shown in the following image, and is configured as shown in the exhibit. (Click the Exhibit button.) 



Lync is not deployed in a hybrid configuration. 

An employee requires specific Lync communication settings. The employee’s account is configured as shown in the following image. 


For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point. 


Answer: 



Q22. Your company has an Office 365 Enterprise El subscription. 

The company wants to implement an enterprise document collaboration and social networking platform that allows users to upload documents from their computers and conduct informal polls. 

You need to implement a solution that meets the requirements. 

Which solution should you implement? 

A. Microsoft SharePoint document libraries 

B. Microsoft SharePoint surveys 

C. Microsoft Yammer 

D. Microsoft SharePoint newsfeeds 

E. Microsoft SkyDrive Pro 

Answer: C 


70-347 practice test

Up to the minute 70-347 answers:

Q23. DRAG DROP 

You are the Office 365 administrator for your company. 

You have been hired to migrate a legacy email solution to Office 365. You are creating a migration plan to identify the client computer components that must be updated for use with Office 365. The following table describes the two computer configurations that are part of the migration. 


You need to identify the required updates. 

Which updates are required? To answer, drag the appropriate status to the correct targets. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 


Answer: 



Q24. A company uses Skype for Business Online. You use contoso.com as the verified domain name for the Office 365 tenant. Users conduct Skype online meetings. You add fabricam.com to the tenant and configure the tenant to use this domain name. 

You need to ensure that all Skype online meeting URLs contain the new domain name. 

Which Windows PowerShell cmdlet should you run? 

A. Update-CsTenantMeetingUrl 

B. Set-CsMeetingConfiguration 

C. Set-CsUser 

D. Set-CsMeetingRoom 

E. New-CsSimpleURL 

Answer: E 

Explanation: 

The New-CsSimpleURL command Creates a new simple URL, which can then be added to a simple URL configuration collection. Simple URLs make it easier for users to join meetings and conferences, and also make it easier for administrators to log on to the Skype for Business Server Control Panel. 

Example: The example shows how a new URL can be added to an existing collection of simple URLs. To begin with, the first command in the example uses the New-CsSimpleUrlEntry cmdlet to create a URL entry that points to https://meet.fabrikam.com; this URL entry is stored in a variable named $urlEntry. In the second command, the New-CsSimpleUrl cmdlet is used to create an in-memory-only instance of a simple URL. In this example, the URL Component is set to Meet; the domain is set to fabrikam.com; the ActiveUrl is set to https://meet.fabrikam.com; and the SimpleUrl 

property is set to $urlEntry, with $urlEntry being the URL entry created in the first 

command. 

After the URL has been created (and stored in the object reference $simpleUrl) the final command in the example adds the new URL to the simple URL collection for the Redmond site. This is done by using the Set-CsSimpleUrlConfiguration cmdlet, the SimpleUrl parameter, and the parameter value @{Add=$simpleUrl}. This syntax causes the URL stored in the object reference $simpleUrl to be added to the SimpleUrl property. 

$urlEntry = New-CsSimpleUrlEntry -Url "https://meet.fabrikam.com" 

$simpleUrl = New-CsSimpleUrl -Component "meet" -Domain "fabrikam.com" -

SimpleUrlEntry $urlEntry -ActiveUrl "https://meet.fabrikam.com" 

Set-CsSimpleUrlConfiguration -Identity "site:Redmond" -SimpleUrl @{Add=$simpleUrl} 

Incorrect: 

Not A: The Update-CsTenantMeetingUrl command updates the meeting URL for the specified Lync Online tenant. The updated URL uses a simpler, more standardized format that makes it easier for clients to locate and connect to meetings. 

Example: 

The command shown in example updates the meeting URL for the tenant with the tenant ID 38aad667-af54-4397-aaa7-e94c79ec2308. (Note that you must supply the tenant ID in order for this command to complete.) After pressing ENTER to run the command, you will be asked if you are sure you want to update the meeting URL. You must answer yes to this prompt before Update-CsTenantMeetingUrl will actually make any changes to your Lync Online configuration settings. 

Update-CsTenantMeetingUrl -Tenant "38aad667-af54-4397-aaa7-e94c79ec2308" 

Not B: Set-CsMeetingConfiguration enables you to modify the meeting configuration settings currently in use in your organization. Meeting configuration settings help dictate the type of meetings (also called conferences) that users can create, and also control how (or even if) anonymous users and dial-in conferencing users can join these meetings. Note that these settings only affect scheduled meetings; they do not affect ad-hoc meetings created by clicking the Meet Now option in Skype for Business. 

Reference: New-CsSimpleUrl 

https://technet.microsoft.com/en-us/library/gg398180.aspx 


Q25. You are the Office 365 administrator for your company. Any communication to the Internet using a port other than 80 requires a unique firewall rule to be configured. 

You successfully deploy Office 365 ProPlus to all users by using Click-to-Run for Office 365. Users install and activate Office 365 ProPlus. 

Thirty days after activation, users report that they are unable to edit files by using any Office applications. 

You need to ensure that users can edit files. 

For which site should you configure a firewall exception? 

A. https://activation.sls.microsoft.com 

B. https://ols.officeapps.live.com/olsc 

C. http://ols.officeapps.live.com/olsc 

D. http://officecdn.microsoft.com 

Answer: A 

Explanation: The activation.sls.microsoft.com url is needed to renew the product key approximately every 30 days for Office 365 ProPlus users. 

Incorrect: 

Not B: The ols.officeapps.live.com URL is the Office Licensing Service, which is used during activation and subscription maintenance. 

Reference: Office 365 URLs and IP address ranges 

https://support.office.com/en-us/article/Office-365-URLs-and-IP-address-ranges-8548a211-3fe7-47cb-abb1-355ea5aa88a2?ui=en-US&rs=en-US&ad=US 


Q26. DRAG DROP 

A company has an Office 365 tenant. All employee mailboxes are in Exchange Online. You plan to implement archiving. 

The archive name for each archive mailbox must use the following format: “Archive-” followed by the display name of the user. 

You need to enable online archives for all mailboxes. 

Which three Windows PowerShell commands should you run in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. 


Answer: 



Q27. DRAG DROP 

You are the Office 365 administrator for a company. You deploy Office 365 ProPlus. You plan to implement a software change control process for software updates. 

You have a group of test users that need custom updates. 

You need to install updates for only the test users. 

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. 


Answer: 



70-347 free download

Actual 70-347 rapidshare:

Q28. HOTSPOT 

Your company subscribes to Office 365 Small Business. 

You need to disable all contact synchronization. 

Which two service categories should you configure? To answer, select the appropriate service categories in the answer area. 


Answer: 



Q29. DRAG DROP 

An organization has an Office 365 tenant that uses an Enterprise E3 subscription. The organization plans to migrate users to Office 365. You do not want users to install Office 365 ProPlus until you complete the migration. 

You need to prevent all users from self-provisioning Office 365 ProPlus. 

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. 


Answer: 



Q30. A company uses Office 365 ProPlus. The company has a main office and a remote office. The remote office experiences occasional bandwidth issues. 

You must deploy Visio Pro for Office 365 to selected users in a satellite office that experiences bandwidth issues. 

You need to deploy Visio Pro for Office 365 to a specific set of users. 

What should you do? 

A. Download the installer to a local network share and use the Office Deployment Tool to deploy the application to client. 

B. Use the Office 365 portal to allow users to deploy Visio Pro. 

C. Use the Office 365 portal to allow users to deploy Office 365 ProPlus. 

D. Download the installer to each local machine and use the Office Deployment Tool to deploy the application to the client. 

Answer: A 

Explanation: 

To deploy Office 365 ProPlus from an on-premises location, such as a local network share, you'll have to use the Office Deployment Tool to download the Office 365 ProPlus software from Office 365. 

Reference: Determine the deployment method to use for Office 365 ProPlus 

https://technet.microsoft.com/en-us/library/gg998766.aspx 


Q31. You manage an Office 365 tenant that uses an Enterprise E1 subscription. You create a policy to record email messages for all recipients. 

You observe that email messages are not being recorded. 

Which Windows PowerShell cmdlet should you run? 

A. Enable-JournalRule 

B. New-RetentionPolicyTag 

C. Start-ManagedFolderAssistant 

D. Set-CsUser 

E. Set-CsPrivacyConfiguration 

F. Set-HostedContentFilterPolicy 

G. Set-MalwareFilterPolicy 

H. Set-MailboxJunkEmailConfiguration 

Answer: F 

Explanation: 

Use the Set-HostedContentFilterPolicy cmdlet to modify the settings of content filter policies in your cloud-based organization. 

Incorrect: 

Not A: You can enable or disable specific journal rules in your organization at any time using the Enable-JournalRule and Disable-JournalRule cmdlets. 

Not B: Use the New-RetentionPolicyTag cmdlet to create a retention tag. 

Retention tags are used to apply retention settings to folders and individual items such as e-mail messages and voice mail. These settings specify how long a message remains in a mailbox and the action to be taken when the message reaches the specified retention age. 

When a message reaches its retention age, it's moved to the user’s In-Place Archive or deleted. 

Not C: The Set-CsUser cmdlet is used to modify a user account. 

Not G: Use the Set-MalwareFilterPolicy cmdlet to modify malware filter policies in your organization. 

Not H: Use the Set-MailboxJunkEmailConfiguration cmdlet to configure the junk email rule for specific mailboxes. 

Reference: Set-HostedContentFilterPolicy 

https://technet.microsoft.com/en-us/library/jj200781(v=exchg.150).aspx 


Q32. You are the Office 365 administrator for your company. The company’s environment includes only Office 2013 and Windows 8. 

Users are not allowed to install applications on client computers. 

You need to enable Office Telemetry logging. 

What should you do? 

A. In Group Policy, enable logging in the User Configuration\Administrative Templates\Microsoft Office 2013\Telemetry Dashboard node. 

B. Create a .reg file that sets the registry values under the HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\15.0\OSM key to enable the Telemetry Agent to collect and upload data. Run the .reg file with standard privileges. 

C. In Group Policy, enable logging in the User Configuration\Administrative Templates\Microsoft Office 2013\Telemetry logging node. 

D. Create a .reg file that sets the registry values under the HKEY_LOCAL_MACHINE\Software\Microsoft\Office\15.0 key to enable Telemetry Agent to collect and upload data. Run the .reg file with standard privileges. 

Answer: A 

Explanation: The Telemetry Agent must be enabled using Group Policy or the registry.

.For production environments that contain hundreds or thousands of client computers, you can use Group Policy administrative templates..

You can use Group Policy to enable and configure Telemetry Agents. Download the Group Policy admininstrative template files from the Microsoft Download Center. The policy settings are available in the path User Configuration\Administrative Templates\Microsoft Office 2013\Telemetry Dashboard. 

Incorrect: 

Not C: Incorrect Group Policy Node. 

Not D: Incorrect Registry key. 

Not B: This would work, but it would require too much administrative effort. For production environments that contain hundreds or thousands of client computers, you should use Group Policy administrative templates. 

Note: Use the registry to enable and configure Telemetry Agent 

The easiest way to update the registry on a single client is to run a .reg file that sets the registry values that enable Telemetry Agent to collect and upload data. 

Telemetry Agent registry settings are located under HKEY_CURRENT_USER\Software\ Policies\Microsoft\Office\15.0\OSM key. 

Reference: Deploy Telemetry Dashboard 

https://technet.microsoft.com/en-us/library/f69cde72-689d-421f-99b8-c51676c77717#configure 


Q33. Your company has a hybrid deployment of Office 365. You need to create a group. The group must have the following characteristics: 

. Group properties are synchronized automatically. 

. Group members have the ability to control which users can send email messages to the group. 

What should you do? 

A. Create a distribution group and configure the Mail Flow Settings. 

B. Create a dynamic distribution group. 

C. Create a new role group. 

D. Create a distribution group and configure the Membership Approval settings. 

Answer: A 


Q34. You manage an Office 365 tenant that uses an Enterprise E1 subscription. 

A user receives frequent email messages from a specific domain that are flagged as spam. 

You need to ensure that the domain name is not flagged as spam for only the user. 

Which Windows PowerShell cmdlet should you run? 

A. Enable-JournalRule 

B. New-RetentionPolicyTag 

C. Start-ManagedFolderAssistant 

D. Set-CsUser 

E. Set-CsPrivacyConfiguration 

F. Set-HostedContentFilterPolicy 

G. Set-MalwareFilterPolicy 

H. Set-MailboxJunkEmailConfiguration 

Answer: H 

Explanation: 

Use the Set-MailboxJunkEmailConfiguration cmdlet to configure the junk email rule for specific mailboxes. 

The junk email rule helps Microsoft Outlook and Outlook Web App users to automatically remove any spam that gets past anti-spam filters and reaches the users' mailboxes. With this cmdlet, users and administrators can make changes to the junk email rule that's configured for a specific mailbox. 

Example: This example disables the junk email rule configuration for the user named David Pelton. 

Set-MailboxJunkEmailConfiguration "David Pelton" -Enabled $false 

Incorrect: 

Not G: Use the Set-MalwareFilterPolicy cmdlet to modify malware filter policies in your organization. 

Reference: Set-MailboxJunkEmailConfiguration 

https://technet.microsoft.com/en-us/library/dd979780(v=exchg.150).aspx 



see more 70-347 - Enabling Office 365 Services

Microsoft 70-347 Certification Sample Questions and Answers: http://www.braindumpsall.net/70-347-dumps/

P.S. New 70-347 dumps PDF: http://www.4easydumps.com/70-347-dumps-download.html