NEW QUESTION 1
HOTSPOT
You have a server named Server1 that runs Windows Server 2021.
On Server1, you plan to create a new volume named Volume1. Volume1 will contain image files.
You need to identify which file system and which cluster size to configure for Volume1. The solution must ensure that the image files will be compressed by using file system compression.
Which file system and cluster size should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2021. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: You replace the processor in Host1 with a processor that is identical to the processor in Host2.
Does meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 3
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2021 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

• A. Create a firewall rule 10 allow TCP port 443.
• B. Create a firewall rule to allow TCP port 8531.
• C. Require- SSI Oil the Client WebService virtual directory.
• D. Require SSI on the Inventory virtual directory.

Answer: D

NEW QUESTION 4
Note: This question is part of a series questions that present the same scenario, Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server l that runs Windows Server 2021. Server l is a Docker Host.
You are creating a Docker file lo build 3 Docker image.
You need to add a file named Filel.txt from Server to, C:folderl in the Docker image.
What are two possible commands that you can use to achieve the goal/ Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. COPY file1.txt c:/folder1/
• B. copy-item file1.txt folder1file1.txt
• C. ROBOCOPY file.txt folder1
• D. XCOPY file1.txt c:folder1
• E. ADD file1.txt /folder1/

Answer: AE

NEW QUESTION 5
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2021. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows tog files for all of the servers on the network.
VM1 has four virtual processors.
You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2021.
Server l has an ReFS-formatted volume D: and an NTFS-formatted volume E:. the- volumes do not contain any data.
You Install the Data Deduplication role service on Server l.
You need to implement Data Deduplicalion for volumes on Di and E:.
Solution; From Windows PowerShell. you run Format-Volume D: -FlleSystem NTFS and Enable- DeDupVolume-Volume D:,E:.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 7
You plan to deploy three servers that will run Windows Server 2021. The servers will be configured as
shown in the following table.

You need to ensure that you can use all of the available space on each disk. What is one of the disks that you must initialize as a GPT disk?

• A. Disk2 on Server3
• B. Disk1 on Server2
• C. Disk3 on Server2
• D. Disk1 on Sever3

Answer: D

NEW QUESTION 8
You have two servers named Server1 and Server2 that run Windows Server 2021.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100
Mbps.
Which cmdlet should you run?

• A. New-NetQosPolicy
• B. Set-NetworkController
• C. New-NetTransportFilter
• D. New-StorageQosPolicy
• E. Set-NetTCPSetting
• F. Set-NetUDPSetting

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/powershell/module/netqos/new-netqospolicy?view=win10-ps

NEW QUESTION 9
HOTSPOT
You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

NEW QUESTION 10
You have two servers that run Windows Server 2021. The servers are configured as shown in the following table.

You need to create a failover cluster that contains both servers.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. wmic ComputerSystem Set Workgroup= “Workgroup2”
• B. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint DNS
• C. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint ActiveDirectoryAndDns
• D. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint None
• E. netdom computername Server1/MakePrimary:server1.contoso.com

Answer: AB

NEW QUESTION 11
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains four virtual machines that are configured as shown in the following table.

To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?

• A. VM1, VM2, VM3 and VM4
• B. VM4 only
• C. VM1 and VM2 only
• D. VM3 and VM4 only
• E. VM2 only

Answer: D

NEW QUESTION 12
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows PowerShell on Server1, you run the Export-DnsServerDnsSecPublicKey cmdlet
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 13
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have two servers named Server1 and Server2 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed
An iSCSI SAN connects to the network
You create a LUN on the SAN and configure both servers to connect to the iSCSI target
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage
You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage
simultaneously.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: F

NEW QUESTION 14
Your network contains an Active Directory domain.
The domain contains two Hyper-V hosts.
You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

• A. From Server Manager, install the Host Guardian Service server role on a domain controller.
• B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
• C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
• D. From Server Manager, install the Host Guardian Service server role on both servers.

Answer: C

Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.

NEW QUESTION 15
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1
A virtual machine named VM1 runs on Server1
You need to migrate the storage on VM1 to Cluster1 Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 16
You have a server named Server1 that runs Windows Server 2021. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.
You create a virtual machine named VM1 on Server1 by running the following cmdlets.

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
What should you do?

• A. Modify the SwitchType parameter of Switch1.
• B. Modify the DefaultFlowMinimumBandwidthWeight parameter of Switch1.
• C. Add a SCSI controller to VM1.
• D. Add a legacy network adapter to VM1.

Answer: D

NEW QUESTION 17
You need to modify the GPO prefix by IPAM. What should you do?

• A. Run theSet-lpamConfigurationcmdlet
• B. ClickProvision the IPAM serverin Server Manager.
• C. ClickConfigure server discoveryin Server Manage
• D. Run thelnvoke-lpamGpoProvisioningcmdlet

Answer: A

NEW QUESTION 18
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021 datacenter. Server1 is activated.
On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2021 Standard.
You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://blogs.technet.microsoft.com/askcore/2013/11/13/activating-virtual-machines- via-automatic-virtual-machine-activation-in-windows-server-2012-r2/

NEW QUESTION 19
HOTSPOT
Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
You enable Response Rate Limiting on Server1.
You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24.
Which cmdlets should you run? To answer, select the appropriate options in the answer area

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo- roles/

NEW QUESTION 21
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure
device registration You need to configure Active Directory to support the planned deployment. Solution You raise the forest functional level to Windows Server 2012R2.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 22
You have a server named Server1 that runs Windows Server 2021 You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

• A. the Network Policy and Access Services server role
• B. the Remote Access server rote
• C. the Data Center Bridging feature
• D. the Network Controller server role

Answer: B

NEW QUESTION 23
You have a Windows Server 2021 failover cluster named Ousted that contains three nodes named
Server 1, Server 2, and Server 3. Each node hosts several virtual machines. the virtual machines are configured to fail over to another node in Ousted if the hosting node tails.
You need to ensure that it if the Cluster service tails on one of the nodes, the virtual machine of that node will fail over immediately.
Which setting should you configure?

• A. failureConditionLevel
• B. QuarantineDuration
• C. Resiliency Period
• D. ResiliencyLevel

Answer: B

NEW QUESTION 24
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet. You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”
You need to successfully start Nano server. What should you do?

• A. Attach Nano1.vhdx to a SCSIcontroller.
• B. Recreate Nano1 as a Generation 2 virtual machine.
• C. Increase the memory of Nano1 to 512 Mb.
• D. Modify the BIOS settings of Nano1.

Answer: B

Explanation:
A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

NEW QUESTION 25
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
Server1 allows inbound connectivity from all computers in the contoso.com domain. Server1 has an IP address of 192.168.0.10.
Server1 hosts a Windows container named Container1. Container1 hosts a website that is accessible on port 80.
You need to ensure that you can use the Docker(?) client to manage Container1 from any computer in the domain.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 26
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, white others might not have a correct solution. Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:Sysprep on each virtual machine, and then you run the Apply-Image cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 27
You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes.
You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute.
Which settings should you modify?

• A. QuarantineDuration and QuarantineThreshold
• B. SameSubnetDelay and CrossSubnetDelay
• C. QuorumArbitrationTimeMax and RequestReplyTimeout
• D. ResiliencyPeriod and ResiliencyLevel

Answer: C

Explanation:

References: https://msdn.microsoft.com/en-us/library/aa369123(v=vs.85).aspx https://msdn.microsoft.com/en-us/library/bb394696(v=vs.85).aspx

NEW QUESTION 28
Nano Server is foundational to the modern datacenter and is useful in two core scenarios: As a private cloud infrastructure it's particularly useful for clustered Hyper-V, clustered storage and core networking services scenarios; or as an application platform it's highly optimized for modern distributed and cloud-based apps which leverage containers and micro service architectures.
Is the following statement TRUE or FALSE?
A local interface with UI support is available for offline management of Nano Servers?

• A. TRUE
• B. FALSE

Answer: B

Explanation:
A local interface with UI support is NOT available for Nano servers. You must administer them remotely using PowerShell.

NEW QUESTION 29
Note This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
• E ach virtual machine has one virtual network adapter
• VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated Scenario.
You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
What should you do?

• A. Configure the virtual machines as shielded virtual machines.
• B. Run the Set-VMProcessor cmdlet and specify the –EnableHostResourceProtection Parameter.
• C. Run the Set-VMProcessor cmdlet and specify the –MaximumCountPerNumaNode Parameter.
• D. Configure VM Network Adapter Isolation.

Answer: B

NEW QUESTION 30
......