NEW QUESTION 1

You must verify that interface ge-0/0/0.0 is administratively up and that the link is up. In this scenario, which command will accomplish this task?

• A. show configuration interfaces ge-0/0/0.0
• B. show chassis fpc pic-status
• C. show system information
• D. show interfaces terse

Answer: D

NEW QUESTION 2

Which two statements describe firewall filters? (Choose two.)

• A. Firewall filters are applied to interfaces.
• B. Firewall filters are applied to security policies
• C. Firewall filters provide stateless security.
• D. Firewall filters provide stateful security.

Answer: AC

NEW QUESTION 3

Which two keystrokes are used to auto-complete commands? (Choose two.)

• A. Spacebar
• B. Esc
• C. Tab
• D. End

Answer: AC

NEW QUESTION 4

You are connected to your Junos device using an SSH connection to the txp0 interface. No other interfaces are currently configured and unreachable from your management network. How would you reestablish communication with the device?

• A. Establish a SSH connection to the loopback interface
• B. Unplug the network cable and plug it back in
• C. Power off and power on the device
• D. Connect to the console of the device

Answer: D

NEW QUESTION 5

A BGP route does not match any term within a routing policy applied to BGP. Which action is taken by the router for this route?

• A. It discards the route by the implicit ‘discard all’ at the end of the policy.
• B. It advertises the route according to BGP rules.
• C. It discards the route by the default routing protocols policy.
• D. It discards the route because it is unable to match the route to a configured action.

Answer: B

NEW QUESTION 6

Which three connection protocols allow you to gather operational information from the Junos device? (Choose three.)

• A. NETCONF
• B. Telnet
• C. XML
• D. JSON
• E. SSH

Answer: ABE

NEW QUESTION 7


Which command produced the output shown in the exhibit?

• A. Show interfaces summary
• B. Show interfaces filters
• C. Show interfaces extensive
• D. Show interfaces terse

Answer: D

NEW QUESTION 8

What is the maximum number of rollback files a Junos device can store?

• A. 5
• B. 10
• C. 49
• D. 50

Answer: D

NEW QUESTION 9

Click the Exhibit button.

Referring to the exhibit, which statement is correct?

• A. The device will attempt to authenticate using the local database if RADIUS and TACACS+ are unresponsive.
• B. The device will never attempt to authenticate using the local database.
• C. The device will attempt to authenticate using RADIUS and TACACS+ at the same time.
• D. The device will randomly select the authentication method used for each new login attempt.

Answer: B

NEW QUESTION 10

Which statement is true about using custom login class permissions?

• A. If you allow and deny the same command, the command is allowed_
• B. If you allow and deny the same command, the command is denied.
• C. If you allow and deny the same command, Junos OS will randomly choose the action
• D. If you allow and deny the same command, the Junos OS will fail the commit check.

Answer: B

NEW QUESTION 11

Which two statements are true regarding dynamic routing? (Choose two)

• A. Dynamic routing is used when absolute control of routing parameters is necessary
• B. Dynamic routing allows a device to automatically reroute traffic around a failure
• C. Participating devices dynamically learn routing information from each other
• D. Dynamic routing requires more administrative overhead than static routing

Answer: BC

NEW QUESTION 12

You are creating a route filter that will match the network address of 192.168.64.0/24 In this scenario, which configuration statement will accomplish this task?

• A. from route-filter 192.168.32.0/24 longer
• B. from route-filter 152.168.128.0/24 orlonger
• C. from route-filter 192.168.64.0/24 longer
• D. from route-filter 192.168.64.0/24 orlonger

Answer: D

NEW QUESTION 13

What does the output of the show route forwarding-table command display?

• A. The routing protocol databases in the Routing Engine
• B. The inactive entries in the Routing Engine’s routing table
• C. The Routing Engine’s forwarding table
• D. The Packet Forwarding Engine routing table

Answer: C

NEW QUESTION 14

How does the PFE determine how to forward transit traffic?

• A. The PFE determines network destinations itself based on the RE's routing table.
• B. The PFE uses the forwarding table provided by the RE.
• C. The PFE performs a destination lookup based on its own routing table.
• D. The PFE uses the routing table provided by the

Answer: B

NEW QUESTION 15

You are asked to configure filter-based forwarding Which routing-instance type would you use?

• A. VRF
• B. virtual router
• C. non-forwarding
• D. forwarding

Answer: D

NEW QUESTION 16

You are asked to determine when a Junos device was booted Which command would you use to obtain this information?

• A. show system statistics
• B. show system commit
• C. show system information
• D. show system uptime

Answer: D

NEW QUESTION 17

Which two Juniper Networks products are available in virtual machine (VIM) format? (Choose two.)

• A. vSRX
• B. vIDP
• C. vPTX
• D. vMx

Answer: AD

NEW QUESTION 18

You have received a request from the user, SecurityTeam, to notify their terminal connection only when someone commits a change to the configuration of a specific networking device. Which command would you input in this scenario?

• A. set system syslog user SecurityTeam change-log alert
• B. set system syslog user SecurityTeam change-log any
• C. set system syslog user SecurityTeam interactive-commands any
• D. set system syslog user SecurityTeam interactive-commands

Answer: B

NEW QUESTION 19
......