NEW QUESTION 1
A technician was asked to virtualize four existing PCs before decommissioning them. The resulting VMs are imported into a new VM workstation running a hypervisor on top of an OS Three of the VMs are running property, but the entire system locks up when trying to start the fourth VM. Which of the following should the technician have reviewed prior to creating the VMs to prevent this from occurring? (Select TWO)

• A. Hypervisor requirements
• B. Storage requirements
• C. Resource requirements
• D. Network requirements
• E. Backup requirements
• F. Security requirements

Answer: AF

NEW QUESTION 2
You need to configure your mobile device to send and receive electronic messages from your company. You must use the company’s WLAN as all e-mail services are on default non-secure ports.
The company’s WLAN is broadcasting across the company for easier access. Both incoming and outgoing servers require login credentials.
Use the following parameters:
• Email address tech@techies com
• Password P@SSwOrd
• Pop techies com Port 110 Security. None
• IMAP techies com Port 993 Security SSL
• smtp.techies.com Port 465 Security: TLS
• Company SSID Techies
• Security WPA2
• Passphrase P@SSwOrd
• SSID is not broadcasted INSTRUCTIONS:
Update the mobile device’s parameters to fit the criteria.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
See explanation below

NEW QUESTION 3
A technician is upgrading a user’s smartphone and wants to move all of the applications and contact information quickly to the new device.
Which of the following connection types would work BEST to do this?

• A. NFC
• B. IR
• C. OTG
• D. Bluetooth

Answer: A

NEW QUESTION 4
A customer accidentally drops a laptop while it is charging. The next day, the customer notices the laptop will not turn on and calls a technician to investigate. The technician confirms the laptop will not turn on and calls a technician to investigate. The technician confirms the laptop will not turn on even though it is connected to the power adapter.
Which of the following components is the MOST likely cause of this behavior?

• A. Power adapter
• B. Battery
• C. DC jack
• D. Hard drive

Answer: C

NEW QUESTION 5
A customer contacts the help disk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue? (Select three.)

• A. LCD power inverter
• B. AC adapter
• C. Battery
• D. Processor
• E. VGA card
• F. Motherboard
• G. Backlit keyboard
• H. Wireless antenna

Answer: ACF

NEW QUESTION 6
Which of the following peripheral types is MOST likely to be used to input actions into a PC?

• A. Webcam
• B. Mouse
• C. Monitor
• D. Optical drive

Answer: B

NEW QUESTION 7
Which of the following peripherals would a company use to take inventory quickly and update price tags for products? (Choose two.)

• A. Barcode scanner
• B. Label printer
• C. Magnetic reader
• D. KVM switch
• E. NFC device
• F. Flatted scanner

Answer: AC

NEW QUESTION 8
Which of the following technologies can be used for wireless payments?

• A. NFC
• B. Bluetooth
• C. IR
• D. LTE

Answer: A

NEW QUESTION 9
A technician is configuring a new web server and must have over 10TB of fault-tolerant storage, while minimizing the number of failure points. The applications on the server also require the highest performance available. Which of the following configurations would the technician MOST likely select?

• A. RAID 0 with 1500rpm 15TB drives
• B. RAID 1 with 1000rpm 8TB drives
• C. RAID 5 with 7200rpm 5TB drives
• D. RAID 10 with 5400rpm 6TB drives

Answer: D

NEW QUESTION 10
A technician configures a new printer to be accessible via a print server After setting up the printer on a Windows client machine, the printer prints normally However, after setting up the printer on a macOS client machine, the printer only prints garbled text Which of the following should the technician do to resolve this issue?

• A. Add a macOS-compatible print driver to the printer object on the print server
• B. Configure the Windows client to share the printer with the macOS client
• C. Set the printer on the macOS client to connect to the print server via IPv6
• D. Ensure the network time of the macOS client matches that of the print server.

Answer: A

NEW QUESTION 11
Company management wants to give users the ability to work from home during periods of bad weather. Which of the following would enable the workforce to do this?

• A. NAT
• B. VLAN
• C. VPN
• D. HIPS

Answer: C

NEW QUESTION 12
A customer’s workstation will not boot A technician runs diagnostics on the system and discovers it is set up in a RAID 0 configuration, and a single SATA hard drive failed. The system was set up for Performance. Once repaired the customer request redundancy be built into the system and an increase in performance. Which of the following describes how the technician should set up the new RAID configuration?

• A. RAID 1 configuration that will utilize new SSD.
• B. RAID 2 configuration that will allow the loss of a hard drive without failure.
• C. RAID 6 configuration that will allow the loss of two hard drives without failure.
• D. RAID 10 configuration utilizing HDD

Answer: D

NEW QUESTION 13
A user is having a problem with printing a specific document type.
The network printer OCP shows that the printer is online with no errors. Other users are not having the same issue. The user sends the document to another printer and the document prints.
Which of the following should a technician do FIRST in troubleshooting the problem?

• A. Stop and restart the PC print spooler service.
• B. Verify the user is sending the document to the correct printer queue.
• C. Have each user send the same document to the correct printer queue.
• D. Stop and restart the print server queues, and then have the user resend the document.

Answer: B

NEW QUESTION 14
An engineer is working at a remote site that does not have Internet access. Which of the following features should the engineer use to connect a laptop to the Internet if hotspot functionality is unavailable?

• A. Tethering
• B. Near field communication
• C. Wireless LAN
• D. Virtual private network

Answer: A

NEW QUESTION 15
A user has reported application connectivity problems to the network administrator. The network administrator knows there have been firewall configuration changes recently by a security vendor and believes the issue could be related to a port being closed on the firewall. Which of the following should the network administrator do NEXT?

• A. See if the same application fails on another workstation
• B. Go into the firewall and open the port
• C. Verify system functionality on the user’s workstation
• D. Document the issue for future reference

Answer: C

NEW QUESTION 16
An office has a network that has all computers connected to two switches. The switches are connected with a fiber cable. The computers and switches are all located in the same building. Which of the following network types does this describe?

• A. WAN
• B. PAN
• C. LAN
• D. MAN

Answer: C

NEW QUESTION 17
Which of the following Internet connection types often terminates at a switching center and then requires the use of a different media for the last mile to the customer?

• A. ISDN
• B. DSL
• C. Fiber
• D. Cable

Answer: B

NEW QUESTION 18
Joe, a user , wants his desktop RAID configured to allow the fastest speed and the most storage capacity. His desktop has three hard drives. Which of the following RAID types should a technician configure to achieve this?

• A. 1
• B. 5
• C. 10

Answer: A

NEW QUESTION 19
A laptop is connected to a conference room projector in extended display mode. The desktop icons appear normal on the laptop, but are disproportionate and illegible on the projector screen. Which of the following should the technician check?

• A. Video resolution
• B. HDMI connection
• C. Keystone
• D. Focus

Answer: A

NEW QUESTION 20
A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.
The gaming PC should support the latest games and gaming peripherals.
The virtualization workstation should be able to host several production virtual machines as part of Ann’s home business.
INSTRUCTIONS
Use the tabs at the top to switch between the PCs.
Objects should be placed on the appropriate slot/display areas and can only be used once. All slot/display areas should be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
A technician is hired to install network cable in a crawl space running the length of a hallway. To do so without a fire code violation, which of the following types of cable should the technician run?

• A. Plenum
• B. Fiber
• C. Shielded
• D. Coaxial

Answer: A

NEW QUESTION 22
A technician is troubleshooting a Windows CAD workstation that is running slow. The computer uses RAID 10 and has dual GPU cards. The user states that the same application runs faster on an identical workstation.
Which of the following should the technician perform FIRST to troubleshoot the problem?

• A. Replace the write cache battery.
• B. Check the event log any cache issues.
• C. Clear the RAID configuration file and restart the PC.
• D. Replace the RAID controller write cache module.

Answer: B

NEW QUESTION 23
A user reports that printing on heavy cardstock paper results in the image smearing if touched. When printing on plain paper, the problem does not occur.
Which of the following would be the NEXT troubleshooting step to perform?

• A. Increase the fuser temperature.
• B. Change the paper feed rate.
• C. Clean the transfer roller.
• D. Replace the toner cartridge.

Answer: A

NEW QUESTION 24
Which of the following is designed to function BEST in harsh lighting conditions?

• A. Large tablet
• B. E-reader
• C. Smart watch
• D. Virtual reality headset

Answer: D

NEW QUESTION 25
Which of the following connector types can be plugged into a device both right-side up and upside down?

• A. USB
• B. USB-C
• C. Mini-USB
• D. Micro-USB

Answer: B

NEW QUESTION 26
Ann, a user, needs to attend several day-long conferences and wants to ensure her mobile device will have enough power for these events. She is concerned about wall outlet availability at the conferences and needs to continuously use her device for important updates.
Which of the following should a technician recommend to BEST accommodate Ann’s needs?

• A. Wireless charging pad
• B. Built-in battery case
• C. Extra charging cords
• D. Airplane mode

Answer: A

NEW QUESTION 27
An administrator is configuring a virtualization workstation that will host several mission-critical VMs for the human resources department The workstation will be required to support multiple users at once, and large amounts of data will be accessed daily Which of the following components will BEST meet these requirements? (Select THREE).

• A. Quad-core CPU
• B. Solid-state drives
• C. Additional RAM
• D. Redundant PSUs
• E. RAID 0 array
• F. High-end GPU
• G. RAID 6 array

Answer: ACG

NEW QUESTION 28
A customer’s laptop display has suddenly become very dim. The image of the display can only be seen with a bright, external light, as adjusting the brightness/contracts controls does not cause much change.
Which of the following components MOST likely needs to be replaced?

• A. LCD panel
• B. Inverter
• C. Video card
• D. Digitizer

Answer: B

NEW QUESTION 29
......