NEW QUESTION 1
In Cisco ACI, which two statements are true about contexts? (Choose two.)

• A. A tenant can have multiple contexts.
• B. A context defines a Layer 2 address domain; whereas the bridge domain defines the unique Layer 3 MAC address domain.
• C. A context is equivalent to a virtual routing and forwarding instance in the networking world.
• D. A context can be associated with only one bridge domain.

Answer: AC

NEW QUESTION 2
Which two guidelines or restrictions are valid when using traceroute? (Choose two.)

• A. When the traceroute source or destination is an endpoint, the endpoint must be dynamic and not static.
• B. The traceroute source and destination IP addresses are configured as a combination of IPv4 and IPv6 addresses.
• C. Traceroute only supports endpoint-to-endpoint mode.
• D. A traceroute that is initiated from the tenant endpoints shows the default gateway as an intermediate hop that appears at the ingress leaf switch.

Answer: AD

NEW QUESTION 3
In Cisco ACI, if no contract is attached to the EPG, what is the default behavior?

• A. All ICMP packets are allowed in inter-EPG communication.
• B. All TCP ports are allowed in inter-EPG communication.
• C. Inter-EPG communication is disabled.
• D. Unidirectional traffic is allowed for all protocols in inter-EPG communication.

Answer: D

NEW QUESTION 4
Which two statements describe overlay functionality in the Cisco ACI? (Choose two.)

• A. Forwarding is not limited to or constrained by the encapsulation type or encapsulation network.
• B. Forwarding is limited to and constrained by the encapsulation type of encapsulation network.
• C. External identifiers are not local to the leaf or leaf port.
• D. External identifiers are local to the leaf or leaf port.

Answer: AD

NEW QUESTION 5
Assuming that a service device you are integrating into the Cisco ACI is dedicated to one tenant, where should you configure the logical device and associated concrete devices?

• A. within the tenant context
• B. in the device's base hypervisor UI
• C. within the management tenant
• D. on the service device itself

Answer: A

NEW QUESTION 6
Cisco ACI uses which protocol as Southbound Protocol?

• A. OpFlex
• B. RIP
• C. OpenFlow
• D. EIGRP

Answer: A

NEW QUESTION 7
How can application workload mobility be achieved?

• A. By doing nothing, the fabric dynamically detects resource utilization and balances the fabric.
• B. Configure a VMM domain and attachable entity profile without provisioning VTEP for mobility.
• C. Workload mobility is not supported in ACI.
• D. Provision VTEPs to handle live migrations.

Answer: B

NEW QUESTION 8
What are the two valid SPAN or ERSPAN source options to copy the traffic from the ports as part of troubleshooting? (Choose two.)

• A. one or more switch ports
• B. a Layer 3 subinterface (l3extLIfP)
• C. VLANs or EPGs
• D. a destination IP for the ERSPAN with an IPv6 address

Answer: AC

NEW QUESTION 9
Which two planes are involved in the discovery of hypervisor hosts on the Cisco ACI? (Choose two.)

• A. data
• B. management
• C. control
• D. HSRP
• E. LLDP

Answer: AC

NEW QUESTION 10
In Cisco ACI, what enables inter-End Point Group communications?

• A. contracts
• B. subcontracts
• C. private VLANs
• D. community VLANs

Answer: A

NEW QUESTION 11
What is the Cobra SDK characterized by?

• A. a tool that does is used for orchestration
• B. an unofficial collection of scripts that users have developed
• C. an implementation of the Cisco APIC API that includes a complete copy of the object model
• D. an industry standard used by all API-enabled controllers

Answer: C

NEW QUESTION 12
How can system and pod health scores be viewed?

• A. GUI system dashboard
• B. cumulonimbus collector
• C. Cisco APIC Python
• D. Cisco Health Score Viewer

Answer: A

NEW QUESTION 13
Which entity manages Layer 4 to Layer 7 services in the Cisco ACI?

• A. vendor
• B. Cisco APIC
• C. MP-BGP
• D. ISIS

Answer: B

NEW QUESTION 14
What is the maximum number of spine switches supported in a Cisco ACI cluster?

• A. 4
• B. 6
• C. 8
• D. 10

Answer: B

NEW QUESTION 15
Which three components are directly related to the Cisco ACI automation framework? (Choose three.)

• A. JSON / XML
• B. LLDP
• C. RESTful API
• D. HTTP / HTTPS
• E. STP
• F. OVA

Answer: ACD

NEW QUESTION 16
How do the Cisco APICs initially connect to and configure the fabric in-band?

• A. single link (active/passive), Infra VLAN for spine and leaf configuration
• B. port-channel, Infra VLAN for spine and leaf configuration
• C. single link (active/passive)
• D. single link (active/passive), Layer 3 management interface for spine and leaf configuration

Answer: A

NEW QUESTION 17
What are the general steps to creating a tenant with Cisco ASA services?

• A. Create the tenant, apply the graph to the contract subject, define the Layer 4 to Layer 7 service device cluster, define the logical device content, create the service graph.
• B. Click the Create ASA Services button in the Cisco APIC Management Interface and enter the appropriate text and information.
• C. Create the tenant, define the Layer 4 to Layer 7 service device cluster, create the service graph, define the logical device content, apply the graph to the contract subject.
• D. You should not create the Cisco ASA Services as a tenant; it should be created as a bridge domain.

Answer: C

NEW QUESTION 18
In Cisco ACI, which three statements are true about endpoints and endpoint groups? (Choose three.)

• A. EPGs contain endpoints that have common policy requirements such as security, virtual machine mobility, QoS, or Layer 4 to Layer 7 services.
• B. An EPG can be statically configured by an administrator in the Cisco APIC, or dynamically configured by an automated system such as vCenter or OpenStack.
• C. Policies are applied to individual endpoints rather than EPGs for better efficiency.
• D. Endpoints have an address (identity), a location, attributes (such as version or patch level), and can be physical or virtual.
• E. Endpoints have attributes and can only be virtual.
• F. An EPG can only be configured statically by an administrator in the Cisco APIC.

Answer: ABD

NEW QUESTION 19
Which answer accurately describes the fat tree design implemented as part of the Cisco ACI fabric?

• A. Clos architecture, Cisco APICs, and hosts connect to spine
• B. Policies are enforced on leafs and spines.
• C. Clos architecture, Cisco APICs, and hosts connect to leaf
• D. Policies are enforced on leafs only.
• E. Multitier architecture, Cisco APICs, and hosts connect to spine
• F. Policies are enforced on spines only.
• G. Multitier architecture, Cisco APICs, and hosts connect to leaf
• H. Policies are enforced on leafs only.

Answer: B

NEW QUESTION 20
What is the requirement to establish connectivity in the Cisco ACI fabric between two EPGs in separate tenants?

• A. scope tenant contract
• B. scope private contract
• C. scope intertenant contract
• D. scope global contract

Answer: D

NEW QUESTION 21
In Cisco ACI, general steps are required to create an Application Network Profile. In Cisco ACI, general steps are required to create an Application Network Profile. Which order should the configuration be done?
1) Create connection points between EPGs by using policy constructs.
2) Create policies to define connectivity with permit, deny, log, and so on.
3) Create EPGs.

• A. 3, 2, 1
• B. 1, 2, 3
• C. 2, 3, 1
• D. 1, 3, 2

Answer: A

NEW QUESTION 22
How many Cisco APIC controllers are required to form a Cisco APIC cluster?

• A. three controllers, 3N redundancy
• B. two controllers, N+1 redundancy
• C. three controllers, N+2 redundancy
• D. three controllers, 2N+1 redundancy

Answer: C

NEW QUESTION 23
The Cisco APIC supports which two health score types? (Choose two.)

• A. system-based
• B. policy-based
• C. leaf-based
• D. EPG-based

Answer: AC

NEW QUESTION 24
OpFlex can be used with any tree-based abstract model assuming the tree has what associated with it?

• A. API
• B. port group
• C. URI
• D. PR

Answer: C

NEW QUESTION 25
The Cisco APIC REST API for Cisco APIC accepts and returns HTTP or HTTPS messages that contain which two types of documents? (Choose two.)

• A. HTML
• B. JSON
• C. Chef
• D. XML
• E. Python

Answer: BD

NEW QUESTION 26
......