Cause all that matters here is passing the VMware 3V0-21.21 exam. Cause all that you need is a high score of 3V0-21.21 Advanced Design VMware vSphere 7.x exam. The only one thing you need to do is downloading Exambible 3V0-21.21 exam study guides now. We will not let you down with our money-back guarantee.
Free demo questions for VMware 3V0-21.21 Exam Dumps Below:
NEW QUESTION 1
Which two of the listed requirements would be classified as performance non-functional requirements? (Choose two.)
- A. The vSphere platform must be able to provide a recovery time objective of 30 minutes
- B. The vSphere platform must be able to provide a minimum throughput of 400 MB/s
- C. The vSphere platform must be able to provide N+1 redundancy
- D. The vSphere platform must be able to provide a maximum read latency of 15 ms
- E. The vSphere platform must be able to provide a service-level agreement (SLA) of 99,9%
Answer: BD
NEW QUESTION 2
During a requirements gathering workshop, the customer provides the following requirement that is pertinent to the design of a new vSphere environment:
The Maximum Tolerable Downtime (MTD) for all Tier 1 applications is one hour. Which requirement classification is being gathered for the design documentation?
- A. Manageability
- B. Performance
- C. Availability
- D. Recoverability
Answer: C
NEW QUESTION 3
Refer to the exhibit.
During a requirements gathering workshop, the customer shares the following diagram regarding their availability service-level agreements (SLAs):
The customer wants database application level availability to always take precedence. What should the architect recommend to meet the customer’s requirement?
- A. Enable vSphere HA and add a VM Override with VM Restart Priority set to Highest.
- B. Enable Fault Tolerance.
- C. Enable Sphere HA and maintain the default settings.
- D. Enable vSphere HA and add a VM Override with VM Restart Priority set to Lowest.
Answer: D
NEW QUESTION 4
An architect is considering placement of virtual machines within an existing VMware software-defined data center (SDDC).
During the discovery phase, the following information is documented: Cluster One
Six ESXi hosts
vSphere HA with host failures cluster tolerates = 1
Proactive HA is enabled and set to automated
Fully Automated vSphere DRS
Transparent Page Sharing (TPS) is enabled Cluster Two
Eight ESXi hosts
vSphere HA with host failures cluster tolerates = 1
Proactive HA is disabled
Partially Automated vSphere DRS
Transparent Page Sharing (TPS) is disabled Cluster Three
Three ESXi hosts
vSphere HA with admission control is disabled
Proactive HA is not supported
Transparent Page Sharing (TPS) is disabled Virtual Machine Resource Profile 1
Memory sharing techniques should not be used
Automated initial virtual machine placement
Virtual Machine Resource Profile 2
Memory sharing techniques should not be used
Virtual machines should be automatically restarted in the event of host failure regardless of available resources
Automated initial virtual machine placement
Which two recommendations should the architect make for placement of the virtual machines to meet resource profile requirements? (Choose two.)
- A. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster One.
- B. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster One.
- C. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Two.
- D. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster Two.
- E. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Three.
Answer: DE
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-FEAC3A43-C57E
NEW QUESTION 5
A customer requests a review of its current vSphere platform design.
The following information is noted:
There are three different workload profiles for the virtual machines:
Tier-1 virtual machines operate resource-intensive applications and require dedicated allocations for CPU and RAM.
Tier-2 virtual machines operate internet-facing applications and require access to externally facing networks.
Tier-3 virtual machines operate platform management tools such as vCenter Server and have different lifecycle management requirements.
Tier-1, Tier-2 and Tier-3 virtual machines are all hosted on a single large vSphere cluster.
The Chief Information Security Officer (CISO) has raised concerns that hosting externally facing applications alongside management tools does not meet internal compliance standards.
The Operations team has raised concerns about Tier-1 virtual machines negatively impacting the performance of vCenter Server.
The Operations lead has stated that management changes have consistently been rejected by application teams.
As a result of the review, which recommendation should the architect make regarding the design of this platform?
- A. Separate Tier-1, Tier-2 and Tier-3 virtual machines using dedicated distributed virtual switches (DVS)
- B. Separate Tier-2 virtual machines onto a dedicated cluster
- C. Separate Tier-1, Tier-2 and Tier-3 virtual machines onto dedicated clusters
- D. Separate Tier-1, Tier-2 and Tier-3 virtual machines using resource pools and shares
Answer: C
NEW QUESTION 6
An architect is tasked with reviewing the design of a VMware software-defined data center (SDDC) for a software development company. The platform is used to developing applications and services. It is important that the customer be able to accurately benchmark performance of developed applications.
The platform has recently commissioned new hosts to update the development cluster. The development cluster host configuration is:
4 ESXi hosts with 2 sockets × 16 cores
512 GB RAM divided evenly between sockets
There is no resource contention
The benchmarking cluster host configuration is:
8 ESXi hosts with 2 sockets × 8 cores
256 GB RAM divided evenly between sockets
There is no resource contention
The customer is developing an application that includes a database virtual machine. The application developer states that the database virtual machine performs as required only when allocated 8 vCPUs 256 GB RAM. The database virtual machine performance meets the required levels when run from the development cluster. Performance benchmarking for the database virtual machine yields highly variable results when run from the benchmarking cluster. The application cannot be released without reliable performance benchmarking data.
What is a possible reason for the difference in performance test results between the development and benchmarking clusters?
- A. The database tier breaches a single NUMA node boundary for the benchmarking cluster
- B. The database tier breaches a single NUMA node boundary for the development cluster
- C. The development cluster can support a lower %Ready time per vCPU
- D. The development cluster has more available RAM per host
Answer: C
NEW QUESTION 7
There is a request for approved virtual machine applications through a new vSphere platform’s integrated automation portal. The platform was built following all provided company security guidelines and has been assessed against Sarbanes-Oxley Act of 2002 (SOX) regulations.
The platform has the following characteristics:
vRealize Operations is being used to monitor all clusters.
There is a dedicated ESXi cluster, supporting all management services.
All network traffic is via distributed virtual switches (DVS). There is a dedicated ESXi cluster for all line-of-business applications.
Network traffic is serviced by NSX-T.
There is a dedicated ESXi cluster for virtual desktop infrastructure (VDI).
Network traffic is serviced by NSX-T.
The application owner is requesting approval to install a new service that must be protected as per the Payment Card Industry (PCI) Data Security Standard.
Which additional non-functional requirement should the architect include in the design to support the new service?
- A. The vSphere hosting platform and all PCI application virtual machines must be assessed against Payment Card Industry (PCI) Data Security Standard compliance.
- B. The vSphere hosting platform and all PCI application virtual machines must be assessed for SOX compliance.
- C. The vSphere hosting platform and all PCI application virtual machine network traffic must be routed via NSX-T.
- D. The vSphere hosting platform and all PCI application virtual machines must be monitored using the vRealize Operations Compliance Pack for Payment Card Industry.
Answer: A
NEW QUESTION 8
An architect is designing a vSphere environment for a customer and learns that the customer has:
A single vSphere cluster
Two storage arrays with different RAID capabilities
Which two design decisions should the architect make to maximize data availability and data performance for this customer? (Choose two.)
- A. Use Storage DRS.
- B. Use VMDK anti-affinity rules.
- C. Use multiple datastores for heartbeat.
- D. Use a minimum of three storage arrays.
- E. Use VM to host DRS rules.
Answer: AC
NEW QUESTION 9
In a meeting to discuss the minimum viable product (MVP) deployment of a new customer-facing application, the key stakeholder shares details of the application components and the application administrators share details of performance and integrity tests for the application.
The application will be made up of the following components:
A web server
-Steps to confirm the web server is operating correctly will take 15 minutes after the application server is online.
An application server
-Steps to confirm application server integrity will take 15 minutes after the database is online.
A database server
-The database server will be managed by a database administrator, with an agreed service-level agreement (SLA) to restore and validate database services within one hour.
The existing VMware infrastructure offers a recovery point objective (RPO) of 5 minutes and recovery time objective (RTO) of 15 minutes through a combination of backups and replication.
In the event of an outage impacting all three application components, how long will it take for the application to recover and complete all checks?
- A. 15 minutes
- B. 60 minutes
- C. 105 minutes
- D. 90 minutes
Answer: C
Explanation:
15 restore VMs + 60 restore and test DB + 15 test app server + 15 test web server
NEW QUESTION 10
Following a recent acquisition, the architect learns that both companies use vSphere on-premise and will need to combine the data centers into one. The acquired company's licenses will not be renewed for cost-savings related to the acquisition. All consumed vSphere licenses must have active support to support line-of-business operations. The merged environment must maintain 25% spare capacity. The architect has a small budget remaining unallocated for hardware.
The architect has calculated that the current vSphere environment can absorb the acquired company's virtual machines but the cluster will run at 90% memory utilization and at 50% CPU utilization.
Which design decision can the architect make to incorporate the new company's virtual machines into the combined vSphere environment?
- A. Migrate the acquired company's virtual machines into the vSphere environment as it will currently fit.
- B. Use the current budget to add memory to the cluster to increase each ESXi host's capacity and add the new virtual machines.
- C. Purchase extra hosts to add to the cluster in anticipation of adding the acquired company's virtual machines.
- D. Purchase new licenses for some of the acquired company's ESXi hosts and add them to the cluster to hold the acquired company's virtual machines.
Answer: B
NEW QUESTION 11
Refer to the exhibit.
During a requirements gathering workshop, the architect shares the following diagram:
What should the architect recommend for guaranteed throughput for each service?
- A. Use explicit failover order with pNIC0 as Active for ESXi Management and VM Network Use explicit failover order with pNIC1 as Active for backup networkUse explicit failover order with pNIC2 as Active for vMotion Use explicit failover order with pNIC3 as Active for replication
- B. Use the Route Based on IP Hash for ESXi management and VM network Use the Route Based on IP Hash for backup networkUse the Route Based on the Originating Virtual Port for vMotion Use failover with pNIC3 as Active for replication
- C. Create a link aggregation group (LAG) for vDS_01Use the Route Based on Physical NIC Load for vMotion Use the Route Based on Physical NIC Load for replication
- D. Use the Route Based on IP Hash for ESXi management and VM network Use failover with pNIC1 as Active for backup networkCreate a link aggregation group (LAG) for vDS_02
Answer: A
NEW QUESTION 12
During a requirements gathering workshop, the customer provides the following requirement:
A new vSphere platform must be designed securely and all interfaces must be protected against potential snooping.
How should this non-functional security requirement be documented?
- A. Interfaces must be audited.
- B. Encrypted channels must be used for all communications.
- C. Unauthorized access to interfaces must be reported within 15 minutes.
- D. Communications must be through Private VLANs (PVLAN).
Answer: A
NEW QUESTION 13
An architect is designing storage for a new vSphere environment to meet the following requirements: Asynchronous replication is required between two sites.
The impact on the storage layer should not impact the performance of the compute layer.
Each application tier will require different replication attributes.
Virtual machine live migration across compute and storage must be supported.
Virtual machine aware back up will be leveraged.
Operational management overhead should be minimized.
Operational automation should be supported.
Which storage design recommendations would meet the requirements?
- A. Two new Fibre Channel storage arrays will be deployed, one at either site.Each application tier will be initially provisioned a new LU
- B. Data replication will be offloaded to the new arrays.
- C. Two new vSphere clusters enabled with vSAN will be deployed, one at either sit
- D. vSAN will be used to provide policy-based management for each application tier.vSphere Replication will be used to replicate the virtual machine data in an asynchronous configuration.
- E. Two new ISCSI storage arrays will be deployed, one at either site.Each application tier will be initially provisioned a new LU
- F. Data replication will be offloaded to the new arrays.
- G. Two new storage arrays will be deployed, one at either site.vSphere Volumes (vVOLs) will be used to provide policy-based management for each application tie
- H. Data replication will be offloaded to the new arrays.
Answer: B
NEW QUESTION 14
An architect is preparing a design for a customer. Based on requirements, the architect recommends an HCI- based infrastructure with all-flash architecture. During the assessment, it is confirmed that the network throughput generated by virtual machines does not exceed 150 Mb/s.
What is the minimum number and type of network adapters in each server that the architect can recommend to ensure requirements are met and there is no single point of failure?
- A. Two 1 GbE network adapters per server
- B. Four 1 GbE network adapters per server
- C. Four 10 GbE network adapters per server
- D. Two 10 GbE network adapters per server
Answer: C
NEW QUESTION 15
During a requirements gathering workshop, the customer’s Chief Information Security Office (CISO) provides the following requirements that are pertinent to the design of a new vSphere environment:
All operating system critical patches must be installed within 24 hours of release.
All virtual machine templates must be updated every three months in line with company policy.
Which requirement classification is being gathered for the design documentation?
- A. Security
- B. Manageability
- C. Recoverability
- D. Availability
Answer: A
Explanation:
This is lifecycle management function. The requirement is system critical patches, not system security patches.
NEW QUESTION 16
An architect is reviewing a physical storage design. The customer has specified that a new active-passive based storage array will be used to provide storage for the vSphere clusters.
Which configuration should for the architect recommended?
- A. VMW_SATP_LOCAL
- B. VMW_PSP_MRU
- C. VMW_SATP_DEFAULT_AA
- D. VMW_PSP_FIXED
Answer: B
NEW QUESTION 17
An architect is designing a VMware solution for a customer based on the following information:
The solution must support the ability to migrate workloads between hosts within a cluster.
The solution must support resource management priorities.
The solution must support the ability to connect virtual machines directly to LUNs.
The solution should use existing IPv4 based network infrastructure.
There is no budget for additional physical hardware.
Which two design decisions could the architect make to meet these requirements? (Choose two.)
- A. The ESXi hosts will leverage Fibre Channel (FC)
- B. The ESXi hosts will leverage NFS 3
- C. The ESXi hosts will leverage Fibre Channel over Ethernet (FCoE)
- D. The ESXi hosts will leverage iSCSI
- E. The ESXi hosts will leverage NFS 4.1
Answer: BD
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-8A929FE4-1207-4C Starting from vSphere 7.0, VMware no longer supports software FCoE in production environments.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-6B49866F-7005-40
NEW QUESTION 18
An architect is finalizing the design for a new vSphere platform based on the following information:
All Windows virtual machines will be hosted on a dedicated cluster for licensing purposes.
All Linux virtual machines will be hosted on a dedicated cluster for licensing purposes. All management virtual machines will be hosted on a dedicated cluster.
A total of ten physical sites will be used to host virtual machines.
In the event of one physical datacenter becoming unavailable, the manageability of the virtual infrastructure in the remaining data centers should not be impacted.
Access to configure the management virtual machines via vCenter Server must be controlled through the management Active Directory domain.
Access to configure the Windows and Linux virtual machines must be controlled through the resource Active Directory domain.
The management and resource Active Directory domains are part of separate Active Directory forests and do not have any trusts between them.
The design will use Active Directory with Integrated Windows Authentication.
How should the architect document the vCenter Server configuration for this design?
- A. Deploy a vCenter server for the management cluster.Deploy a vCenter Server for all remaining cluster
- B. Create a shared SSO domain for each physical site.
- C. Deploy a vCenter Server for the management cluster.Deploy a vCenter Server for all remaining cluster
- D. Create a shared SSO domain across all physical sites.
- E. Deploy a vCenter Server for the management cluster with a dedicated SSO domain.Deploy a vCenter Server for all remaining clusters and use a dedicated SSO domain for each physical site.
- F. Deploy a vCenter Server for the management cluster with a dedicated SSO domain.Deploy a vCenter Server for all remaining clusters and use a dedicated SSO domain into a single physical site.
Answer: B
NEW QUESTION 19
......
P.S. Easily pass 3V0-21.21 Exam with 88 Q&As Allfreedumps.com Dumps & pdf Version, Welcome to Download the Newest Allfreedumps.com 3V0-21.21 Dumps: https://www.allfreedumps.com/3V0-21.21-dumps.html (88 New Questions)