NEW QUESTION 1
A customer is running a virtualized application with the data stored on their server’s local storage. As the storage space is getting full, they are looking into a new storage system. Their IT generalist would like to use a single management interface for the new solution.
Which solution should you recommend to the customer?

• A. HPE Nimble HF20
• B. HPE MSA 2052
• C. HPE SimpliVity 380
• D. HPE 3PAR StoreServ 8400

Answer: D

NEW QUESTION 2
A customer requires front panel access for their Gen10 servers. What is required to meet this need?

• A. a USB 2.0 Ethernet adapter
• B. an installed iLo Advance license
• C. Secure Boot enabled
• D. Two-factor authentication enabled

Answer: B

NEW QUESTION 3
Based on the scenario provided, which service should you recommend*?

• A. HPE 3PAR StoreServ Data Migration Service
• B. HPE File Data Migration Service
• C. HPE Migration Service for Exchange
• D. HPE Migration Service for Office 365

Answer: D

NEW QUESTION 4
Which HPE tool is used to access 3PAR performance information?

• A. NinjaCrawler
• B. SAF Collect
• C. SAF Analyze
• D. NinjaStars

Answer: D

NEW QUESTION 5
In preparation for a customer presentation, you need to provide meaningful estimates of cooling requirements for HPE ProLiant, HPE Apollo, and HPE Synergy servers.
What should you use?

• A. HPE Synergy Planning Tool
• B. HPE Proposal Web
• C. HPE Server Memory Configurator
• D. HPE Power Advisor

Answer: D

NEW QUESTION 6
A small customer needs to order a DL325 with VMware licenses and have the solution delivered right away. Which tool should you use to generate an order?

• A. HPE AIhean Tools
• B. HPE One Config Advanced
• C. HPE iQuote Universal
• D. HPE Proposal Web

Answer: C

NEW QUESTION 7
A customer has the following design requirements:
• Support for 16 Gb Fibre Channel
• All SAN elements must be managed by the SAN team
• All SAN elements need to be managed by the existing tools
Which component must be included In the design to meet the customer's requirements?

• A. HPE Virtual Connect SE 40 Gb F8 Module for HPE Synergy
• B. HPE Virtual Connect SE 16 Gb FC Module for HPE Synergy
• C. HPE Synergy 8 Gb FC License Upgrade
• D. Brocade 16 Gb Fibre Channel SAN Switch Module for HPE Synergy

Answer: A

NEW QUESTION 8
While discussing data reduction technologies, a customer is concerned their data may not compress or deduplicate well.
Which tools should you use to read actual customer data and assess the amount of data reduction savings they may achieve? (Choose two.)

• A. NinjaCrawler
• B. Nimble Space Savings Estimator
• C. NinjaSTARS for Nimble
• D. NinjaSTARS

Answer: BD

NEW QUESTION 9
Your need to architect a SQL Database consolidation solution, based on the HPE reference architecture for SQL 2021 The customer is moving from Oracle on Linux and wants to stay on Linux and migrate to a tower-cost solution
Which server should you recommend?

• A. HPE DL560 Gen10 running Red Hat Linux Server
• B. HPE DL380 Gen10 running Red Hat Linux Server
• C. HPE DL380 Gen10 running Microsoft Windows Server 2021
• D. HPE DL560 Gen10 running CentOS Linux Server

Answer: B

NEW QUESTION 10
A customer is thinking about a new solution to run their Line of Business (LOB) application. They are considering an HPE SimpliVity solution.
Which deployment requirement should be communicated to the customer?

• A. The application has to run virtualized.
• B. The solution only supports HPE switches.
• C. The solution requires a minimum of three nodes.
• D. The solution requires FC connectivity

Answer: A

NEW QUESTION 11
You propose an HPE 3PAR StoreServ 8200 array for a customer who needs 900 TiB raw storage space. After the proposal was created, the customer went through with a competitor acquisition. Now they need to accommodate 1600 TiB.
What should you propose to the customer?

• A. Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 4-node configuration with the needed amount of drives.
• B. Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 2-node configuration with a 2-node upgrade and the needed amount of drives.
• C. Upgrade the 3PAR StoreServ 8200 2-node configuration with four additional nodes and the needed amount of drives.
• D. Upgrade the 3PAR StoreServ 8200 2-node configuration with Data Optimization Software Suite and the needed amount of drives.

Answer: A

NEW QUESTION 12
You are designing a solution that will utilize HPE SimpliVity as the solution platform.
Which additional components are required and should be documented in your design? (Choose two.)

• A. SCCM
• B. HPE SimpliVity Arbiter Service
• C. SCOM
• D. vCenter or SCVMM

Answer: BD

NEW QUESTION 13
You are designing a solution for a data-intensive application running on a ProLiant DL380 Gen10 server, where performance will be critical.
Which tool should you use to validate that your design meets the workload requirements?

• A. HPE Server Memory Configurator
• B. HPE Storage Sizer
• C. HPE Solid-State Drive Selector Tool
• D. HPE InfoSight

Answer: B

NEW QUESTION 14
Refer to the Exhibit.

A customer’s requirements include minimal licensing and simple management. The data must be secured at rest. The solution must have the smallest footprint possible.
Which component must be added to the bill of materials to meet these customer requirements?

• A. HPE 3PAR All-in S-sys SW Current E-Media
• B. HPE 3PAR Policy Manager Software E-LTU
• C. HPE 3PAR 8400 All-inc Multi-sys SW E-LTU
• D. HPE 3PAR 8400 Data Encryption E-LTU

Answer: D

NEW QUESTION 15
The customer has an HPE Nimble HF40.
The customer’s application needs have changed, and they now require more performance from their current storage solution.
What should you do to address the customer’s new requirements?

• A. Grow the FDR (flash-to-disk) ration by adding SSDs to the Dual Flash Carries (DFC).
• B. Enable the HPE Advanced Data Services license to enable tiering.
• C. Upgrade the existing controller pair with a higher model number.
• D. Add disks and SSDs to the current array.

Answer: D

NEW QUESTION 16
A customer is asking for the latest version of the HPE Nimble Storage Integration Guide. Where can the customer download the guide?

• A. HPE SPOCK
• B. HPE Product Bulletin
• C. HPE InfoSight
• D. HPE Information Library

Answer: C

NEW QUESTION 17
Match the appropriate server, storage, or networking platform to the workload. (Choose all that apply.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18
A customer is concerned that they might not have enough cooling capacity in their datacenter to support your proposed HPE server and storage solution
Which tool should you use to confirm your solution will meet their requirements'?

• A. HPE OneView
• B. HPE Assessment Foundry
• C. HPE infoSight
• D. HPE Power Advisor

Answer: A

NEW QUESTION 19
A customer needs a VMware Horizon VDI solution with accelerated GPU support. They need the highest density GPU solution available.
Which solution should you recommend?

• A. HPE WS460c Gen9 Graphics Server Blade with graphics expansion
• B. HPE Apollo r2600 with RCM Module
• C. HPE Synergy SY 480 with multi-MXM expansion module
• D. HPE DL360 Gen10 with primary GPU riser

Answer: C

NEW QUESTION 20
Based on assessment and placement evaluations results, match the product to its levels of reliability, functionality, cost, or availability. (Choose all that apply.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
A customer has expressed concerns about the security of using RESTful API to do a survey against their existing infrastructure.
What should you say about the REST client to alleviate the customer's concerns?

• A. It uses SNMP v2.
• B. It uses HTTPS.
• C. It uses SNMP v3
• D. It uses WBEM

Answer: B

NEW QUESTION 22
......